- Jun 07, 2021
-
-
Robert Nelson authored
5.10.35-ti-rt-r7 bb.org_defconfig 5.10 TI Delta: https://github.com/RobertCNelson/ti-linux-kernel/compare/aff37a0ce2ca958599fcc7303a68e357f1f2c796...ae876c7c91df646ab198331e676f250f06cfdeb5 AUFS: https://github.com/sfjro/aufs5-standalone/commit/304f28d3c932b1b999393b04dcf380180418e409 BBDTBS: https://github.com/beagleboard/BeagleBoard-DeviceTrees/commit/deb2f3329fa7f14333fabd36ad043dc76abfe5d3 RT: patch-5.10.35-rt39.patch.xz TI_AMX3_CM3: http://git.ti.com/gitweb/?p=processor-firmware/ti-amx3-cm3-pm-firmware.git;a=commit;h=fb484c5e54f2e31cf0a338d2927a06a2870bcc2c WPANUSB: https://github.com/statropy/wpanusb/commit/251f0167545bf2dcaa3cad991a59dbf5ab05490a WIRELESS_REGDB: https://git.kernel.org/pub/scm/linux/kernel/git/sforshee/wireless-regdb.git/commit/?id=04f3e5411b1cdc59292775e7b8e05a5d35ea4a80 Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
-
http://gfnd.rcn-ee.org:8080Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
already default on BBB/X15, just calcuated everybootup Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Thomas Petazzoni authored
In commit 92af4fc6 ("usb: musb: Fix suspend with devices connected for a64"), the logic to support the MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally schedule the musb->irq_work delayed work. This commit badly breaks ECM Gadget on AM335X. Indeed, with this commit, one can observe massive packet loss: $ ping 192.168.0.100 ... 15 packets transmitted, 3 received, 80% packet loss, time 14316ms Reverting this commit brings back a properly functioning ECM Gadget. An analysis of the commit seems to indicate that a mistake was made: the previous code was not falling through into the MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is taken. Changing the logic to be as it was before the problematic commit *and* only conditionally scheduling musb->irq_work resolves the regression: $ ping 192.168.0.100 ... 64 packets transmitted, 64 received, 0% packet loss, time 64475ms Fixes: 92af4fc6 ("usb: musb: Fix suspend with devices connected for a64") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: stable@vger.kernel.org
-
Jason Kridner authoredOriginal Commit : https://github.com/beagleboard/linux/commit/8884f22a6b3a5217177c2f843e5c83d613bc6676 Signed-off-by:
Jason Kridner <jkridner@beagleboard.org>
-
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
hack: gpiolib: yes we have drivers stomping on each other, we need to find a better way to share gpio... Signed-off-by: -
Robert Nelson authored
Authors: Pantelis Antoniou <panto@antoniou-consulting.com> Charles Steinkuehler <charles@steinkuehler.net> Jason Kridner <jdk@ti.com> Robert Nelson <robertcnelson@gmail.com> Tobias Müller <Tobias_Mueller@twam.info> Matthijs van Duin <matthijsvanduin@gmail.com> This patch was derived from 19 commits: https://github.com/RobertCNelson/linux-dev/tree/35e301ae8436e9f56f65bf1a7440021eda42f948/patches/drivers/ti/gpio Signed-off-by:
-
frost authored
-
bigguiness@gmail.com authored
------=_Part_422_1349561576.1515022447432 Content-Type: text/plain; charset="UTF-8" Hello all, The TI touch screen driver does not work _right_ with the libts-bin package in the jessie image. $ cat /etc/dogtag BeagleBoard.org Debian Image 2018-01-01 $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.10 (jessie) Release: 8.10 Codename: jessie $ dpkg -l | grep libts-bin ii libts-bin 1.14-1rcnee0~jessie+20171122 armhf touch screen library utilities $ sudo ts_calibrate ts_setup: No such file or directory It is possible to make it work by setting the TSLIB_TSDEVICE environment variable: $ sudo su # export TSLIB_TSDEVICE=/dev/input/event2 # ts_calibrate But, that's a bit of a pain since the environment variable always needs to be set in order to use the touchscreen. It appears that this version of the utilities uses the INPUT_PROP_DIRECT propbit to automatically detect which /dev/input/event device is the touchscreen. It looks like the following is the only change needed to make it work. Unfortunately, I don't have currently have a way to build a custom kernel for the BeagleBone in order to test it. If there is anyone that could I would appreciate it. Regards, Hartley -
Robert Nelson authored
This reverts commit 3c9dc275 . Signed-off-by:
-
Robert Nelson authored
Signed-off-by: -
Will Eccles authored
When CONFIG_PM is not enabled, the function davinci_mdio_update_dt_from_phymask is not defined. This patch fixes this so that the build does not fail with CONFIG_PM disabled. Signed-off-by:Will Eccles <will@eccles.dev>
-
Jay at Control Module Industries authored
I have encountered the same issue(s) on A6A boards. I couldn't find a patch, so I wrote this patch to update the device tree in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I would welcome any input on a different approach. https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ v4.1-rcX: added hack around CONFIG_OF_OVERLAY v4.2-rc3+: added if (of_machine_is_compatible("ti,am335x-bone")) so we do not break dual ethernet am335x devices Signed-off-by:
-
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
This reverts commit 956b200a . Signed-off-by:
-
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Reference: v5.10.42 Signed-off-by: -
Robert Nelson authored
Reference: v5.13-rc5 Signed-off-by: -
Robert Nelson authored
Reference: v5.12.9 Signed-off-by: -
Robert Nelson authored
Reference: v5.12.9 Signed-off-by: -
-
-
-
Robert Nelson authored
patch-5.10.35-rt39.patch.xz Signed-off-by: -
Jason Kridner authored
From https://github.com/statropy/wpanusb
-
-
-
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by:
-
- Jun 06, 2021
-
-
LCPD Auto Merger authored
TI-Feature: connectivity TI-Branch: connectivity-ti-linux-5.10.y * 'connectivity-ti-linux-5.10.y' of ssh://bitbucket.itg.ti.com/lcpdpublicdom/connectivity : arm64: dts: ti: k3-am642-evm: Add ecap0 node arm64: dts: ti: k3-am642-sk: Add ecap0 node arm64: dts: ti: k3-am64-main: Add ecap pwm nodes dt-bindings: pwm: pwm-tiecap: Add compatible string for AM64 SoC dt-bindings: pwm: pwm-tiecap: Convert to json schema ARM: dts: am33xx: Drop interrupt property from ecap nodes ARM: dts: ti: Fix node name for all ecap dt nodes ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes arm64: dts: ti: Add overlay for OLDI-LCD1EVM Display and touch screen arm64: dts: Add new DT overlay k3-am654-evm-tc358876.dts arm64: dts: ti: k3-am65-main: fix DSS irq trigger type Signed-off-by:
LCPD Auto Merger <lcpd_integration@list.ti.com>
-
- Jun 04, 2021
-
-
ecap0 can be configured to use pad ECAP0_IN_APWM_OUT (D18) which has a signal connected to Pin 1 of J12 on EVM. Add support for adding this pinmux so that pwm can be observed on pin 1 of Header J12 Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com>
-
ecap0 can be configured to use pad ECAP0_IN_APWM_OUT (D18) which has a signal connected to Pin 1 of J3. Add support for adding this pinmux so that pwm can be observed on pin 1 of Header J3 Signed-off-by:
-
