- Feb 23, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220221084934.836145070@linuxfoundation.org Tested-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by:
Ronald Warsow <rwarsow@gmx.de> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Zan Aziz <zanaziz313@gmail.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Bagas Sanjaya <bagasdotme@gmail.com> Tested-by:
Rudi Heitbaum <rudi@heitbaum.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Ron Economos <re@w6rz.net> Tested-by:
Justin M. Forbes <jforbes@fedoraproject.org> Tested-by:
Slade Watkins <slade@sladewatkins.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jing Leng authored
[ Upstream commit 1b9e740a ] When the KCONFIG_AUTOCONFIG is specified (e.g. export \ KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of include/config/ will not be created, so kconfig can't create deps files in it and auto.conf can't be generated. Signed-off-by:
Jing Leng <jleng@ambarella.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc St-Amand authored
[ Upstream commit 37f78606 ] Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width. When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess. [ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks. Signed-off-by:
Marc St-Amand <mstamand@ciena.com> Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Slark Xiao authored
[ Upstream commit 8ecbb179 ] Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by:
Slark Xiao <slark_xiao@163.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Dmytro Laktyushkin authored
[ Upstream commit 60fdf98a ] Fix clamping to match register field size Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Roman Li authored
[ Upstream commit 328e34a5 ] [Why] pflip interrupt order are mapped 1 to 1 to otg id. e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2... Linux DM registers pflip interrupts per number of crtcs. In fused pipe case crtc numbers can be less than otg id. e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2 so DM only registers irq_src 26,27. This is a bug since if pipe#2 remains unfused DM never gets otg2 pflip interrupt (irq_src=28) That may results in gfx failure due to pflip timeout. [How] Register pflip interrupts per max num of otg instead of num_crtc Signed-off-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Aaron Liu authored
[ Upstream commit a072312f ] Confirmed with hardware team, there is harvesting for gc 10.3.1. Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Mario Limonciello authored
[ Upstream commit 03ad3093 ] A number of BIOS versions have a problem with the watermarks table not being configured properly. This manifests as a very scary looking warning during resume from s0i3. This should be harmless in most cases and is well understood, so decrease the assertion to a clearer warning about the problem. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
JaeSang Yoo authored
[ Upstream commit 3203ce39 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600c ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by:
JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit c0cfbb12 ] The driver returns an error when devm_phy_optional_get() fails leaving the previously enabled clock turned on. Change order and enable the clock only after the phy has been acquired. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.hauer@pengutronix.de Signed-off-by:
-
Dan Aloni authored
[ Upstream commit a9c10b5b ] If there are failures then we must not leave the non-NULL pointers with the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries free them, resulting in an Oops. Signed-off-by:
Dan Aloni <dan.aloni@vastdata.com> Acked-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Jae Hyun Yoo authored
[ Upstream commit 301a5d3a ] Add a checking code when it gets -EPROBE_DEFER while getting a clock resource. In this case, it doesn't need to print out an error message because the probing will be re-visited. Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Reviewed-by:
Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20211104173709.222912-1-jae.hyun.yoo@intel.com Link: https://lore.kernel.org/r/20220201070118.196372-1-joel@jms.id.au ' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Zoltán Böszörményi authored
[ Upstream commit c8ea23d5 ] This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA. While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command. TRIM must be disabled for this device. Signed-off-by:
Zoltán Böszörményi <zboszor@gmail.com> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
-
Brenda Streiff authored
[ Upstream commit 8a4c5b2a ] The 'shell' built-in only returns the first 256 bytes of the command's output. In some cases, 'shell' is used to return a path; by bumping up the buffer size to 4096 this lets us capture up to PATH_MAX. The specific case where I ran into this was due to commit 1e860048 ("gcc-plugins: simplify GCC plugin-dev capability test"). After this change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return a path; if the gcc path is particularly long, then the path ends up truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS depends test always fail. Signed-off-by:
Brenda Streiff <brenda.streiff@ni.com> Signed-off-by:
-
Mario Limonciello authored
[ Upstream commit d6ebb17c ] Testing on various upcoming OEM systems shows commit 7b167c4c ("ACPI: PM: Only mark EC GPE for wakeup on Intel systems") was short sighted and the symptoms were indicative of other problems. Some OEMs do have the dedicated GPIOs for the power button but also rely upon an interrupt to the EC SCI to let the lid work. The original commit showed spurious activity on Lenovo systems: * On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and sometimes the power button event doesn't work. This was confirmed on my end at that time. However further development in the kernel showed that the issue was actually the IRQ for the GPIO controller was also shared with the EC SCI. This was actually fixed by commit 2d54067f ("pinctrl: amd: Fix wakeups when IRQ is shared with SCI"). The original commit also showed problems with AC adapter: * On HP 635 G7 detaching or attaching AC during suspend will cause the system not to wakeup * On Asus vivobook to prevent detaching AC causing resume problems * On Lenovo 14ARE05 to prevent detaching AC causing resume problems * On HP ENVY x360 to prevent detaching AC causing resume problems Detaching AC adapter causing problems appears to have been a problem because the EC SCI went off to notify the OS of the power adapter change but the SCI was ignored and there was no other way to wake up this system since GPIO controller wasn't properly enabled. The wakeups were fixed by enabling the GPIO controller in commit acd47b9f ("pinctrl: amd: Handle wake-up interrupt"). I've confirmed on a variety of OEM notebooks with the following test 1) echo 1 | sudo tee /sys/power/pm_debug_messages 2) sudo systemctl suspend 3) unplug AC adapter, make sure system is still asleep 4) wake system from lid (which is provided by ACPI SCI on some of them) 5) dmesg a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time until AC adapter plug out) b) see timekeeping for Y seconds until woke (matching ~time from AC adapter until lid event) 6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats "Time (in us) in S0i3" = X + Y - firmware processing time Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Shakeel Butt authored
[ Upstream commit 0a3f1e0b ] On an overcommitted system which is running multiple workloads of varying priorities, it is preferred to trigger an oom-killer to kill a low priority workload than to let the high priority workload receiving ENOMEMs. On our memory overcommitted systems, we are seeing a lot of ENOMEMs instead of oom-kills because io_uring_setup callchain is using __GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and allow the oom-killer to kill a lower priority job. Signed-off-by:
Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20220125051736.2981459-1-shakeelb@google.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Axel Rasmussen authored
[ Upstream commit e2aa5e65 ] These are some trivial fixups, which were needed to build the tests with clang and -Werror. The following issues are fixed: - Remove various unused variables. - In child_poll_leader_exit_test, clang isn't smart enough to realize syscall(SYS_exit, 0) won't return, so it complains we never return from a non-void function. Add an extra exit(0) to appease it. - In test_pidfd_poll_leader_exit, ret may be branched on despite being uninitialized, if we have !use_waitpid. Initialize it to zero to get the right behavior in that case. Signed-off-by:
Axel Rasmussen <axelrasmussen@google.com> Acked-by:
Christian Brauner <brauner@kernel.org> Signed-off-by:
-
Axel Rasmussen authored
[ Upstream commit 4cbd93c3 ] When running the pidfd_fdinfo_test on arm64, it fails for me. After some digging, the reason is that the child exits due to SIGBUS, because it overflows the 1024 byte stack we've reserved for it. To fix the issue, increase the stack size to 8192 bytes (this number is somewhat arbitrary, and was arrived at through experimentation -- I kept doubling until the failure no longer occurred). Also, let's make the issue easier to debug. wait_for_pid() returns an ambiguous value: it may return -1 in all of these cases: 1. waitpid() itself returned -1 2. waitpid() returned success, but we found !WIFEXITED(status). 3. The child process exited, but it did so with a -1 exit code. There's no way for the caller to tell the difference. So, at least log which occurred, so the test runner can debug things. While debugging this, I found that we had !WIFEXITED(), because the child exited due to a signal. This seems like a reasonably common case, so also print out whether or not we have WIFSIGNALED(), and the associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing clearly when it occurs. Finally, I'm suspicious of allocating the child's stack on our stack. man clone(2) suggests that the correct way to do this is with mmap(), and in particular by setting MAP_STACK. So, switch to doing it that way instead. Signed-off-by:
-
Christian Hewitt authored
[ Upstream commit f26573e2 ] The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Christian Hewitt authored
[ Upstream commit 08982a1b ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by:
-
Christian Hewitt authored
[ Upstream commit 76577c91 ] Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by:
Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by:
-
Max Kellermann authored
commit 9d2231c5 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd ("new iov_iter flavour: pipe-backed") To: Alexander Viro <viro@zeniv.linux.org.uk> To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Max Kellermann <max.kellermann@ionos.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Namjae Jeon authored
[ Upstream commit 04e26094 ] When checking smb2 query directory packets from other servers, OutputBufferLength is different with ksmbd. Other servers add an unaligned next offset to OutputBufferLength for the last entry. Signed-off-by:
Namjae Jeon <linkinjeon@kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Namjae Jeon authored
[ Upstream commit 97550c74 ] ksmbd sets the inode number to UniqueId. However, the same UniqueId for dot and dotdot entry is set to the inode number of the parent inode. This patch set them using the current inode and parent inode. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 77b33719 ] Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below. (removing this entry manually established new connection): sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED] Just skip timeout update of closed entries, we don't want them to stay around forever. Reported-and-tested-by:
Vivek Thrivikraman <vivek.thrivikraman@est.tech> Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Nick Desaulniers authored
[ Upstream commit bfb1a7c9 ] In __WARN_FLAGS(), we had two asm statements (abbreviated): asm volatile("ud2"); asm volatile(".pushsection .discard.reachable"); These pair of statements are used to trigger an exception, but then help objtool understand that for warnings, control flow will be restored immediately afterwards. The problem is that volatile is not a compiler barrier. GCC explicitly documents this: > Note that the compiler can move even volatile asm instructions > relative to other code, including across jump instructions. Also, no clobbers are specified to prevent instructions from subsequent statements from being scheduled by compiler before the second asm statement. This can lead to instructions from subsequent statements being emitted by the compiler before the second asm statement. Providing a scheduling model such as via -march= options enables the compiler to better schedule instructions with known latencies to hide latencies from data hazards compared to inline asm statements in which latencies are not estimated. If an instruction gets scheduled by the compiler between the two asm statements, then objtool will think that it is not reachable, producing a warning. To prevent instructions from being scheduled in between the two asm statements, merge them. Also remove an unnecessary unreachable() asm annotation from BUG() in favor of __builtin_unreachable(). objtool is able to track that the ud2 from BUG() terminates control flow within the function. Link: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile Link: https://github.com/ClangBuiltLinux/linux/issues/1483 Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220202205557.2260694-1-ndesaulniers@google.com Signed-off-by:
-
Guo Ren authored
[ Upstream commit 1d4df649 ] The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi). Qute opensbi patch commit-msg by Samuel: The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver. [1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31623a42ced45f38ea6 Signed-off-by:
Guo Ren <guoren@linux.alibaba.com> Cc: Anup Patel <anup@brainfault.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by:
-
Wan Jiabing authored
[ Upstream commit 46e99471 ] Fix following coccicheck warning: ./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument to && or || The efuse_rx_imp is duplicate. Here should be efuse_tx_imp. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Acked-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Padmanabha Srinivasaiah authored
[ Upstream commit 0cea730c ] In service_callback path RCU dereferenced pointer struct vchiq_service need to be accessed inside rcu read-critical section. Also userdata/user_service part of vchiq_service is accessed around different synchronization mechanism, getting an extra reference to a pointer keeps sematics simpler and avoids prolonged graceperiod. Accessing vchiq_service with rcu_read_[lock/unlock] fixes below issue. [ 32.201659] ============================= [ 32.201664] WARNING: suspicious RCU usage [ 32.201670] 5.15.11-rt24-v8+ #3 Not tainted [ 32.201680] ----------------------------- [ 32.201685] drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h:529 suspicious rcu_dereference_check() usage! [ 32.201695] [ 32.201695] other info that might help us debug this: [ 32.201695] [ 32.201700] [ 32.201700] rcu_scheduler_active = 2, debug_locks = 1 [ 32.201708] no locks held by vchiq-slot/0/98. [ 32.201715] [ 32.201715] stack backtrace: [ 32.201723] CPU: 1 PID: 98 Comm: vchiq-slot/0 Not tainted 5.15.11-rt24-v8+ #3 [ 32.201733] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 32.201739] Call trace: [ 32.201742] dump_backtrace+0x0/0x1b8 [ 32.201772] show_stack+0x20/0x30 [ 32.201784] dump_stack_lvl+0x8c/0xb8 [ 32.201799] dump_stack+0x18/0x34 [ 32.201808] lockdep_rcu_suspicious+0xe4/0xf8 [ 32.201817] service_callback+0x124/0x400 [ 32.201830] slot_handler_func+0xf60/0x1e20 [ 32.201839] kthread+0x19c/0x1a8 [ 32.201849] ret_from_fork+0x10/0x20 Tested-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Padmanabha Srinivasaiah <treasure4paddy@gmail.com> Link: https://lore.kernel.org/r/20211231195406.5479-1-treasure4paddy@gmail.com Signed-off-by:
-
Al Cooper authored
[ Upstream commit 42fed570 ] The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all). The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod. Signed-off-by:
Al Cooper <alcooperx@gmail.com> Acked-by:
-
Ye Guojin authored
[ Upstream commit 34596ba3 ] This was found by coccicheck: ./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function. Move the put_device() call before the if judgment. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ye Guojin <ye.guojin@zte.com.cn> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Wan Jiabing authored
[ Upstream commit 80c469a0 ] Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break Early exits from for_each_matching_node should decrement the node reference counter. Signed-off-by:
-
Jim Mattson authored
[ Upstream commit 710c4765 ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't mask off the high nybble when configuring a RAW perf event. Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20220203014813.2130559-2-jmattson@google.com> Reviewed-by:
David Dunn <daviddunn@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jim Mattson authored
[ Upstream commit b8bfee85 ] AMD's event select is 3 nybbles, with the high nybble in bits 35:32 of a PerfEvtSeln MSR. Don't drop the high nybble when setting up the config field of a perf_event_attr structure for a call to perf_event_create_kernel_counter(). Fixes: ca724305 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Like Xu authored
[ Upstream commit 7c174f30 ] The find_arch_event() returns a "unsigned int" value, which is used by the pmc_reprogram_counter() to program a PERF_TYPE_HARDWARE type perf_event. The returned value is actually the kernel defined generic perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler incoming parameters for better self-explanation. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-3-likexu@tencent.com> Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit 8bc69f86 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df61 ("vmbus: add per-channel sysfs info") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit ba1b71b0 ] If of_find_device_by_node() succeeds, ingenic_ecc_get() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: 15de8c6e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211230072751.21622-1-linmq006@gmail.com Signed-off-by:
-
Dongliang Mu authored
[ Upstream commit 817b8b9c ] When hid_parse() in elo_probe() fails, it forgets to call usb_put_dev to decrease the refcount. Fix this by adding usb_put_dev() in the error handling code of elo_probe(). Fixes: fbf42729 ("HID: elo: update the reference count of the usb device structure") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Cheng Jui Wang authored
commit 28df029d upstream. A kernel exception was hit when trying to dump /proc/lockdep_chains after lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!": Unable to handle kernel paging request at virtual address 00054005450e05c3 ... 00054005450e05c3] address between user and kernel address ranges ... pc : [0xffffffece769b3a8] string+0x50/0x10c lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c ... Call trace: string+0x50/0x10c vsnprintf+0x468/0x69c seq_printf+0x8c/0xd8 print_name+0x64/0xf4 lc_show+0xb8/0x128 seq_read_iter+0x3cc/0x5fc proc_reg_read_iter+0xdc/0x1d4 The cause of the problem is the function lock_chain_get_class() will shift lock_classes index by 1, but the index don't need to be shifted anymore since commit 01bb6f0a ("locking/lockdep: Change the range of class_idx in held_lock struct") already change the index to start from 0. The lock_classes[-1] located at chain_hlocks array. When printing lock_classes[-1] after the chain_hlocks entries are modified, the exception happened. The output of lockdep_chains are incorrect due to this problem too. Fixes: f611e8cf ("lockdep: Take read/write status in consideration when generate chainkey") Signed-off-by:
Cheng Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com Signed-off-by:
-
Rafał Miłecki authored
commit 834cea3a upstream. DSL and CM (Cable Modem) support 8 B max transfer size and have a custom DT binding for that reason. This driver was checking for a wrong "compatible" however which resulted in an incorrect setup. Fixes: e2e5a2c6 ("i2c: brcmstb: Adding support for CM and DSL SoCs") Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
