- Dec 14, 2018
-
-
Robert Nelson authored
-
http://rcn-ee.online:8080Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Eyal Reizer authored
Add support for the WL1835MOD cape. This cape conflicts with the eMMC and HDMI on board the BeagleBone Black. This change requires that the board be booted from the SD card slot by holding the user/boot button down at power on and reset. Signed-off-by:
Eyal Reizer <eyalr@ti.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
vinifr authored
Add a dts file for Olimex AM3352-SOM board. The board does not use the PMIC tps65217 and does not have many peripherals present in beaglebone. Thus, a specific dtsi file (am335x-som-common.dtsi) is needed. rcn-ee: drop ti,am335x-bone due to: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffc] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffc] #4.5.0-rc0 Use: olimex,am335x-olimex-som tps65217.dtsi gone Signed-off-by:
Dimitar Gamishev <hehopmajieh@debian.bg> Signed-off-by:
Vinicius Maciel <viniciusfre@gmail.com>
-
Matt Porter authored
Adds a dts file for the Arrow BeagleBone Black Industrial board. This BBB variant differs in that it uses an industrial temp rated ADV7511W HDMI encoder rather than the NXP HDMI encoder on the tradtional BBB. Signed-off-by:
Matt Porter <mporter@konsulko.com> Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Schuyler Patton authored
Added pin mux definitions for collision and carrier sense errors coming from the ethernet phy. Without these two signals the MAC ends up ignoring the errors detected by the PHY which end up causing a lower throughput problem when the phy is in half duplex mode such as connected through a hub. Fixes: 2ba35493 (ARM: dts: am335x-bone*: add DT for BeagleBone Black) Cc: Koen Kooi <koen@dominion.thruhere.net> Cc: Tom Rini <trini@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Schuyler Patton <spatton@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Robert Nelson authored
https://groups.google.com/d/msg/beagleboard/634Xm1m3XA8/B028x1FzAyAJ Reported-by:
Mark A. Yoder <mark.a.yoder@gmail.com> Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Stefan Agner authored
This adds the devicetree bindings for the STMPE ADC. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com>
-
Stefan Agner authored
This adds an ADC driver for the STMPE device using the industrial input/output interface. The driver supports raw reading of values. The driver depends on the MFD STMPE driver. If the touchscreen block is enabled too, only four of the 8 ADC channels are available. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com>
-
Philippe Schenker authored
Move defines that are ADC related to the header of the overlying mfd, so they can be used from multiple sub-devices. Signed-off-by:
Philippe Schenker <philippe.schenker@toradex.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Jason Kridner authored
-
Robert Nelson authored
Authors: Pantelis Antoniou <panto@antoniou-consulting.com> Charles Steinkuehler <charles@steinkuehler.net> Jason Kridner <jdk@ti.com> Robert Nelson <robertcnelson@gmail.com> Tobias Müller <Tobias_Mueller@twam.info> Matthijs van Duin <matthijsvanduin@gmail.com> This patch was derived from 19 commits: https://github.com/RobertCNelson/linux-dev/tree/35e301ae8436e9f56f65bf1a7440021eda42f948/patches/drivers/ti/gpio Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
frost authored
-
bigguiness@gmail.com authored
------=_Part_422_1349561576.1515022447432 Content-Type: text/plain; charset="UTF-8" Hello all, The TI touch screen driver does not work _right_ with the libts-bin package in the jessie image. $ cat /etc/dogtag BeagleBoard.org Debian Image 2018-01-01 $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.10 (jessie) Release: 8.10 Codename: jessie $ dpkg -l | grep libts-bin ii libts-bin 1.14-1rcnee0~jessie+20171122 armhf touch screen library utilities $ sudo ts_calibrate ts_setup: No such file or directory It is possible to make it work by setting the TSLIB_TSDEVICE environment variable: $ sudo su # export TSLIB_TSDEVICE=/dev/input/event2 # ts_calibrate But, that's a bit of a pain since the environment variable always needs to be set in order to use the touchscreen. It appears that this version of the utilities uses the INPUT_PROP_DIRECT propbit to automatically detect which /dev/input/event device is the touchscreen. It looks like the following is the only change needed to make it work. Unfortunately, I don't have currently have a way to build a custom kernel for the BeagleBone in order to test it. If there is anyone that could I would appreciate it. Regards, Hartley
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Drew Fustini authored
Call pm_runtime_get_sync() at the beginning of any functions that will read or write to the memory mapped eQEP registers. This is to ensure that the eQEP peripheral is running and its clock is enabled. Before this patch, an attempt to read the position file via sysfs would results in a segmentation fault. The kernel log would be contain this error: [ 2591.653471] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa304180 [ 2591.915165] [<bf005310>] (eqep_get_position [tieqep]) from [<c08930d0>] (dev_attr_show+0x2c/0x58) More details: https://gist.github.com/pdp7/fe07082d23f2bfbc362c733a7b0aea72 BeagleBoard mailing list thread: https://groups.google.com/d/msg/beagleboard/_TdTH7oPEXE/MNvU-mY6DgAJ
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Jay at Control Module Industries authored
I have encountered the same issue(s) on A6A boards. I couldn't find a patch, so I wrote this patch to update the device tree in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I would welcome any input on a different approach. https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ v4.1-rcX: added hack around CONFIG_OF_OVERLAY v4.2-rc3+: added if (of_machine_is_compatible("ti,am335x-bone")) so we do not break dual ethernet am335x devices Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>