- Jul 07, 2021
-
-
Sasha Levin authored
Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Hulk Robot <hulkrobot@huawei.com> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mark Bloch authored
commit edc0b0bc upstream. Allow creating FDB steering rules only when in switchdev mode. The only software model where a userspace application can manipulate FDB entries is when it manages the eswitch. This is only possible in switchdev mode where we expose a single RDMA device with representors for all the vports that are connected to the eswitch. Fixes: 52438be4 ("RDMA/mlx5: Allow inserting a steering rule to the FDB") Link: https://lore.kernel.org/r/e928ae7c58d07f104716a2a8d730963d1bd01204.1623052923.git.leonro@nvidia.com Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> [sudip: manually backport to old file] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
[ Upstream commit c6414e1a ] Both of these drivers use ioport_map(), so they need to depend on HAS_IOPORT_MAP. Otherwise, they cannot be built even with COMPILE_TEST on architectures without an ioport implementation, such as ARCH=um. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Christian König authored
[ Upstream commit d3300991 ] AGP for example doesn't have a dma_address array. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210614110517.1624-1-christian.koenig@amd.com Signed-off-by:
-
ManYi Li authored
[ Upstream commit 7dd753ca ] Handle a reported media event code of 3. This indicates that the media has been removed from the drive and user intervention is required to proceed. Return DISK_EVENT_EJECT_REQUEST in that case. Link: https://lore.kernel.org/r/20210611094402.23884-1-limanyi@uniontech.com Signed-off-by:
ManYi Li <limanyi@uniontech.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 6f090192 ] commit ad723674 ("x86/efi: move common keyring handler functions to new file") leave this unused. Fixes: ad723674 ("x86/efi: move common keyring handler functions to new file") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191115130830.13320-1-yuehaibing@huawei.com Signed-off-by:
-
- Jun 30, 2021
-
-
Sasha Levin authored
Tested-by:
-
Eric Snowberg authored
[ Upstream commit 2565ca7f ] Move functionality within load_system_certificate_list to a common function, so it can be reused in the future. DH Changes: - Added inclusion of common.h to common.c (Eric [1]). Signed-off-by:
Eric Snowberg <eric.snowberg@oracle.com> Acked-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
David Howells <dhowells@redhat.com> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/EDA280F9-F72D-4181-93C7-CDBE95976FF7@oracle.com/ [1] Link: https://lore.kernel.org/r/20200930201508.35113-2-eric.snowberg@oracle.com/ Link: https://lore.kernel.org/r/20210122181054.32635-3-eric.snowberg@oracle.com/ # v5 Link: https://lore.kernel.org/r/161428672825.677100.7545516389752262918.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/161433311696.902181.3599366124784670368.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161529605850.163428.7786675680201528556.stgit@warthog.procyon.org.uk/ # v3 Signed-off-by:
-
Eric Snowberg authored
[ Upstream commit 56c58126 ] This fixes CVE-2020-26541. The Secure Boot Forbidden Signature Database, dbx, contains a list of now revoked signatures and keys previously approved to boot with UEFI Secure Boot enabled. The dbx is capable of containing any number of EFI_CERT_X509_SHA256_GUID, EFI_CERT_SHA256_GUID, and EFI_CERT_X509_GUID entries. Currently when EFI_CERT_X509_GUID are contained in the dbx, the entries are skipped. Add support for EFI_CERT_X509_GUID dbx entries. When a EFI_CERT_X509_GUID is found, it is added as an asymmetrical key to the .blacklist keyring. Anytime the .platform keyring is used, the keys in the .blacklist keyring are referenced, if a matching key is found, the key will be rejected. [DH: Made the following changes: - Added to have a config option to enable the facility. This allows a Kconfig solution to make sure that pkcs7_validate_trust() is enabled.[1][2] - Moved the functions out from the middle of the blacklist functions. - Added kerneldoc comments.] Signed-off-by:
-
Nayna Jain authored
[ Upstream commit ad723674 ] The handlers to add the keys to the .platform keyring and blacklisted hashes to the .blacklist keyring is common for both the uefi and powerpc mechanisms of loading the keys/hashes from the firmware. This patch moves the common code from load_uefi.c to keyring_handler.c Signed-off-by:
Nayna Jain <nayna@linux.ibm.com> Acked-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
Eric Richter <erichte@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1573441836-3632-4-git-send-email-nayna@linux.ibm.com Signed-off-by:
-
Nayna Jain authored
[ Upstream commit 2434f7d2 ] The -EKEYREJECTED error returned by existing is_hash_blacklisted() is misleading when called for checking against blacklisted hash of a binary. This patch adds a wrapper function is_binary_blacklisted() to return -EPERM error if binary is blacklisted. Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit fe19bd3d ] If more than one futex is placed on a shmem huge page, it can happen that waking the second wakes the first instead, and leaves the second waiting: the key's shared.pgoff is wrong. When 3.11 commit 13d60f4b ("futex: Take hugepages into account when generating futex_key"), the only shared huge pages came from hugetlbfs, and the code added to deal with its exceptional page->index was put into hugetlb source. Then that was missed when 4.8 added shmem huge pages. page_to_pgoff() is what others use for this nowadays: except that, as currently written, it gives the right answer on hugetlbfs head, but nonsense on hugetlbfs tails. Fix that by calling hugetlbfs-specific hugetlb_basepage_index() on PageHuge tails as well as on head. Yes, it's unconventional to declare hugetlb_basepage_index() there in pagemap.h, rather than in hugetlb.h; but I do not expect anything but page_to_pgoff() ever to need it. [akpm@linux-foundation.org: give hugetlb_basepage_index() prototype the correct scope] Link: https://lkml.kernel.org/r/b17d946b-d09-326e-b42a-52884c36df32@google.com Fixes: 800d8c63 ("shmem: add huge pages support") Reported-by:
Neel Natu <neelnatu@google.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Zhang Yi <wetpzy@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Note on stable backport: leave redundant #include <linux/hugetlb.h> in kernel/futex.c, to avoid conflict over the header files included. Signed-off-by:
-
Hugh Dickins authored
Aha! Shouldn't that quick scan over pte_none()s make sure that it holds ptlock in the PVMW_SYNC case? That too might have been responsible for BUGs or WARNs in split_huge_page_to_list() or its unmap_page(), though I've never seen any. Link: https://lkml.kernel.org/r/1bdf384c-8137-a149-2a1e-475a4791c3c@google.com Link: https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/ Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by:
Wang Yugui <wangyugui@e16-tech.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). Crash dumps showed two tail pages of a shmem huge page remained mapped by pte: ptes in a non-huge-aligned vma of a gVisor process, at the end of a long unmapped range; and no page table had yet been allocated for the head of the huge page to be mapped into. Although designed to handle these odd misaligned huge-page-mapped-by-pte cases, page_vma_mapped_walk() falls short by returning false prematurely when !pmd_present or !pud_present or !p4d_present or !pgd_present: there are cases when a huge page may span the boundary, with ptes present in the next. Restructure page_vma_mapped_walk() as a loop to continue in these cases, while keeping its layout much as before. Add a step_forward() helper to advance pvmw->address across those boundaries: originally I tried to use mm's standard p?d_addr_end() macros, but hit the same crash 512 times less often: because of the way redundant levels are folded together, but folded differently in different configurations, it was just too difficult to use them correctly; and step_forward() is simpler anyway. Link: https://lkml.kernel.org/r/fedb8632-1798-de42-f39e-873551d5bc81@google.com Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()") Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: get THP's vma_address_end() at the start, rather than later at next_pte. It's a little unnecessary overhead on the first call, but makes for a simpler loop in the following commit. Link: https://lkml.kernel.org/r/4542b34d-862f-7cb4-bb22-e0df6ce830a2@google.com Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: add a label this_pte, matching next_pte, and use "goto this_pte", in place of the "while (1)" loop at the end. Link: https://lkml.kernel.org/r/a52b234a-851-3616-2525-f42736e8934@google.com Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: add a level of indentation to much of the body, making no functional change in this commit, but reducing the later diff when this is all converted to a loop. [hughd@google.com: : page_vma_mapped_walk(): add a level of indentation fix] Link: https://lkml.kernel.org/r/7f817555-3ce1-c785-e438-87d8efdcaf26@google.com Link: https://lkml.kernel.org/r/efde211-f3e2-fe54-977-ef481419e7f3@google.com Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: adjust the test for crossing page table boundary - I believe pvmw->address is always page-aligned, but nothing else here assumed that; and remember to reset pvmw->pte to NULL after unmapping the page table, though I never saw any bug from that. Link: https://lkml.kernel.org/r/799b3f9c-2a9e-dfef-5d89-26e9f76fd97@google.com Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: rearrange the !pmd_present() block to follow the same "return not_found, return not_found, return true" pattern as the block above it (note: returning not_found there is never premature, since existence or prior existence of huge pmd guarantees good alignment). Link: https://lkml.kernel.org/r/378c8650-1488-2edf-9647-32a53cf2e21@google.com Signed-off-by:
Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: re-evaluate pmde after taking lock, then use it in subsequent tests, instead of repeatedly dereferencing pointer. Link: https://lkml.kernel.org/r/53fbc9d-891e-46b2-cb4b-468c3b19238e@google.com Signed-off-by:
-
Hugh Dickins authored
page_vma_mapped_walk() cleanup: get the hugetlbfs PageHuge case out of the way at the start, so no need to worry about it later. Link: https://lkml.kernel.org/r/e31a483c-6d73-a6bb-26c5-43c3b880a2@google.com Signed-off-by:
-
Hugh Dickins authored
Patch series "mm: page_vma_mapped_walk() cleanup and THP fixes". I've marked all of these for stable: many are merely cleanups, but I think they are much better before the main fix than after. This patch (of 11): page_vma_mapped_walk() cleanup: sometimes the local copy of pvwm->page was used, sometimes pvmw->page itself: use the local copy "page" throughout. Link: https://lkml.kernel.org/r/589b358c-febc-c88e-d4c2-7834b37fa7bf@google.com Link: https://lkml.kernel.org/r/88e67645-f467-c279-bf5e-af4b5c6b13eb@google.com Signed-off-by:
Alistair Popple <apopple@nvidia.com> Acked-by:
-
Yang Shi authored
[ Upstream commit 504e070d ] When debugging the bug reported by Wang Yugui [1], try_to_unmap() may fail, but the first VM_BUG_ON_PAGE() just checks page_mapcount() however it may miss the failure when head page is unmapped but other subpage is mapped. Then the second DEBUG_VM BUG() that check total mapcount would catch it. This may incur some confusion. As this is not a fatal issue, so consolidate the two DEBUG_VM checks into one VM_WARN_ON_ONCE_PAGE(). [1] https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/ Link: https://lkml.kernel.org/r/d0f0db68-98b8-ebfb-16dc-f29df24cf012@google.com Signed-off-by:
Yang Shi <shy828301@gmail.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Acked-by:
-
Hugh Dickins authored
[ Upstream commit 22061a1f ] There is a race between THP unmapping and truncation, when truncate sees pmd_none() and skips the entry, after munmap's zap_huge_pmd() cleared it, but before its page_remove_rmap() gets to decrement compound_mapcount: generating false "BUG: Bad page cache" reports that the page is still mapped when deleted. This commit fixes that, but not in the way I hoped. The first attempt used try_to_unmap(page, TTU_SYNC|TTU_IGNORE_MLOCK) instead of unmap_mapping_range() in truncate_cleanup_page(): it has often been an annoyance that we usually call unmap_mapping_range() with no pages locked, but there apply it to a single locked page. try_to_unmap() looks more suitable for a single locked page. However, try_to_unmap_one() contains a VM_BUG_ON_PAGE(!pvmw.pte,page): it is used to insert THP migration entries, but not used to unmap THPs. Copy zap_huge_pmd() and add THP handling now? Perhaps, but their TLB needs are different, I'm too ignorant of the DAX cases, and couldn't decide how far to go for anon+swap. Set that aside. The second attempt took a different tack: make no change in truncate.c, but modify zap_huge_pmd() to insert an invalidated huge pmd instead of clearing it initially, then pmd_clear() between page_remove_rmap() and unlocking at the end. Nice. But powerpc blows that approach out of the water, with its serialize_against_pte_lookup(), and interesting pgtable usage. It would need serious help to get working on powerpc (with a minor optimization issue on s390 too). Set that aside. Just add an "if (page_mapped(page)) synchronize_rcu();" or other such delay, after unmapping in truncate_cleanup_page()? Perhaps, but though that's likely to reduce or eliminate the number of incidents, it would give less assurance of whether we had identified the problem correctly. This successful iteration introduces "unmap_mapping_page(page)" instead of try_to_unmap(), and goes the usual unmap_mapping_range_tree() route, with an addition to details. Then zap_pmd_range() watches for this case, and does spin_unlock(pmd_lock) if so - just like page_vma_mapped_walk() now does in the PVMW_SYNC case. Not pretty, but safe. Note that unmap_mapping_page() is doing a VM_BUG_ON(!PageLocked) to assert its interface; but currently that's only used to make sure that page->mapping is stable, and zap_pmd_range() doesn't care if the page is locked or not. Along these lines, in invalidate_inode_pages2_range() move the initial unmap_mapping_range() out from under page lock, before then calling unmap_mapping_page() under page lock if still mapped. Link: https://lkml.kernel.org/r/a2a4a148-cdd8-942c-4ef8-51b77f643dbe@google.com Fixes: fc127da0 ("truncate: handle file thp") Signed-off-by:
-
Jue Wang authored
commit 31657170 upstream. Anon THP tails were already supported, but memory-failure may need to use page_address_in_vma() on file THP tails, which its page->mapping check did not permit: fix it. hughd adds: no current usage is known to hit the issue, but this does fix a subtle trap in a general helper: best fixed in stable sooner than later. Link: https://lkml.kernel.org/r/a0d9b53-bf5d-8bab-ac5-759dc61819c1@google.com Fixes: 800d8c63 ("shmem: add huge pages support") Signed-off-by:
Jue Wang <juew@google.com> Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit 494334e4 ] Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit 4b0ece6f ("mm: migrate: fix remove_migration_pte() for ksm pages") once discovered. I dithered over the best thing to do about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both vma_address() and vma_address_end(); though the only place in danger of using it on them was try_to_unmap_one(). Sidenote: vma_address() and vma_address_end() now use compound_nr() on a head page, instead of thp_size(): to make the right calculation on a hugetlbfs page, whether or not THPs are configured. try_to_unmap() is used on hugetlbfs pages, but perhaps the wrong calculation never mattered. Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com Fixes: a8fa41ad ("mm, rmap: check all VMAs that PTE-mapped THP can be part of") Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit 732ed558 ] Stressing huge tmpfs often crashed on unmap_page()'s VM_BUG_ON_PAGE (!unmap_success): with dump_page() showing mapcount:1, but then its raw struct page output showing _mapcount ffffffff i.e. mapcount 0. And even if that particular VM_BUG_ON_PAGE(!unmap_success) is removed, it is immediately followed by a VM_BUG_ON_PAGE(compound_mapcount(head)), and further down an IS_ENABLED(CONFIG_DEBUG_VM) total_mapcount BUG(): all indicative of some mapcount difficulty in development here perhaps. But the !CONFIG_DEBUG_VM path handles the failures correctly and silently. I believe the problem is that once a racing unmap has cleared pte or pmd, try_to_unmap_one() may skip taking the page table lock, and emerge from try_to_unmap() before the racing task has reached decrementing mapcount. Instead of abandoning the unsafe VM_BUG_ON_PAGE(), and the ones that follow, use PVMW_SYNC in try_to_unmap_one() in this case: adding TTU_SYNC to the options, and passing that from unmap_page(). When CONFIG_DEBUG_VM, or for non-debug too? Consensus is to do the same for both: the slight overhead added should rarely matter, except perhaps if splitting sparsely-populated multiply-mapped shmem. Once confident that bugs are fixed, TTU_SYNC here can be removed, and the race tolerated. Link: https://lkml.kernel.org/r/c1e95853-8bcd-d8fd-55fa-e7f2488e78f@google.com Fixes: fec89c10 ("thp: rewrite freeze_page()/unfreeze_page() with generic rmap walkers") Signed-off-by:
-
Hugh Dickins authored
commit 3b77e8c8 upstream. Most callers of is_huge_zero_pmd() supply a pmd already verified present; but a few (notably zap_huge_pmd()) do not - it might be a pmd migration entry, in which the pfn is encoded differently from a present pmd: which might pass the is_huge_zero_pmd() test (though not on x86, since L1TF forced us to protect against that); or perhaps even crash in pmd_page() applied to a swap-like entry. Make it safe by adding pmd_present() check into is_huge_zero_pmd() itself; and make it quicker by saving huge_zero_pfn, so that is_huge_zero_pmd() will not need to do that pmd_page() lookup each time. __split_huge_pmd_locked() checked pmd_trans_huge() before: that worked, but is unnecessary now that is_huge_zero_pmd() checks present. Link: https://lkml.kernel.org/r/21ea9ca-a1f5-8b90-5e88-95fb1c49bbfa@google.com Fixes: e71769ae ("mm: enable thp migration for shmem thp") Signed-off-by:
-
Hugh Dickins authored
[ Upstream commit 99fa8a48 ] Patch series "mm/thp: fix THP splitting unmap BUGs and related", v10. Here is v2 batch of long-standing THP bug fixes that I had not got around to sending before, but prompted now by Wang Yugui's report https://lore.kernel.org/linux-mm/20210412180659.B9E3.409509F4@e16-tech.com/ Wang Yugui has tested a rollup of these fixes applied to 5.10.39, and they have done no harm, but have *not* fixed that issue: something more is needed and I have no idea of what. This patch (of 7): Stressing huge tmpfs page migration racing hole punch often crashed on the VM_BUG_ON(!pmd_present) in pmdp_huge_clear_flush(), with DEBUG_VM=y kernel; or shortly afterwards, on a bad dereference in __split_huge_pmd_locked() when DEBUG_VM=n. They forgot to allow for pmd migration entries in the non-anonymous case. Full disclosure: those particular experiments were on a kernel with more relaxed mmap_lock and i_mmap_rwsem locking, and were not repeated on the vanilla kernel: it is conceivable that stricter locking happens to avoid those cases, or makes them less likely; but __split_huge_pmd_locked() already allowed for pmd migration entries when handling anonymous THPs, so this commit brings the shmem and file THP handling into line. And while there: use old_pmd rather than _pmd, as in the following blocks; and make it clearer to the eye that the !vma_is_anonymous() block is self-contained, making an early return after accounting for unmapping. Link: https://lkml.kernel.org/r/af88612-1473-2eaa-903-8d1a448b26@google.com Link: https://lkml.kernel.org/r/dd221a99-efb3-cd1d-6256-7e646af29314@google.com Fixes: e71769ae ("mm: enable thp migration for shmem thp") Signed-off-by:
-
Xu Yu authored
commit ffc90cbb upstream. We notice that hung task happens in a corner but practical scenario when CONFIG_PREEMPT_NONE is enabled, as follows. Process 0 Process 1 Process 2..Inf split_huge_page_to_list unmap_page split_huge_pmd_address __migration_entry_wait(head) __migration_entry_wait(tail) remap_page (roll back) remove_migration_ptes rmap_walk_anon cond_resched Where __migration_entry_wait(tail) is occurred in kernel space, e.g., copy_to_user in fstat, which will immediately fault again without rescheduling, and thus occupy the cpu fully. When there are too many processes performing __migration_entry_wait on tail page, remap_page will never be done after cond_resched. This makes __migration_entry_wait operate on the compound head page, thus waits for remap_page to complete, whether the THP is split successfully or roll back. Note that put_and_wait_on_page_locked helps to drop the page reference acquired with get_page_unless_zero, as soon as the page is on the wait queue, before actually waiting. So splitting the THP is only prevented for a brief interval. Link: https://lkml.kernel.org/r/b9836c1dd522e903891760af9f0c86a2cce987eb.1623144009.git.xuyu@linux.alibaba.com Fixes: ba988280 ("thp: add option to setup migration entries during PMD split") Suggested-by:
Gang Deng <gavin.dg@linux.alibaba.com> Signed-off-by:
Xu Yu <xuyu@linux.alibaba.com> Acked-by:
-
Miaohe Lin authored
[ Upstream commit b7e188ec ] page_mapcount_is_zero() calculates accurately how many mappings a hugepage has in order to check against 0 only. This is a waste of cpu time. We can do this via page_not_mapped() to save some possible atomic_read cycles. Remove the function page_mapcount_is_zero() as it's not used anymore and move page_not_mapped() above try_to_unmap() to avoid identifier undeclared compilation error. Link: https://lkml.kernel.org/r/20210130084904.35307-1-linmiaohe@huawei.com Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
[ Upstream commit e0af87ff ] Remove extra semicolon without any functional change intended. Link: https://lkml.kernel.org/r/20210127093425.39640-1-linmiaohe@huawei.com Signed-off-by:
-
Alex Shi authored
[ Upstream commit a4055888 part ] Add VM_WARN_ON_ONCE_PAGE() macro. Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.com Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
Petr Mladek authored
kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync() commit 5fa54346 upstream. The system might hang with the following backtrace: schedule+0x80/0x100 schedule_timeout+0x48/0x138 wait_for_common+0xa4/0x134 wait_for_completion+0x1c/0x2c kthread_flush_work+0x114/0x1cc kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144 kthread_cancel_delayed_work_sync+0x18/0x2c xxxx_pm_notify+0xb0/0xd8 blocking_notifier_call_chain_robust+0x80/0x194 pm_notifier_call_chain_robust+0x28/0x4c suspend_prepare+0x40/0x260 enter_state+0x80/0x3f4 pm_suspend+0x60/0xdc state_store+0x108/0x144 kobj_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec It is caused by the following race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(): CPU0 CPU1 Context: Thread A Context: Thread B kthread_mod_delayed_work() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() kthread_cancel_delayed_work_sync() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() spin_lock() work->canceling++ spin_unlock spin_lock() queue_delayed_work() // dwork is put into the worker->delayed_work_list spin_unlock() kthread_flush_work() // flush_work is put at the tail of the dwork wait_for_completion() Context: IRQ kthread_delayed_work_timer_fn() spin_lock() list_del_init(&work->node); spin_unlock() BANG: flush_work is not longer linked and will never get proceed. The problem is that kthread_mod_delayed_work() checks work->canceling flag before canceling the timer. A simple solution is to (re)check work->canceling after __kthread_cancel_work(). But then it is not clear what should be returned when __kthread_cancel_work() removed the work from the queue (list) and it can't queue it again with the new @delay. The return value might be used for reference counting. The caller has to know whether a new work has been queued or an existing one was replaced. The proper solution is that kthread_mod_delayed_work() will remove the work from the queue (list) _only_ when work->canceling is not set. The flag must be checked after the timer is stopped and the remaining operations can be done under worker->lock. Note that kthread_mod_delayed_work() could remove the timer and then bail out. It is fine. The other canceling caller needs to cancel the timer as well. The important thing is that the queue (list) manipulation is done atomically under worker->lock. Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@suse.com Fixes: 9a6b06c8 ("kthread: allow to modify delayed kthread work") Signed-off-by:
Petr Mladek <pmladek@suse.com> Reported-by:
Martin Liu <liumartin@google.com> Cc: <jenhaochen@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Petr Mladek authored
commit 34b3d534 upstream. Patch series "kthread_worker: Fix race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync()". This patchset fixes the race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync() including proper return value handling. This patch (of 2): Simple code refactoring as a preparation step for fixing a race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(). It does not modify the existing behavior. Link: https://lkml.kernel.org/r/20210610133051.15337-2-pmladek@suse.com Signed-off-by:
-
Johan Hovold authored
commit 4ca070ef upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously used the osif_usb_read() helper and set the IN direction bit. Reported-by:
<syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com> Fixes: 83e53a8f ("i2c: Add bus driver for for OSIF USB i2c device.") Cc: stable@vger.kernel.org # 3.14 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Nicholas Piggin authored
commit f8be156b upstream. It's possible to create a region which maps valid but non-refcounted pages (e.g., tail pages of non-compound higher order allocations). These host pages can then be returned by gfn_to_page, gfn_to_pfn, etc., family of APIs, which take a reference to the page, which takes it from 0 to 1. When the reference is dropped, this will free the page incorrectly. Fix this by only taking a reference on valid pages if it was non-zero, which indicates it is participating in normal refcounting (and can be released with put_page). This addresses CVE-2021-22543. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Skripkin authored
[ Upstream commit 8fd0c1b0 ] My local syzbot instance hit memory leak in nilfs2. The problem was in missing kobject_put() in nilfs_sysfs_delete_device_group(). kobject_del() does not call kobject_cleanup() for passed kobject and it leads to leaking duped kobject name if kobject_put() was not called. Fail log: BUG: memory leak unreferenced object 0xffff8880596171e0 (size 8): comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s) hex dump (first 8 bytes): 6c 6f 6f 70 30 00 00 00 loop0... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x53/0x80 mm/util.c:83 kvasprintf_const+0x108/0x190 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x160 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999 init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637 Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com Fixes: da7141fb ("nilfs2: add /sys/fs/nilfs2/<device> group") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by:
-
Fabien Dessenne authored
[ Upstream commit 67e2996f ] Each GPIO bank supports a variable number of lines which is usually 16, but is less in some cases : this is specified by the last argument of the "gpio-ranges" bank node property. Report to the framework, the actual number of lines, so the libgpiod gpioinfo command lists the actually existing GPIO lines. Fixes: 1dc9d289 ("pinctrl: stm32: add possibility to use gpio-ranges to declare bank range") Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20210617144629.2557693-1-fabien.dessenne@foss.st.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Esben Haabendal authored
[ Upstream commit f6396341 ] As documented in Documentation/networking/driver.rst, the ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances, and as recommended, we simply stop the tx queue in advance, when there is a risk that the next xmit would cause a NETDEV_TX_BUSY return. Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
