- Jan 27, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220124184125.121143506@linuxfoundation.org Tested-by:
Ronald Warsow <rwarsow@gmx.de> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Zan Aziz <zanaziz313@gmail.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Rudi Heitbaum <rudi@heitbaum.com> Tested-by:
Ron Economos <re@w6rz.net> Link: https://lore.kernel.org/r/20220125155447.179130255@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Justin M. Forbes <jforbes@fedoraproject.org> Tested-by:
Rudi Heitbaum <rudi@heitbaum.com> Tested-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
Ronald Warsow <rwarsow@gmx.de> Tested-by:
<re@w6rz.net> Tested-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by:
Fox Chen <foxhlchen@gmail.com> Tested-by:
Scott Bruce <smbruce@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
commit 87d6576d upstream. The name of the package with ctexhook.sty is different on Debian/Ubuntu. Reported-by:
Akira Yokosawa <akiyks@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Tested-by:
Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/63882425609a2820fac78f5e94620abeb7ed5f6f.1641429634.git.mchehab@kernel.org Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauro Carvalho Chehab authored
commit 7baab965 upstream. After a change meant to fix support for oriental characters (Chinese, Japanese, Korean), ctex stylesheet is now a requirement for PDF output. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/165aa6167f21e3892a6e308688c93c756e94f4e0.1641243581.git.mchehab@kernel.org Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ranjani Sridharan authored
commit 96da1740 upstream. During system suspend, paused streams do not get suspended. Therefore, we need to explicitly free these PCMs in the DSP and free the associated DAPM widgets so that they can be set up again during resume. Fixes: 5fcdbb2d ("ASoC: SOF: Add support for dynamic pipelines") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Paul Olaru <paul.olaru@oss.nxp.com> Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211123171606.129350-3-kai.vehmanen@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pierre-Louis Bossart authored
commit 01429183 upstream. Older firmware prior to ABI 3.19 has a dependency where the scheduler widgets need to be setup last. Moving the call to sof_widget_setup() before the pipeline_complete() call also helps remove the need for the 'reverse' direction when walking through the widget list - this was only working because of the topology macros but the topology does not require any order. Fixes: 5fcdbb2d ("ASoC: SOF: Add support for dynamic pipelines") Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211123171606.129350-1-kai.vehmanen@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ranjani Sridharan authored
commit b2ebcf42 upstream. Free widgets for static pipelines in sof_tear_down_pipelines(). But this feature is unavailable in older firmware with ABI < 3.19. Just reset widget use_count's for this case. This would ensure that the secondary cores enabled required for topology setup are powered down properly before the primary core is powered off during system suspend. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-8-kai.vehmanen@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ranjani Sridharan authored
commit 7cc7b9ba upstream. Remove the function sof_load_pipeline_ipc() and directly send the IPC instead. The pipeline core is already enabled with the call to sof_pipeline_core_enable() in sof_widget_setup(). Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211119192621.4096077-7-kai.vehmanen@linux.intel.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit ecebb966 upstream. KVM forbids KVM_SET_CPUID2 after KVM_RUN was performed on a vCPU unless the supplied CPUID data is equal to what was previously set. Test this. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-5-vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit 9e6d484f upstream. In preparation to reusing the existing 'get_cpuid_test' for testing "KVM_SET_CPUID{,2} after KVM_RUN" rename it to 'cpuid_test' to avoid the confusion. No functional change intended. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-4-vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit c6617c61 upstream. Commit feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") forbade changing CPUID altogether but unfortunately this is not fully compatible with existing VMMs. In particular, QEMU reuses vCPU fds for CPU hotplug after unplug and it calls KVM_SET_CPUID2. Instead of full ban, check whether the supplied CPUID data is equal to what was previously set. Reported-by:
Igor Mammedov <imammedo@redhat.com> Fixes: feb627e8 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-3-vkuznets@redhat.com> Cc: stable@vger.kernel.org [Do not call kvm_find_cpuid_entry repeatedly. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vitaly Kuznetsov authored
commit ee3a5f9e upstream. kvm_update_cpuid_runtime() mangles CPUID data coming from userspace VMM after updating 'vcpu->arch.cpuid_entries', this makes it impossible to compare an update with what was previously supplied. Introduce __kvm_update_cpuid_runtime() version which can be used to tweak the input before it goes to 'vcpu->arch.cpuid_entries' so the upcoming update check can compare tweaked data. No functional change intended. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20220117150542.2176196-2-vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrey Konovalov authored
commit e073e5ef upstream. Make do_kmem_cache_size_bulk() destroy the cache it creates. Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com Fixes: 03a9349a ("lib/test_meminit: add a kmem_cache_alloc_bulk() test") Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Moshe Tal authored
commit 429e3d12 upstream. Wrong hash sends single stream to multiple output interfaces. The offset calculation was relative to skb->head, fix it to be relative to skb->data. Fixes: a815bde5 ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff") Reviewed-by:
Jussi Maki <joamaki@gmail.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Moshe Tal <moshet@nvidia.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alistair Popple authored
commit 87c01d57 upstream. hmm_range_fault() can be used instead of get_user_pages() for devices which allow faulting however unlike get_user_pages() it will return an error when used on a VM_MIXEDMAP range. To make hmm_range_fault() more closely match get_user_pages() remove this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL case in hmm_vma_handle_pte(). Rather than replicating the logic of vm_normal_page() call it directly and do a check for the zero pfn similar to what get_user_pages() currently does. Also add a test to hmm selftest to verify functionality. Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com Fixes: da4c3c73 ("mm/hmm/mirror: helper to snapshot CPU page table") Signed-off-by:
Alistair Popple <apopple@nvidia.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaoqian Lin authored
commit 99218cbf upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 11597885 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Schiffer authored
commit d8adf5b9 upstream. dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but this has never worked: The /proc/self/fds/... paths passed by the shell will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts, but even with this check removed, the function cannot work: hexdump will eat up the DTB magic, making the subsequent dtc call fail, as a pipe cannot be rewound. Simply remove this broken example, as there is already an alternative one that works fine. Fixes: 10eadc25 ("dtc: create tool to diff device trees") Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxim Mikityanskiy authored
commit de2d807b upstream. The attach callback of struct Qdisc_ops is used by only a few qdiscs: mq, mqprio and htb. qdisc_graft() contains the following logic (pseudocode): if (!qdisc->ops->attach) { if (ingress) do ingress stuff; else do egress stuff; } if (!ingress) { ... if (qdisc->ops->attach) qdisc->ops->attach(qdisc); } else { ... } As we see, the attach callback is not called if the qdisc is being attached to ingress (TC_H_INGRESS). That wasn't a problem for mq and mqprio, since they contain a check that they are attached to TC_H_ROOT, and they can't be attached to TC_H_INGRESS anyway. However, the commit cited below added the attach callback to htb. It is needed for the hardware offload, but in the non-offload mode it simulates the "do egress stuff" part of the pseudocode above. The problem is that when htb is attached to ingress, neither "do ingress stuff" nor attach() is called. It results in an inconsistency, and the following message is printed to dmesg: unregister_netdevice: waiting for lo to become free. Usage count = 2 This commit addresses the issue by running "do ingress stuff" in the ingress flow even in the attach callback is present, which is fine, because attach isn't going to be called afterwards. The bug was found by syzbot and reported by Eric. Fixes: d03b195b ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reported-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sam Protsenko authored
commit 33950f9a upstream. Exynos7 watchdog driver is clearly indicating that its dts node must define syscon phandle property. That was probably forgotten, so add it. Signed-off-by:
Sam Protsenko <semen.protsenko@linaro.org> Fixes: 2b9366b6 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7") Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211107202943.8859-2-semen.protsenko@linaro.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 640f35b8 upstream. This property was already mentioned in the old textual bindings amlogic,meson-vpu.txt, but got dropped during conversion. Adding it back similar to amlogic,gx-vdec.yaml. Fixes: 6b9ebf1e ("dt-bindings: display: amlogic, meson-vpu: convert to yaml") Signed-off-by:
Alexander Stein <alexander.stein@mailbox.org> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211219094155.177206-1-alexander.stein@mailbox.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Stein authored
commit 22bf4047 upstream. This is used in meson-gx and meson-g12. Add the property to the binding. This fixes the dtschema warning: hdmi-tx@c883a000: 'sound-name-prefix' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Alexander Stein <alexander.stein@mailbox.org> Fixes: 376bf52d ("dt-bindings: display: amlogic, meson-dw-hdmi: convert to yaml") Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211223122434.39378-2-alexander.stein@mailbox.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit baa59504 upstream. Clang static analysis reports this issue ocelot_flower.c:563:8: warning: 1st function call argument is an uninitialized value !is_zero_ether_addr(match.mask->dst)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The variable match is used before it is set. So move the block. Fixes: 75944fda ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Claudiu Beznea authored
commit f1131b9c upstream. On a setup with KSZ9131 and MACB drivers it happens on suspend path, from time to time, that the PHY interrupt arrives after PHY and MACB were suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this case the phy_read() at the beginning of kszphy_handle_interrupt() will fail (as MACB driver is suspended at this time) leading to phy_error() being called and a stack trace being displayed on console. To solve this .suspend/.resume functions for all KSZ devices implementing .handle_interrupt were replaced with kszphy_suspend()/kszphy_resume() which disable/enable interrupt before/after calling genphy_suspend()/genphy_resume(). The fix has been adapted for all KSZ devices which implements .handle_interrupt but it has been tested only on KSZ9131. Fixes: 59ca4e58 ("net: phy: micrel: implement generic .handle_interrupt() callback") Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit 1771afd4 upstream. Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that takes NET_IP_ALIGN into account, but fail to use it appropriately when storing incoming packets in memory. This results in the IPv4 source and destination addresses to appear misaligned in memory, which causes aligment faults that need to be fixed up in software. So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed. This gets rid of any alignment faults on the RX path on a Beaglebone White. Fixes: 9ed4050c ("net: ethernet: ti: cpsw: add XDP support") Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Russell King (Oracle) authored
commit 5765cee1 upstream. Commit 7cfa9c92 ("net: sfp: avoid power switch on address-change modules") unintetionally changed the semantics for high power modules without the digital diagnostics monitoring. We repeatedly attempt to read the power status from the non-existing 0xa2 address in a futile hope this failure is temporary: [ 8.856051] sfp sfp-eth3: module NTT 0000000000000000 rev 0000 sn 0000000000000000 dc 160408 [ 8.865843] mvpp2 f4000000.ethernet eth3: switched to inband/1000base-x link mode [ 8.873469] sfp sfp-eth3: Failed to read EEPROM: -5 [ 8.983251] sfp sfp-eth3: Failed to read EEPROM: -5 [ 9.103250] sfp sfp-eth3: Failed to read EEPROM: -5 We previosuly assumed such modules were powered up in the correct mode, continuing without further configuration as long as the required power class was supported by the host. Restore this behaviour, while preserving the intent of subsequent patches to avoid the "Address Change Sequence not supported" warning if we are not going to be accessing the DDM address. Fixes: 7cfa9c92 ("net: sfp: avoid power switch on address-change modules") Reported-by:
照山周一郎 <teruyama@springboard-inc.jp> Tested-by:
照山周一郎 <teruyama@springboard-inc.jp> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Horatiu Vultur authored
commit c0b7f7d7 upstream. In the blamed commit, the call to the function switchdev_bridge_port_offload was passing the wrong argument for atomic_nb. It was ocelot_netdevice_nb instead of ocelot_swtchdev_nb. This patch fixes this issue. Fixes: 4e51bf44 ("net: bridge: move the switchdev object replay helpers to "push" mode") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit 214b3369 upstream. Clang static analysis reports this problem mtk_eth_soc.c:394:7: warning: Branch condition evaluates to a garbage value if (err) ^~~ err is not initialized and only conditionally set. So intitialize err. Fixes: 7e538372 ("net: ethernet: mediatek: Re-add support SGMII") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Slark Xiao authored
commit f542cdfa upstream. In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info. This value shall be used for whole mhi if it's given a value for a specific product. But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU. 'mru_default' shall have higher priority than MHI_DEFAULT_MRU. And after checking, this change could help fix a data connection lost issue. Fixes: 5c2c8531 ("bus: mhi: pci-generic: configurable network interface MRU") Signed-off-by:
Shujun Wang <wsj20369@163.com> Signed-off-by:
Slark Xiao <slark_xiao@163.com> Reviewed-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Oltean authored
commit 80f15f3b upstream. The following command sequence: tc qdisc del dev swp0 clsact tc qdisc add dev swp0 ingress_block 1 clsact tc qdisc add dev swp1 ingress_block 1 clsact tc filter add block 1 flower action drop tc qdisc del dev swp0 clsact produces the following NPD: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 pc : vcap_entry_set+0x14/0x70 lr : ocelot_vcap_filter_del+0x198/0x234 Call trace: vcap_entry_set+0x14/0x70 ocelot_vcap_filter_del+0x198/0x234 ocelot_cls_flower_destroy+0x94/0xe4 felix_cls_flower_del+0x70/0x84 dsa_slave_setup_tc_block_cb+0x13c/0x60c dsa_slave_setup_tc_block_cb_ig+0x20/0x30 tc_setup_cb_reoffload+0x44/0x120 fl_reoffload+0x280/0x320 tcf_block_playback_offloads+0x6c/0x184 tcf_block_unbind+0x80/0xe0 tcf_block_setup+0x174/0x214 tcf_block_offload_cmd.isra.0+0x100/0x13c tcf_block_offload_unbind+0x5c/0xa0 __tcf_block_put+0x54/0x174 tcf_block_put_ext+0x5c/0x74 clsact_destroy+0x40/0x60 qdisc_destroy+0x4c/0x150 qdisc_put+0x70/0x90 qdisc_graft+0x3f0/0x4c0 tc_get_qdisc+0x1cc/0x364 rtnetlink_rcv_msg+0x124/0x340 The reason is that the driver isn't prepared to receive two tc filters with the same cookie. It unconditionally creates a new struct ocelot_vcap_filter for each tc filter, and it adds all filters with the same identifier (cookie) to the ocelot_vcap_block. The problem is here, in ocelot_vcap_filter_del(): /* Gets index of the filter */ index = ocelot_vcap_block_get_filter_index(block, filter); if (index < 0) return index; /* Delete filter */ ocelot_vcap_block_remove_filter(ocelot, block, filter); /* Move up all the blocks over the deleted filter */ for (i = index; i < block->count; i++) { struct ocelot_vcap_filter *tmp; tmp = ocelot_vcap_block_find_filter_by_index(block, i); vcap_entry_set(ocelot, i, tmp); } what will happen is ocelot_vcap_block_get_filter_index() will return the index (@index) of the first filter found with that cookie. This is _not_ the index of _this_ filter, but the other one with the same cookie, because ocelot_vcap_filter_equal() gets fooled. Then later, ocelot_vcap_block_remove_filter() is coded to remove all filters that are ocelot_vcap_filter_equal() with the passed @filter. So unexpectedly, both filters get deleted from the list. Then ocelot_vcap_filter_del() will attempt to move all the other filters up, again finding them by index (@i). The block count is 2, @index was 0, so it will attempt to move up filter @i=0 and @i=1. It assigns tmp = ocelot_vcap_block_find_filter_by_index(block, i), which is now a NULL pointer because ocelot_vcap_block_remove_filter() has removed more than one filter. As far as I can see, this problem has been there since the introduction of tc offload support, however I cannot test beyond the blamed commit due to hardware availability. In any case, any fix cannot be backported that far, due to lots of changes to the code base. Therefore, let's go for the correct solution, which is to not call ocelot_vcap_filter_add() and ocelot_vcap_filter_del(), unless the filter is actually unique and not shared. For the shared filters, we should just modify the ingress port mask and call ocelot_vcap_filter_replace(), a function introduced by commit 95706be1 ("net: mscc: ocelot: create a function that replaces an existing VCAP filter"). This way, block->rules will only contain filters with unique cookies, by design. Fixes: 07d985ee ("net: dsa: felix: Wire up the ocelot cls_flower methods") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergey Shtylyov authored
commit 9deb48b5 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Oltean authored
commit 33cb0ff3 upstream. Since commit b3964807 ("net: mscc: ocelot: disable flow control on NPI interface"), flow control should be disabled on the DSA CPU port when used in NPI mode. However, the commit blamed in the Fixes: tag below broke this, because it allowed felix_phylink_mac_link_up() to overwrite SYS_PAUSE_CFG_PAUSE_ENA for the DSA CPU port. This issue became noticeable since the device tree update from commit 8fcea7be ("arm64: dts: ls1028a: mark internal links between Felix and ENETC as capable of flow control"). The solution is to check whether this is the currently configured NPI port from ocelot_phylink_mac_link_up(), and to not modify the statically disabled PAUSE frame transmission if it is. When the port is configured for lossless mode as opposed to tail drop mode, but the link partner (DSA master) doesn't observe the transmitted PAUSE frames, the switch termination throughput is much worse, as can be seen below. Before: root@debian:~# iperf3 -c 192.168.100.2 Connecting to host 192.168.100.2, port 5201 [ 5] local 192.168.100.1 port 37504 connected to 192.168.100.2 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 28.4 MBytes 238 Mbits/sec 357 22.6 KBytes [ 5] 1.00-2.00 sec 33.6 MBytes 282 Mbits/sec 426 19.8 KBytes [ 5] 2.00-3.00 sec 34.0 MBytes 285 Mbits/sec 343 21.2 KBytes [ 5] 3.00-4.00 sec 32.9 MBytes 276 Mbits/sec 354 22.6 KBytes [ 5] 4.00-5.00 sec 32.3 MBytes 271 Mbits/sec 297 18.4 KBytes ^C[ 5] 5.00-5.06 sec 2.05 MBytes 270 Mbits/sec 45 19.8 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-5.06 sec 163 MBytes 271 Mbits/sec 1822 sender [ 5] 0.00-5.06 sec 0.00 Bytes 0.00 bits/sec receiver After: root@debian:~# iperf3 -c 192.168.100.2 Connecting to host 192.168.100.2, port 5201 [ 5] local 192.168.100.1 port 49470 connected to 192.168.100.2 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 112 MBytes 941 Mbits/sec 259 143 KBytes [ 5] 1.00-2.00 sec 110 MBytes 920 Mbits/sec 329 144 KBytes [ 5] 2.00-3.00 sec 112 MBytes 936 Mbits/sec 255 144 KBytes [ 5] 3.00-4.00 sec 110 MBytes 927 Mbits/sec 355 105 KBytes [ 5] 4.00-5.00 sec 110 MBytes 926 Mbits/sec 350 156 KBytes [ 5] 5.00-6.00 sec 110 MBytes 925 Mbits/sec 305 148 KBytes [ 5] 6.00-7.00 sec 110 MBytes 924 Mbits/sec 320 143 KBytes [ 5] 7.00-8.00 sec 110 MBytes 925 Mbits/sec 273 97.6 KBytes [ 5] 8.00-9.00 sec 109 MBytes 913 Mbits/sec 299 141 KBytes [ 5] 9.00-10.00 sec 110 MBytes 922 Mbits/sec 287 146 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.08 GBytes 926 Mbits/sec 3032 sender [ 5] 0.00-10.00 sec 1.08 GBytes 925 Mbits/sec receiver Fixes: de274be3 ("net: dsa: felix: set TX flow control according to the phylink_mac_link_up resolution") Reported-by:
Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kevin Bracey authored
commit fb80445c upstream. commit 56b765b7 ("htb: improved accuracy at high rates") broke "overhead X", "linklayer atm" and "mpu X" attributes. "overhead X" and "linklayer atm" have already been fixed. This restores the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping: tc class add ... htb rate X overhead 4 mpu 64 The code being fixed is used by htb, tbf and act_police. Cake has its own mpu handling. qdisc_calculate_pkt_len still uses the size table containing values adjusted for mpu by user space. iproute2 tc has always passed mpu into the kernel via a tc_ratespec structure, but the kernel never directly acted on it, merely stored it so that it could be read back by `tc class show`. Rather, tc would generate length-to-time tables that included the mpu (and linklayer) in their construction, and the kernel used those tables. Since v3.7, the tables were no longer used. Along with "mpu", this also broke "overhead" and "linklayer" which were fixed in 01cb71d2 ("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84 ("net_sched: restore "linklayer atm" handling", v3.11). "overhead" was fixed by simply restoring use of tc_ratespec::overhead - this had originally been used by the kernel but was initially omitted from the new non-table-based calculations. "linklayer" had been handled in the table like "mpu", but the mode was not originally passed in tc_ratespec. The new implementation was made to handle it by getting new versions of tc to pass the mode in an extended tc_ratespec, and for older versions of tc the table contents were analysed at load time to deduce linklayer. As "mpu" has always been given to the kernel in tc_ratespec, accompanying the mpu-based table, we can restore system functionality with no userspace change by making the kernel act on the tc_ratespec value. Fixes: 56b765b7 ("htb: improved accuracy at high rates") Signed-off-by:
Kevin Bracey <kevin@bracey.fi> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Vimalkumar <j.vimal@gmail.com> Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Elder authored
commit 6c0e3b5c upstream. In ipa_endpoint_replenish(), if an error occurs when attempting to replenish a receive buffer, we just quit and try again later. In that case we increment the backlog count to reflect that the attempt was unsuccessful. Then, if the add_one flag was true we increment the backlog again. This second increment is not included in the backlog local variable though, and its value determines whether delayed work should be scheduled. This is a bug. Fix this by determining whether 1 or 2 should be added to the backlog before adding it in a atomic_add_return() call. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Fixes: 84f9bd12 ("soc: qcom: ipa: IPA endpoints") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jie Wang authored
commit 4e5bd03a upstream. In Linux bonding scenario, one packet is copied to several copies and sent by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit function bond_xmit_broadcast() only ueses the last slave device's tx result as the final result. In this case, if the last slave device is down, then it always return NET_XMIT_DROP, even though the other slave devices xmit success. It may cause the tx statistics error, and cause the application (e.g. scp) consider the network is unreachable. For example, use the following command to configure server A. echo 3 > /sys/class/net/bond0/bonding/mode ifconfig bond0 up ifenslave bond0 eth0 eth1 ifconfig bond0 192.168.1.125 ifconfig eth0 up ifconfig eth1 down The slave device eth0 and eth1 are connected to server B(192.168.1.107). Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information is displayed. PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data. 64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms 64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms 64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms 192.168.1.107 ping statistics 0 packets transmitted, 3 received Actually, the slave device eth0 of the bond successfully sends three ICMP packets, but the result shows that 0 packets are transmitted. Also if we use scp command to get remote files, the command end with the following printings. ssh_exchange_identification: read: Connection timed out So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS if one slave device in the bond sends packets successfully. If all slave devices send packets fail, the discarded packets stats is increased. The skb is released when there is no slave device in the bond or the last slave device is down. Fixes: ae46f184 ("bonding: propagate transmit status") Signed-off-by:
Jie Wang <wangjie125@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miroslav Lichvar authored
commit 2a4d75bf upstream. Don't forget to release the device in sock_timestamping_bind_phc() after it was used to get the vclock indices. Fixes: d463126e ("net: sock: extend SO_TIMESTAMPING for PHC binding") Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Heidelberg authored
commit c41910f2 upstream. These properties aren't documented nor implemented in the driver. Drop them. Fixes warnings as: $ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml ... arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml ... Fixes: 69cc3114 ("arm64: dts: Add Adreno GPU definitions") Signed-off-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Leon Romanovsky authored
commit e9538f82 upstream. DEVLINK_CMD_HEALTH_REPORTER_DUMP_GET command doesn't have .doit callback and has no use in internal_flags at all. Remove this misleading assignment. Fixes: e44ef4e4 ("devlink: Hang reporter's dump method on a dumpit cb") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Rogers authored
commit d3e2bb43 upstream. Multiple events may have a metric_leader to aggregate into. This happens for uncore events where, for example, uncore_imc is expanded into uncore_imc_0, uncore_imc_1, etc. Such events all have the same metric_id and should aggregate into the first event. The change introducing metric_ids had a bug where the metric_id was compared to itself, creating an always true condition. Correct this by comparing the event in the metric_evlist and the metric_leader. Fixes: ec5c5b3d ("perf metric: Encode and use metric-id as qualifier") Signed-off-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220115062852.1959424-1-irogers@google.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zechuan Chen authored
commit 4624f199 upstream. Because of commit bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf command eliminates the need to use the prefix "." at the symbol name. But when the command "perf probe -a schedule" is executed on ppc64 ABIv1, it obtains two symbol address information through /proc/kallsyms, for example: cat /proc/kallsyms | grep -w schedule c000000000657020 T .schedule c000000000d4fdb8 D schedule The symbol "D schedule" is not a function symbol, and perf will print: "p:probe/schedule _text+13958584"Failed to write event: Invalid argument Therefore, when searching symbols from map and adding probe point for them, a symbol type check is added. If the type of symbol is not a function, skip it. Fixes: bf794bf5 ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2") Signed-off-by:
Zechuan Chen <chenzechuan1@huawei.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jianlin Lv <Jianlin.Lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Rogers authored
commit 0046686d upstream. Uncore events as group leaders fail in per-thread mode causing exit errors. Enable system-wide for metricgroup testing. This fixes the HPC metric group when tested on skylakex. Fixes: 4a87dea9 ("perf test: Workload test of metric and metricgroups") Signed-off-by:
Ian Rogers <irogers@google.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211223183948.3423989-1-irogers@google.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
José Expósito authored
commit e000ea0b upstream. We shouldn't free() something that will be used in the next line, fix it. Fixes: b85a4d61 ("perf metric: Allow modifiers on metrics") Addresses-Coverity-ID: 1494000 Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211208171113.22089-1-jose.exposito89@gmail.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-