Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Add support for the WL1835MOD cape.
This cape conflicts with the eMMC and HDMI on board the BeagleBone Black.

This change requires that the board be booted from the SD card slot by
holding the user/boot button down at power on and reset.

Signed-off-by: Eyal Reizer <eyalr@ti.com>

Add a dts file for Olimex AM3352-SOM board. The board does not use the PMIC
tps65217 and does not have many peripherals present in beaglebone. Thus, a
specific dtsi file (am335x-som-common.dtsi) is needed.

rcn-ee:
drop ti,am335x-bone due to:
davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffc]
davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffc]
#4.5.0-rc0
Use: olimex,am335x-olimex-som
tps65217.dtsi gone

Signed-off-by: Dimitar Gamishev <hehopmajieh@debian.bg>
Signed-off-by: Vinicius Maciel <viniciusfre@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Adds a dts file for the Arrow BeagleBone Black Industrial board.
This BBB variant differs in that it uses an industrial temp rated
ADV7511W HDMI encoder rather than the NXP HDMI encoder on the
tradtional BBB.

Signed-off-by: Matt Porter <mporter@konsulko.com>

Convert the driver over the the device model component framework, making
use of the drm encoder/connector helpers. This allows adihdmi to be
dynamically selected as an external encoder for drm drivers like tilcdc
that support the DT graph binding which defines ports and remote-endpoints
to attach external encoders.

Also, this driver was modified by another developer to support audio and
tweak some settings.  Along the way it seems to have been reformatted to
4 space tabs which is hard to work with alongside the standard 8 space tabs
in the kernel coding standard. As such, this is reformatted to standard 8
space tabs so it's a bit more readable.

The component and audio support should be merged into the upstream driver
so this adihdmi driver can be removed.

Signed-off-by: Matt Porter <mporter@konsulko.com>

Hacked driver that has audio support. Use this temporarily until
audio support can be added to the upstream adv7511 driver.

Signed-off-by: Jason Kridner <jdk@ti.com>
[Remove slave hacks and use adv75xx compatible strings]
Signed-off-by: Matt Porter <mporter@konsulko.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Added pin mux definitions for collision and carrier sense errors coming
from the ethernet phy. Without these two signals the MAC ends up ignoring
the errors detected by the PHY which end up causing a lower throughput
problem when the phy is in half duplex mode such as connected through a hub.

Fixes: 2ba35493

 (ARM: dts: am335x-bone*: add DT for BeagleBone Black)
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Tom Rini <trini@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

https://groups.google.com/d/msg/beagleboard/634Xm1m3XA8/B028x1FzAyAJ



Reported-by: Mark A. Yoder <mark.a.yoder@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Authors:
Pantelis Antoniou <panto@antoniou-consulting.com>
Charles Steinkuehler <charles@steinkuehler.net>
Jason Kridner <jdk@ti.com>
Robert Nelson <robertcnelson@gmail.com>
Tobias Müller <Tobias_Mueller@twam.info>
Matthijs van Duin <matthijsvanduin@gmail.com>

This patch was derived from 19 commits:
https://github.com/RobertCNelson/linux-dev/tree/35e301ae8436e9f56f65bf1a7440021eda42f948/patches/drivers/ti/gpio



Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>

Call pm_runtime_get_sync() at the beginning of any functions that will
read or write to the memory mapped eQEP registers.  This is to ensure
that the eQEP peripheral is running and its clock is enabled.

Before this patch, an attempt to read the position file via sysfs would
results in a segmentation fault.  The kernel log would be contain this
error:

[ 2591.653471] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa304180
[ 2591.915165] [<bf005310>] (eqep_get_position [tieqep]) from [<c08930d0>] (dev_attr_show+0x2c/0x58)

More details:
https://gist.github.com/pdp7/fe07082d23f2bfbc362c733a7b0aea72

BeagleBoard mailing list thread:
https://groups.google.com/d/msg/beagleboard/_TdTH7oPEXE/MNvU-mY6DgAJ

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>