4.9 TI Delta: https://github.com/RobertCNelson/ti-linux-kernel/compare/afc36ea62a4c6cab27c4b180b50dbb5a291ae9e3...a4e3535380274f50fc09134d7e3d4ea89beea8e5



Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Add support for the WL1835MOD cape.
This cape conflicts with the eMMC and HDMI on board the BeagleBone Black.

This change requires that the board be booted from the SD card slot by
holding the user/boot button down at power on and reset.

Signed-off-by: Eyal Reizer <eyalr@ti.com>

Rewritten using includes, v3.16.1

Signed-off-by: Dave Lambert <dave@lambsys.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Add a dts file for Olimex AM3352-SOM board. The board does not use the PMIC
tps65217 and does not have many peripherals present in beaglebone. Thus, a
specific dtsi file (am335x-som-common.dtsi) is needed.

rcn-ee:
drop ti,am335x-bone due to:
davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffc]
davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffc]
#4.5.0-rc0
Use: olimex,am335x-olimex-som
tps65217.dtsi gone

Signed-off-by: Dimitar Gamishev <hehopmajieh@debian.bg>
Signed-off-by: Vinicius Maciel <viniciusfre@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Adds a dts file for the Arrow BeagleBone Black Industrial board.
This BBB variant differs in that it uses an industrial temp rated
ADV7511W HDMI encoder rather than the NXP HDMI encoder on the
tradtional BBB.

Signed-off-by: Matt Porter <mporter@konsulko.com>

Convert the driver over the the device model component framework, making
use of the drm encoder/connector helpers. This allows adihdmi to be
dynamically selected as an external encoder for drm drivers like tilcdc
that support the DT graph binding which defines ports and remote-endpoints
to attach external encoders.

Also, this driver was modified by another developer to support audio and
tweak some settings.  Along the way it seems to have been reformatted to
4 space tabs which is hard to work with alongside the standard 8 space tabs
in the kernel coding standard. As such, this is reformatted to standard 8
space tabs so it's a bit more readable.

The component and audio support should be merged into the upstream driver
so this adihdmi driver can be removed.

Signed-off-by: Matt Porter <mporter@konsulko.com>

Hacked driver that has audio support. Use this temporarily until
audio support can be added to the upstream adv7511 driver.

Signed-off-by: Jason Kridner <jdk@ti.com>
[Remove slave hacks and use adv75xx compatible strings]
Signed-off-by: Matt Porter <mporter@konsulko.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Added pin mux definitions for collision and carrier sense errors coming
from the ethernet phy. Without these two signals the MAC ends up ignoring
the errors detected by the PHY which end up causing a lower throughput
problem when the phy is in half duplex mode such as connected through a hub.

Fixes: 2ba35493 (ARM: dts: am335x-bone*: add DT for BeagleBone Black)
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Tom Rini <trini@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

https://groups.google.com/d/msg/beagleboard/634Xm1m3XA8/B028x1FzAyAJ



Reported-by: Mark A. Yoder <mark.a.yoder@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Placed in drivers/misc

BeagleLogic implements a Logic Analyzer using the Programmable Real-Time
Units (PRUs) on the BeagleBone. Visit beaglelogic.net for more information.

Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>

but read-only if it cannot be changed.  Also make value read-only if
gpio is immutably input.

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>