- Jul 02, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220630133232.926711493@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Bagas Sanjaya <bagasdotme@gmail.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Tested-by:
Ron Economos <re@w6rz.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Begunkov authored
commit 05b538c1 upstream. We can look inside the fixed buffer table only while holding ->uring_lock, however in some cases we don't do the right async prep for IORING_OP_{WRITE,READ}_FIXED ending up with NULL req->imu forcing making an io-wq worker to try to resolve the fixed buffer without proper locking. Move req->imu setup into early req init paths, i.e. io_prep_rw(), which is called unconditionally for rw requests and under uring_lock. Fixes: 634d00df ("io_uring: add full-fledged dynamic buffers support") Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since commit 4cf35a2b ("net: mscc: ocelot: fix broken IP multicast flooding") from v5.12, unregistered IP multicast flooding is configurable in the ocelot driver for bridged ports. However, by writing 0 to the PGID_MCIPV4 and PGID_MCIPV6 port masks at initialization time, the CPU port module, for which ocelot_port_set_mcast_flood() is not called, will have unknown IP multicast flooding disabled. This makes it impossible for an application such as smcroute to work properly, since all IP multicast traffic received on a standalone port is treated as unregistered (and dropped). Starting with commit 7569459a ("net: dsa: manage flooding on the CPU ports"), the limitation above has been lifted, because when standalone ports become IFF_PROMISC or IFF_ALLMULTI, ocelot_port_set_mcast_flood() would be called on the CPU port module, so unregistered multicast is flooded to the CPU on an as-needed basis. But between v5.12 and v5.18, IP multicast flooding to the CPU has remained broken, promiscuous or not. Delete the inexplicable premature optimization of clearing PGID_MCIPV4 and PGID_MCIPV6 as part of the init sequence, and allow unregistered IP multicast to be flooded freely to the CPU port module. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Cc: stable@kernel.org Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Ping-Ke Shih authored
commit e109e361 upstream. Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that reported RFE 6, which the driver did not support. Ping-Ke suggested a possible fix, but the user never reported back. A second user discovered the above thread and tested the proposed fix. Accordingly, I am pushing this change, even though I am not the author. [1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/ Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Reported-and-tested-by:
masterzorag <masterzorag@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107024739.20967-1-Larry.Finger@lwfinger.net Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Signed-off-by:
-
Guo-Feng Fan authored
commit b789e3fe upstream. RFE type4 is a new NIC which has one RF antenna shares with BT. RFE type4 HW is the same as RFE type2 but attaching antenna to aux antenna connector. RFE type2 attach antenna to main antenna connector. Load the same parameter as RFE type2 when initializing NIC. Signed-off-by:
Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210922023637.9357-1-pkshih@realtek.com Signed-off-by:
-
Christian Brauner authored
commit 168f9128 upstream. When calling setattr_prepare() to determine the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. This is exactly the same for idmapped and non-idmapped mounts and allows callers to pass in the values they want to see written to inode->i_{g,u}id. When group ownership is changed a caller whose fsuid owns the inode can change the group of the inode to any group they are a member of. When searching through the caller's groups we need to use the gid mapped according to the idmapped mount otherwise we will fail to change ownership for unprivileged users. Consider a caller running with fsuid and fsgid 1000 using an idmapped mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the idmapped mount. The caller now requests the gid of the file to be changed to 1000 going through the idmapped mount. In the vfs we will immediately map the requested gid to the value that will need to be written to inode->i_gid and place it in attr->ia_gid. Since this idmapped mount maps 65534 to 1000 we place 65534 in attr->ia_gid. When we check whether the caller is allowed to change group ownership we first validate that their fsuid matches the inode's uid. The inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount. Since the caller's fsuid is 1000 we pass the check. We now check whether the caller is allowed to change inode->i_gid to the requested gid by calling in_group_p(). This will compare the passed in gid to the caller's fsgid and search the caller's additional groups. Since we're dealing with an idmapped mount we need to pass in the gid mapped according to the idmapped mount. This is akin to checking whether a caller is privileged over the future group the inode is owned by. And that needs to take the idmapped mount into account. Note, all helpers are nops without idmapped mounts. New regression test sent to xfstests. Link: https://github.com/lxc/lxd/issues/10537 Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org Fixes: 2f221d6f ("attr: handle idmapped mounts") Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org # 5.15+ CC: linux-fsdevel@vger.kernel.org Reviewed-by:
Seth Forshee <sforshee@digitalocean.com> Signed-off-by:
-
Christian Brauner authored
commit 705191b0 upstream. Last cycle we extended the idmapped mounts infrastructure to support idmapped mounts of idmapped filesystems (No such filesystem yet exist.). Since then, the meaning of an idmapped mount is a mount whose idmapping is different from the filesystems idmapping. While doing that work we missed to adapt the acl translation helpers. They still assume that checking for the identity mapping is enough. But they need to use the no_idmapping() helper instead. Note, POSIX ACLs are always translated right at the userspace-kernel boundary using the caller's current idmapping and the initial idmapping. The order depends on whether we're coming from or going to userspace. The filesystem's idmapping doesn't matter at the border. Consequently, if a non-idmapped mount is passed we need to make sure to always pass the initial idmapping as the mount's idmapping and not the filesystem idmapping. Since it's irrelevant here it would yield invalid ids and prevent setting acls for filesystems that are mountable in a userns and support posix acls (tmpfs and fuse). I verified the regression reported in [1] and verified that this patch fixes it. A regression test will be added to xfstests in parallel. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215849 [1] Fixes: bd303368 ("fs: support mapped mounts of mapped filesystems") Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # 5.15+ Cc: <regressions@lists.linux.dev> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Christian Brauner authored
commit bd303368 upstream. In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
Christian Brauner authored
commit a1ec9040 upstream. Since we'll be passing the filesystem's idmapping in even more places in the following patches and we do already dereference struct inode to get to the filesystem's idmapping multiple times add a tiny helper. Link: https://lore.kernel.org/r/20211123114227.3124056-10-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-10-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-10-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
-
Christian Brauner authored
commit 209188ce upstream. Enable the mapped_fs{g,u}id() helpers to support filesystems mounted with an idmapping. Apart from core mapping helpers that use mapped_fs{g,u}id() to initialize struct inode's i_{g,u}id fields xfs is the only place that uses these low-level helpers directly. The patch only extends the helpers to be able to take the filesystem idmapping into account. Since we don't actually yet pass the filesystem's idmapping in no functional changes happen. This will happen in a final patch. Link: https://lore.kernel.org/r/20211123114227.3124056-9-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-9-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-9-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit 02e40799 upstream. Now that we ported all places to use the new low-level mapping helpers that are able to support filesystems mounted with an idmapping we can remove the old low-level mapping helpers. With the removal of these old helpers we also conclude the renaming of the mapping helpers we started in commit a65e58e7 ("fs: document and rename fsid helpers"). Link: https://lore.kernel.org/r/20211123114227.3124056-8-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-8-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-8-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit 44720713 upstream. In a few places the vfs needs to interact with bare k{g,u}ids directly instead of struct inode. These are just a few. In previous patches we introduced low-level mapping helpers that are able to support filesystems mounted an idmapping. This patch simply converts the places to use these new helpers. Link: https://lore.kernel.org/r/20211123114227.3124056-7-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-7-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-7-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit 8cc5c54d upstream. Now that we implement the full remapping algorithms described in our documentation remove the section about shortcircuting them. Link: https://lore.kernel.org/r/20211123114227.3124056-6-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-6-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-6-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit 1ac2a410 upstream. Currently we only support idmapped mounts for filesystems mounted without an idmapping. This was a conscious decision mentioned in multiple places (cf. e.g. [1]). As explained at length in [3] it is perfectly fine to extend support for idmapped mounts to filesystem's mounted with an idmapping should the need arise. The need has been there for some time now. Various container projects in userspace need this to run unprivileged and nested unprivileged containers (cf. [2]). Before we can port any filesystem that is mountable with an idmapping to support idmapped mounts we need to first extend the mapping helpers to account for the filesystem's idmapping. This again, is explained at length in our documentation at [3] but I'll give an overview here again. Currently, the low-level mapping helpers implement the remapping algorithms described in [3] in a simplified manner. Because we could rely on the fact that all filesystems supporting idmapped mounts are mounted without an idmapping the translation step from or into the filesystem idmapping could be skipped. In order to support idmapped mounts of filesystem's mountable with an idmapping the translation step we were able to skip before cannot be skipped anymore. A filesystem mounted with an idmapping is very likely to not use an identity mapping and will instead use a non-identity mapping. So the translation step from or into the filesystem's idmapping in the remapping algorithm cannot be skipped for such filesystems. More details with examples can be found in [3]. This patch adds a few new and prepares some already existing low-level mapping helpers to perform the full translation algorithm explained in [3]. The low-level helpers can be written in a way that they only perform the additional translation step when the filesystem is indeed mounted with an idmapping. If the low-level helpers detect that they are not dealing with an idmapped mount they can simply return the relevant k{g,u}id unchanged; no remapping needs to be performed at all. The no_idmapping() helper detects whether the shortcut can be used. If the low-level helpers detected that they are dealing with an idmapped mount but the underlying filesystem is mounted without an idmapping we can rely on the previous shorcut and can continue to skip the translation step from or into the filesystem's idmapping. These checks guarantee that only the minimal amount of work is performed. As before, if idmapped mounts aren't used the low-level helpers are idempotent and no work is performed at all. This patch adds the helpers mapped_k{g,u}id_fs() and mapped_k{g,u}id_user(). Following patches will port all places to replace the old k{g,u}id_into_mnt() and k{g,u}id_from_mnt() with these two new helpers. After the conversion is done k{g,u}id_into_mnt() and k{g,u}id_from_mnt() will be removed. This also concludes the renaming of the mapping helpers we started in [4]. Now, all mapping helpers will started with the "mapped_" prefix making everything nice and consistent. The mapped_k{g,u}id_fs() helpers replace the k{g,u}id_into_mnt() helpers. They are to be used when k{g,u}ids are to be mapped from the vfs, e.g. from from struct inode's i_{g,u}id. Conversely, the mapped_k{g,u}id_user() helpers replace the k{g,u}id_from_mnt() helpers. They are to be used when k{g,u}ids are to be written to disk, e.g. when entering from a system call to change ownership of a file. This patch only introduces the helpers. It doesn't yet convert the relevant places to account for filesystem mounted with an idmapping. [1]: commit 2ca4dcc4 ("fs/mount_setattr: tighten permission checks") [2]: https://github.com/containers/podman/issues/10374 [3]: Documentations/filesystems/idmappings.rst [4]: commit a65e58e7 ("fs: document and rename fsid helpers") Link: https://lore.kernel.org/r/20211123114227.3124056-5-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-5-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-5-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit 476860b3 upstream. If the caller's fs{g,u}id aren't mapped in the mount's idmapping we can return early and skip the check whether the mapped fs{g,u}id also have a mapping in the filesystem's idmapping. If the fs{g,u}id aren't mapped in the mount's idmapping they consequently can't be mapped in the filesystem's idmapping. So there's no point in checking that. Link: https://lore.kernel.org/r/20211123114227.3124056-4-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-4-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-4-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit a793d79e upstream. The low-level mapping helpers were so far crammed into fs.h. They are out of place there. The fs.h header should just contain the higher-level mapping helpers that interact directly with vfs objects such as struct super_block or struct inode and not the bare mapping helpers. Similarly, only vfs and specific fs code shall interact with low-level mapping helpers. And so they won't be made accessible automatically through regular {g,u}id helpers. Link: https://lore.kernel.org/r/20211123114227.3124056-3-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-3-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-3-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Christian Brauner authored
commit bb49e9e7 upstream. Multiple places open-code the same check to determine whether a given mount is idmapped. Introduce a simple helper function that can be used instead. This allows us to get rid of the fragile open-coding. We will later change the check that is used to determine whether a given mount is idmapped. Introducing a helper allows us to do this in a single place instead of doing it for multiple places. Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by:
-
Naveen N. Rao authored
commit 84ade0a6 upstream. Stop using the ftrace trampoline for init section once kernel init is complete. Fixes: 67361cf8 ("powerpc/ftrace: Handle large kernel configs") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220516071422.463738-1-naveen.n.rao@linux.vnet.ibm.com Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit b97cca3b ] In commit 02b9984d, we pushed a sync_filesystem() call from the VFS into xfs_fs_remount. The only time that we ever need to push dirty file data or metadata to disk for a remount is if we're remounting the filesystem read only, so this really could be moved to xfs_remount_ro. Once we've moved the call site, actually check the return value from sync_filesystem. Fixes: 02b9984d ("fs: push sync_filesystem() down to the file system's remount_fs()") Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Leah Rumancik <leah.rumancik@gmail.com> Acked-by:
-
Darrick J. Wong authored
[ Upstream commit f8d92a66 ] While I was running with KASAN and lockdep enabled, I stumbled upon an KASAN report about a UAF to a freed CIL checkpoint. Looking at the comment for xfs_log_item_in_current_chkpt, it seems pretty obvious to me that the original patch to xfs_defer_finish_noroll should have done something to lock the CIL to prevent it from switching the CIL contexts while the predicate runs. For upper level code that needs to know if a given log item is new enough not to need relogging, add a new wrapper that takes the CIL context lock long enough to sample the current CIL context. This is kind of racy in that the CIL can switch the contexts immediately after sampling, but that's ok because the consequence is that the defer ops code is a little slow to relog items. ================================================================== BUG: KASAN: use-after-free in xfs_log_item_in_current_chkpt+0x139/0x160 [xfs] Read of size 8 at addr ffff88804ea5f608 by task fsstress/527999 CPU: 1 PID: 527999 Comm: fsstress Tainted: G D 5.16.0-rc4-xfsx #rc4 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x83/0xdf xfs_log_item_in_current_chkpt+0x139/0x160 xfs_defer_finish_noroll+0x3bb/0x1e30 __xfs_trans_commit+0x6c8/0xcf0 xfs_reflink_remap_extent+0x66f/0x10e0 xfs_reflink_remap_blocks+0x2dd/0xa90 xfs_file_remap_range+0x27b/0xc30 vfs_dedupe_file_range_one+0x368/0x420 vfs_dedupe_file_range+0x37c/0x5d0 do_vfs_ioctl+0x308/0x1260 __x64_sys_ioctl+0xa1/0x170 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2c71a2950b Code: 0f 1e fa 48 8b 05 85 39 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 55 39 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe8c0e03c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005600862a8740 RCX: 00007f2c71a2950b RDX: 00005600862a7be0 RSI: 00000000c0189436 RDI: 0000000000000004 RBP: 000000000000000b R08: 0000000000000027 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000005a R13: 00005600862804a8 R14: 0000000000016000 R15: 00005600862a8a20 </TASK> Allocated by task 464064: kasan_save_stack+0x1e/0x50 __kasan_kmalloc+0x81/0xa0 kmem_alloc+0xcd/0x2c0 [xfs] xlog_cil_ctx_alloc+0x17/0x1e0 [xfs] xlog_cil_push_work+0x141/0x13d0 [xfs] process_one_work+0x7f6/0x1380 worker_thread+0x59d/0x1040 kthread+0x3b0/0x490 ret_from_fork+0x1f/0x30 Freed by task 51: kasan_save_stack+0x1e/0x50 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xed/0x130 slab_free_freelist_hook+0x7f/0x160 kfree+0xde/0x340 xlog_cil_committed+0xbfd/0xfe0 [xfs] xlog_cil_process_committed+0x103/0x1c0 [xfs] xlog_state_do_callback+0x45d/0xbd0 [xfs] xlog_ioend_work+0x116/0x1c0 [xfs] process_one_work+0x7f6/0x1380 worker_thread+0x59d/0x1040 kthread+0x3b0/0x490 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x50 __kasan_record_aux_stack+0xb7/0xc0 insert_work+0x48/0x2e0 __queue_work+0x4e7/0xda0 queue_work_on+0x69/0x80 xlog_cil_push_now.isra.0+0x16b/0x210 [xfs] xlog_cil_force_seq+0x1b7/0x850 [xfs] xfs_log_force_seq+0x1c7/0x670 [xfs] xfs_file_fsync+0x7c1/0xa60 [xfs] __x64_sys_fsync+0x52/0x80 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88804ea5f600 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 8 bytes inside of 256-byte region [ffff88804ea5f600, ffff88804ea5f700) The buggy address belongs to the page: page:ffffea00013a9780 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804ea5ea00 pfn:0x4ea5e head:ffffea00013a9780 order:1 compound_mapcount:0 flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff) raw: 04fff80000010200 ffffea0001245908 ffffea00011bd388 ffff888004c42b40 raw: ffff88804ea5ea00 0000000000100009 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804ea5f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88804ea5f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88804ea5f600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88804ea5f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88804ea5f700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fixes: 4e919af7 ("xfs: periodically relog deferred intent items") Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 09654ed8 ] Got a report that a repeated crash test of a container host would eventually fail with a log recovery error preventing the system from mounting the root filesystem. It manifested as a directory leaf node corruption on writeback like so: XFS (loop0): Mounting V5 Filesystem XFS (loop0): Starting recovery (logdev: internal) XFS (loop0): Metadata corruption detected at xfs_dir3_leaf_check_int+0x99/0xf0, xfs_dir3_leaf1 block 0x12faa158 XFS (loop0): Unmount and run xfs_repair XFS (loop0): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 3d f1 00 00 e1 9e d5 8b ........=....... 00000010: 00 00 00 00 12 fa a1 58 00 00 00 29 00 00 1b cc .......X...).... 00000020: 91 06 78 ff f7 7e 4a 7d 8d 53 86 f2 ac 47 a8 23 ..x..~J}.S...G.# 00000030: 00 00 00 00 17 e0 00 80 00 43 00 00 00 00 00 00 .........C...... 00000040: 00 00 00 2e 00 00 00 08 00 00 17 2e 00 00 00 0a ................ 00000050: 02 35 79 83 00 00 00 30 04 d3 b4 80 00 00 01 50 .5y....0.......P 00000060: 08 40 95 7f 00 00 02 98 08 41 fe b7 00 00 02 d4 .@.......A...... 00000070: 0d 62 ef a7 00 00 01 f2 14 50 21 41 00 00 00 0c .b.......P!A.... XFS (loop0): Corruption of in-memory data (0x8) detected at xfs_do_force_shutdown+0x1a/0x20 (fs/xfs/xfs_buf.c:1514). Shutting down. XFS (loop0): Please unmount the filesystem and rectify the problem(s) XFS (loop0): log mount/recovery failed: error -117 XFS (loop0): log mount failed Tracing indicated that we were recovering changes from a transaction at LSN 0x29/0x1c16 into a buffer that had an LSN of 0x29/0x1d57. That is, log recovery was overwriting a buffer with newer changes on disk than was in the transaction. Tracing indicated that we were hitting the "recovery immediately" case in xfs_buf_log_recovery_lsn(), and hence it was ignoring the LSN in the buffer. The code was extracting the LSN correctly, then ignoring it because the UUID in the buffer did not match the superblock UUID. The problem arises because the UUID check uses the wrong UUID - it should be checking the sb_meta_uuid, not sb_uuid. This filesystem has sb_uuid != sb_meta_uuid (which is fine), and the buffer has the correct matching sb_meta_uuid in it, it's just the code checked it against the wrong superblock uuid. The is no corruption in the filesystem, and failing to recover the buffer due to a write verifier failure means the recovery bug did not propagate the corruption to disk. Hence there is no corruption before or after this bug has manifested, the impact is limited simply to an unmountable filesystem.... This was missed back in 2015 during an audit of incorrect sb_uuid usage that resulted in commit fcfbe2c4 ("xfs: log recovery needs to validate against sb_meta_uuid") that fixed the magic32 buffers to validate against sb_meta_uuid instead of sb_uuid. It missed the magicda buffers.... Fixes: ce748eaa ("xfs: create new metadata UUID field and incompat flag") Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 089558bc ] As part of multiple customer escalations due to file data corruption after copy on write operations, I wrote some fstests that use fsstress to hammer on COW to shake things loose. Regrettably, I caught some filesystem shutdowns due to incorrect rmap operations with the following loop: mount <filesystem> # (0) fsstress <run only readonly ops> & # (1) while true; do fsstress <run all ops> mount -o remount,ro # (2) fsstress <run only readonly ops> mount -o remount,rw # (3) done When (2) happens, notice that (1) is still running. xfs_remount_ro will call xfs_blockgc_stop to walk the inode cache to free all the COW extents, but the blockgc mechanism races with (1)'s reader threads to take IOLOCKs and loses, which means that it doesn't clean them all out. Call such a file (A). When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which walks the ondisk refcount btree and frees any COW extent that it finds. This function does not check the inode cache, which means that incore COW forks of inode (A) is now inconsistent with the ondisk metadata. If one of those former COW extents are allocated and mapped into another file (B) and someone triggers a COW to the stale reservation in (A), A's dirty data will be written into (B) and once that's done, those blocks will be transferred to (A)'s data fork without bumping the refcount. The results are catastrophic -- file (B) and the refcount btree are now corrupt. Solve this race by forcing the xfs_blockgc_free_space to run synchronously, which causes xfs_icwalk to return to inodes that were skipped because the blockgc code couldn't take the IOLOCK. This is safe to do here because the VFS has already prohibited new writer threads. Fixes: 10ddf64e ("xfs: remove leftover CoW reservations when remounting ro") Signed-off-by:
Chandan Babu R <chandan.babu@oracle.com> Signed-off-by:
-
Yang Xu authored
[ Upstream commit a1de97fe ] When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1a ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1a ("xfs: Add xfs_has_attr and subroutines") Signed-off-by:
Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by:
-
Brian Foster authored
[ Upstream commit 5ca5916b ] If writeback I/O to a COW extent fails, the COW fork blocks are punched out and the data fork blocks left alone. It is possible for COW fork blocks to overlap non-shared data fork blocks (due to cowextsz hint prealloc), however, and writeback unconditionally maps to the COW fork whenever blocks exist at the corresponding offset of the page undergoing writeback. This means it's quite possible for a COW fork extent to overlap delalloc data fork blocks, writeback to convert and map to the COW fork blocks, writeback to fail, and finally for ioend completion to cancel the COW fork blocks and leave stale data fork delalloc blocks around in the inode. The blocks are effectively stale because writeback failure also discards dirty page state. If this occurs, it is likely to trigger assert failures, free space accounting corruption and failures in unrelated file operations. For example, a subsequent reflink attempt of the affected file to a new target file will trip over the stale delalloc in the source file and fail. Several of these issues are occasionally reproduced by generic/648, but are reproducible on demand with the right sequence of operations and timely I/O error injection. To fix this problem, update the ioend failure path to also punch out underlying data fork delalloc blocks on I/O error. This is analogous to the writeback submission failure path in xfs_discard_page() where we might fail to map data fork delalloc blocks and consistent with the successful COW writeback completion path, which is responsible for unmapping from the data fork and remapping in COW fork blocks. Fixes: 787eb485 ("xfs: fix and streamline error handling in xfs_end_io") Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Rustam Kovhaev authored
[ Upstream commit c30a0cbd ] For kmalloc() allocations SLOB prepends the blocks with a 4-byte header, and it puts the size of the allocated blocks in that header. Blocks allocated with kmem_cache_alloc() allocations do not have that header. SLOB explodes when you allocate memory with kmem_cache_alloc() and then try to free it with kfree() instead of kmem_cache_free(). SLOB will assume that there is a header when there is none, read some garbage to size variable and corrupt the adjacent objects, which eventually leads to hang or panic. Let's make XFS work with SLOB by using proper free function. Fixes: 9749fee8 ("xfs: enable the xfs_defer mechanism to process extents to free") Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by:
-
Coly Li authored
commit 7d6b902e upstream. The local variables check_state (in bch_btree_check()) and state (in bch_sectors_dirty_init()) should be fully filled by 0, because before allocating them on stack, they were dynamically allocated by kzalloc(). Signed-off-by:
Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Greg Kroah-Hartman authored
The build rightfully complains about: arch/x86/kernel/kvm.o: warning: objtool: __raw_callee_save___kvm_vcpu_is_preempted()+0x12: missing int3 after ret because the ASM_RET call is not being used correctly in kvm_vcpu_is_preempted(). This was hand-fixed-up in the kvm merge commit a4cfff3f ("Merge branch 'kvm-older-features' into HEAD") which of course can not be backported to stable kernels, so just fix this up directly instead. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
commit 23900951 upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c. Fixes: ae9e557b ("time: Export tick start/stop functions for rcutorture") Reported-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
- Jun 29, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220627111938.151743692@linuxfoundation.org Tested-by:
-
Jason A. Donenfeld authored
commit e561e472 upstream. The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Fortunately, each platform already has a setup_arch function pointer, which means it's easy to wire this up. This commit also removes some noisy log messages that don't add much. Fixes: a489043f ("powerpc/pseries: Implement arch_get_random_long() based on H_RANDOM") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Masahiro Yamada authored
commit 53632ba8 upstream. If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. Commit 3fdc7d3f ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix the issue at all. Now I realized I had applied a wrong patch. In v1 patch [1], the autoksyms_recursive target correctly recurses to "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive". In v2 patch [2], I accidentally dropped the diff line, and it recurses to "$(MAKE) -f $(srctree)/Makefile vmlinux". Restore the code I intended in v1. [1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/ [2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/ Fixes: 3fdc7d3f ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Dexuan Cui authored
commit 3be45625 upstream. The third parameter of dma_set_encrypted() is a size in bytes rather than the number of pages. Fixes: 4d056478 ("dma-direct: factor out dma_set_{de,en}crypted helpers") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Adrian Hunter authored
commit ab66fdac upstream. Build ID events associate a file name with a build ID. However, when using perf inject, there is no guarantee that the file on the current machine at the current time has that build ID. Fix by comparing the build IDs and skip adding to the cache if they are different. Example: $ echo "int main() {return 0;}" > prog.c $ gcc -o prog prog.c $ perf record --buildid-all ./prog [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data ] $ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; } $ file-buildid prog 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ echo "int main() {return 1;}" > prog.c $ gcc -o prog prog.c $ file-buildid prog 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 Before: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 $ After: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf $ Fixes: 454c407e ("perf: add perf-inject builtin") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jason A. Donenfeld authored
commit 63b8ea5e upstream. This comment wasn't updated when we moved from read() to read_iter(), so this patch makes the trivial fix. Fixes: 1b388e77 ("random: convert to using fops->read_iter()") Signed-off-by:
-
Stefan Wahren authored
commit b9b6d4c9 upstream. The GPIO expander line names has been fixed in the vendor tree last year, so upstream these changes. Fixes: 1c701acc ("ARM: dts: Add Raspberry Pi 400 support") Reported-by:
Ivan T. Ivanov <iivanov@suse.de> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Masahiro Yamada authored
commit 28438794 upstream. Since commit f02e8a65 ("module: Sort exported symbols"), EXPORT_SYMBOL* is placed in the individual section ___ksymtab(_gpl)+<sym> (3 leading underscores instead of 2). Since then, modpost cannot detect the bad combination of EXPORT_SYMBOL and __init/__exit. Fix the .fromsec field. Fixes: f02e8a65 ("module: Sort exported symbols") Signed-off-by:
-
Miaoqian Lin authored
commit 1ba904b6 upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 415f5914 ("ARM: cns3xxx: initial DT support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Acked-by:
Krzysztof Halasa <khalasa@piap.pl> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Miaoqian Lin authored
commit 1332661e upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in some error paths. To unify the structure, Add put_node label and goto it on errors. Fixes: 6e7674c3 ("memory: Add DMC driver for Exynos5422") Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20220602041721.64348-1-linmq006@gmail.com Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Miaoqian Lin authored
commit 7c7ff68d upstream. of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 1d22924e ("ARM: Add platform support for LSI AXM55xx SoC") Signed-off-by:
-
Miaoqian Lin authored
commit 37d838de upstream. of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. In brcmstb_init_sram, it pass dn to of_address_to_resource(), of_address_to_resource() will call of_find_device_by_node() to take reference, so we should release the reference returned by of_find_matching_node(). Fixes: 0b741b82 ("soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
