- Jul 29, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220727160959.122591422@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Pavel Machek (CIP) <pavel@denx.de> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jose Alonso authored
commit 36a15e1c upstream. The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by:
Jose Alonso <joalonsof@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jiri Slaby authored
commit a501ab75 upstream. There is a race in pty_write(). pty_write() can be called in parallel with e.g. ioctl(TIOCSTI) or ioctl(TCXONC) which also inserts chars to the buffer. Provided, tty_flip_buffer_push() in pty_write() is called outside the lock, it can commit inconsistent tail. This can lead to out of bounds writes and other issues. See the Link below. To fix this, we have to introduce a new helper called tty_insert_flip_string_and_push_buffer(). It does both tty_insert_flip_string() and tty_flip_buffer_commit() under the port lock. It also calls queue_work(), but outside the lock. See 71a174b3 (pty: do tty_flip_buffer_push without port->lock in pty_write) for the reasons. Keep the helper internal-only (in drivers' tty.h). It is not intended to be used widely. Link: https://seclists.org/oss-sec/2022/q2/155 Fixes: 71a174b3 (pty: do tty_flip_buffer_push without port->lock in pty_write) Cc: 一只狗 <chennbnbnb@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220707082558.9250-2-jslaby@suse.cz Signed-off-by:
-
Jiri Slaby authored
commit 716b1058 upstream. We will need this new helper in the next patch. Cc: Hillf Danton <hdanton@sina.com> Cc: 一只狗 <chennbnbnb@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jiri Slaby authored
commit 5db96ef2 upstream. Since commit a9c3f68f (tty: Fix low_latency BUG) in 2014, tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). All users were converted in the previous patches, so remove tty_schedule_flip() completely while inlining its body into tty_flip_buffer_push(). One less exported function. Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit b68b9144 upstream. Since commit a9c3f68f (tty: Fix low_latency BUG) in 2014, tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are going to remove the latter (as it is used less), so call the former in the rest of the users. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
-
Jiri Slaby authored
commit 5f6a8515 upstream. Since commit a9c3f68f (tty: Fix low_latency BUG) in 2014, tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are going to remove the latter (as it is used less), so call the former in drivers/tty/. Cc: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by:
-
Takashi Iwai authored
commit 5c1733e3 upstream. Currently the standard memory allocator (snd_dma_malloc_pages*()) passes the byte size to allocate as is. Most of the backends allocates real pages, hence the actual allocations are aligned in page size. However, the genalloc doesn't seem assuring the size alignment, hence it may result in the access outside the buffer when the whole memory pages are exposed via mmap. For avoiding such inconsistencies, this patch makes the allocation size always to be aligned in page size. Note that, after this change, snd_dma_buffer.bytes field contains the aligned size, not the originally requested size. This value is also used for releasing the pages in return. Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20201218145625.2045-2-tiwai@suse.de Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Eric Dumazet authored
commit 0326195f upstream. Classic BPF has a way to load bytes starting from the mac header. Some skbs do not have a mac header, and skb_mac_header() in this case is returning a pointer that 65535 bytes after skb->head. Existing range check in bpf_internal_load_pointer_neg_helper() was properly kicking and no illegal access was happening. New sanity check in skb_mac_header() is firing, so we need to avoid it. WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 skb_mac_header include/linux/skbuff.h:2785 [inline] WARNING: CPU: 1 PID: 28990 at include/linux/skbuff.h:2785 bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Modules linked in: CPU: 1 PID: 28990 Comm: syz-executor.0 Not tainted 5.19.0-rc4-syzkaller-00865-g4874fb9484be #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022 RIP: 0010:skb_mac_header include/linux/skbuff.h:2785 [inline] RIP: 0010:bpf_internal_load_pointer_neg_helper+0x1b1/0x1c0 kernel/bpf/core.c:74 Code: ff ff 45 31 f6 e9 5a ff ff ff e8 aa 27 40 00 e9 3b ff ff ff e8 90 27 40 00 e9 df fe ff ff e8 86 27 40 00 eb 9e e8 2f 2c f3 ff <0f> 0b eb b1 e8 96 27 40 00 e9 79 fe ff ff 90 41 57 41 56 41 55 41 RSP: 0018:ffffc9000309f668 EFLAGS: 00010216 RAX: 0000000000000118 RBX: ffffffffffeff00c RCX: ffffc9000e417000 RDX: 0000000000040000 RSI: ffffffff81873f21 RDI: 0000000000000003 RBP: ffff8880842878c0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000001 R12: 0000000000000004 R13: ffff88803ac56c00 R14: 000000000000ffff R15: dffffc0000000000 FS: 00007f5c88a16700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdaa9f6c058 CR3: 000000003a82c000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ____bpf_skb_load_helper_32 net/core/filter.c:276 [inline] bpf_skb_load_helper_32+0x191/0x220 net/core/filter.c:264 Fixes: f9aefd6b ("net: warn if mac header was not set") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220707123900.945305-1-edumazet@google.com Signed-off-by:
-
Wang Cheng authored
commit 018160ad upstream. mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy(). Link: https://lkml.kernel.org/r/20220512123428.fq3wofedp6oiotd4@ppc.localdomain Signed-off-by:
Wang Cheng <wanngchenng@gmail.com> Reported-by:
<syzbot+217f792c92599518a2ab@syzkaller.appspotmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jason A. Donenfeld authored
In 2019, Sergey fixed a lockdep splat with 15341b1d ("char/random: silence a lockdep splat with printk()"), but that got reverted soon after from 4.19 because back then it apparently caused various problems. But the issue it was fixing is still there, and more generally, many patches turning printk() into printk_deferred() have landed since, making me suspect it's okay to try this out again. This should fix the following deadlock found by the kernel test robot: [ 18.287691] WARNING: possible circular locking dependency detected [ 18.287692] 4.19.248-00165-g3d1f971aa81f #1 Not tainted [ 18.287693] ------------------------------------------------------ [ 18.287712] stop/202 is trying to acquire lock: [ 18.287713] (ptrval) (console_owner){..-.}, at: console_unlock (??:?) [ 18.287717] [ 18.287718] but task is already holding lock: [ 18.287718] (ptrval) (&(&port->lock)->rlock){-...}, at: pty_write (pty.c:?) [ 18.287722] [ 18.287722] which lock already depends on the new lock. [ 18.287723] [ 18.287724] [ 18.287725] the existing dependency chain (in reverse order) is: [ 18.287725] [ 18.287726] -> #2 (&(&port->lock)->rlock){-...}: [ 18.287729] validate_chain+0x84a/0xe00 [ 18.287729] __lock_acquire (lockdep.c:?) [ 18.287730] lock_acquire (??:?) [ 18.287731] _raw_spin_lock_irqsave (??:?) [ 18.287732] tty_port_tty_get (??:?) [ 18.287733] tty_port_default_wakeup (tty_port.c:?) [ 18.287734] tty_port_tty_wakeup (??:?) [ 18.287734] uart_write_wakeup (??:?) [ 18.287735] serial8250_tx_chars (??:?) [ 18.287736] serial8250_handle_irq (??:?) [ 18.287737] serial8250_default_handle_irq (8250_port.c:?) [ 18.287738] serial8250_interrupt (8250_core.c:?) [ 18.287738] __handle_irq_event_percpu (??:?) [ 18.287739] handle_irq_event_percpu (??:?) [ 18.287740] handle_irq_event (??:?) [ 18.287741] handle_edge_irq (??:?) [ 18.287742] handle_irq (??:?) [ 18.287742] do_IRQ (??:?) [ 18.287743] common_interrupt (entry_32.o:?) [ 18.287744] _raw_spin_unlock_irqrestore (??:?) [ 18.287745] uart_write (serial_core.c:?) [ 18.287746] process_output_block (n_tty.c:?) [ 18.287747] n_tty_write (n_tty.c:?) [ 18.287747] tty_write (tty_io.c:?) [ 18.287748] __vfs_write (??:?) [ 18.287749] vfs_write (??:?) [ 18.287750] ksys_write (??:?) [ 18.287750] sys_write (??:?) [ 18.287751] do_fast_syscall_32 (??:?) [ 18.287752] entry_SYSENTER_32 (??:?) [ 18.287752] [ 18.287753] -> #1 (&port_lock_key){-.-.}: [ 18.287756] [ 18.287756] -> #0 (console_owner){..-.}: [ 18.287759] check_prevs_add (lockdep.c:?) [ 18.287760] validate_chain+0x84a/0xe00 [ 18.287761] __lock_acquire (lockdep.c:?) [ 18.287761] lock_acquire (??:?) [ 18.287762] console_unlock (??:?) [ 18.287763] vprintk_emit (??:?) [ 18.287764] vprintk_default (??:?) [ 18.287764] vprintk_func (??:?) [ 18.287765] printk (??:?) [ 18.287766] get_random_u32 (??:?) [ 18.287767] shuffle_freelist (slub.c:?) [ 18.287767] allocate_slab (slub.c:?) [ 18.287768] new_slab (slub.c:?) [ 18.287769] ___slab_alloc+0x6d0/0xb20 [ 18.287770] __slab_alloc+0xd6/0x2e0 [ 18.287770] __kmalloc (??:?) [ 18.287771] tty_buffer_alloc (tty_buffer.c:?) [ 18.287772] __tty_buffer_request_room (tty_buffer.c:?) [ 18.287773] tty_insert_flip_string_fixed_flag (??:?) [ 18.287774] pty_write (pty.c:?) [ 18.287775] process_output_block (n_tty.c:?) [ 18.287776] n_tty_write (n_tty.c:?) [ 18.287777] tty_write (tty_io.c:?) [ 18.287778] __vfs_write (??:?) [ 18.287779] vfs_write (??:?) [ 18.287780] ksys_write (??:?) [ 18.287780] sys_write (??:?) [ 18.287781] do_fast_syscall_32 (??:?) [ 18.287782] entry_SYSENTER_32 (??:?) [ 18.287783] [ 18.287783] other info that might help us debug this: [ 18.287784] [ 18.287785] Chain exists of: [ 18.287785] console_owner --> &port_lock_key --> &(&port->lock)->rlock [ 18.287789] [ 18.287790] Possible unsafe locking scenario: [ 18.287790] [ 18.287791] CPU0 CPU1 [ 18.287792] ---- ---- [ 18.287792] lock(&(&port->lock)->rlock); [ 18.287794] lock(&port_lock_key); [ 18.287814] lock(&(&port->lock)->rlock); [ 18.287815] lock(console_owner); [ 18.287817] [ 18.287818] *** DEADLOCK *** [ 18.287818] [ 18.287819] 6 locks held by stop/202: [ 18.287820] #0: (ptrval) (&tty->ldisc_sem){++++}, at: ldsem_down_read (??:?) [ 18.287823] #1: (ptrval) (&tty->atomic_write_lock){+.+.}, at: tty_write_lock (tty_io.c:?) [ 18.287826] #2: (ptrval) (&o_tty->termios_rwsem/1){++++}, at: n_tty_write (n_tty.c:?) [ 18.287830] #3: (ptrval) (&ldata->output_lock){+.+.}, at: process_output_block (n_tty.c:?) [ 18.287834] #4: (ptrval) (&(&port->lock)->rlock){-...}, at: pty_write (pty.c:?) [ 18.287838] #5: (ptrval) (console_lock){+.+.}, at: console_trylock_spinning (printk.c:?) [ 18.287841] [ 18.287842] stack backtrace: [ 18.287843] CPU: 0 PID: 202 Comm: stop Not tainted 4.19.248-00165-g3d1f971aa81f #1 [ 18.287843] Call Trace: [ 18.287844] dump_stack (??:?) [ 18.287845] print_circular_bug.cold+0x78/0x8b [ 18.287846] check_prev_add+0x66a/0xd20 [ 18.287847] check_prevs_add (lockdep.c:?) [ 18.287848] validate_chain+0x84a/0xe00 [ 18.287848] __lock_acquire (lockdep.c:?) [ 18.287849] lock_acquire (??:?) [ 18.287850] ? console_unlock (??:?) [ 18.287851] console_unlock (??:?) [ 18.287851] ? console_unlock (??:?) [ 18.287852] ? native_save_fl (??:?) [ 18.287853] vprintk_emit (??:?) [ 18.287854] vprintk_default (??:?) [ 18.287855] vprintk_func (??:?) [ 18.287855] printk (??:?) [ 18.287856] get_random_u32 (??:?) [ 18.287857] ? shuffle_freelist (slub.c:?) [ 18.287858] shuffle_freelist (slub.c:?) [ 18.287858] ? page_address (??:?) [ 18.287859] allocate_slab (slub.c:?) [ 18.287860] new_slab (slub.c:?) [ 18.287861] ? pvclock_clocksource_read (??:?) [ 18.287862] ___slab_alloc+0x6d0/0xb20 [ 18.287862] ? kvm_sched_clock_read (kvmclock.c:?) [ 18.287863] ? __slab_alloc+0xbc/0x2e0 [ 18.287864] ? native_wbinvd (paravirt.c:?) [ 18.287865] __slab_alloc+0xd6/0x2e0 [ 18.287865] __kmalloc (??:?) [ 18.287866] ? __lock_acquire (lockdep.c:?) [ 18.287867] ? tty_buffer_alloc (tty_buffer.c:?) [ 18.287868] tty_buffer_alloc (tty_buffer.c:?) [ 18.287869] __tty_buffer_request_room (tty_buffer.c:?) [ 18.287869] tty_insert_flip_string_fixed_flag (??:?) [ 18.287870] pty_write (pty.c:?) [ 18.287871] process_output_block (n_tty.c:?) [ 18.287872] n_tty_write (n_tty.c:?) [ 18.287873] ? print_dl_stats (??:?) [ 18.287874] ? n_tty_ioctl (n_tty.c:?) [ 18.287874] tty_write (tty_io.c:?) [ 18.287875] ? n_tty_ioctl (n_tty.c:?) [ 18.287876] ? tty_write_unlock (tty_io.c:?) [ 18.287877] __vfs_write (??:?) [ 18.287877] vfs_write (??:?) [ 18.287878] ? __fget_light (file.c:?) [ 18.287879] ksys_write (??:?) Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Lech Perczak <l.perczak@camlintechnologies.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Sasha Levin <sashal@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: John Ogness <john.ogness@linutronix.de> Reported-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/Ytz+lo4zRQYG3JUR@xsang-OptiPlex-9020 Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Hristo Venev authored
[ Upstream commit d7241f67 ] be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once. Fixes: e36edd9d ("be2net: add ethtool "-m" option support") Signed-off-by:
Hristo Venev <hristo@venev.name> Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 55be8736 ] While reading sysctl_tcp_notsent_lowat, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 6305d821 ] While reading sysctl_igmp_max_memberships, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit f6da2267 ] While reading sysctl_igmp_llm_reports, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. if (ipv4_is_local_multicast(pmc->multiaddr) && !READ_ONCE(net->ipv4.sysctl_igmp_llm_reports)) Fixes: df2cf4a7 ("IGMP: Inhibit reports for local multicast groups") Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 4ca8ca87 ] Problems were observed on the Xilinx ZynqMP platform with large I2C reads. When a read of 277 bytes was performed, the controller NAKed the transfer after only 252 bytes were transferred and returned an ENXIO error on the transfer. There is some code in cdns_i2c_master_isr to handle this case by resetting the transfer count in the controller before it reaches 0, to allow larger transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT quirk being set on the controller, and ZynqMP uses the r1p14 version of the core where this quirk is not being set. The requirement to do this to support larger reads seems like an inherently required workaround due to the core only having an 8-bit transfer size register, so it does not appear that this should be conditional on the broken HOLD bit quirk which is used elsewhere in the driver. Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer size reset logic to fix this problem. Fixes: 63cab195 ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Reviewed-by:
Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com> Acked-by:
Michal Simek <michal.simek@amd.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 92c0aa41 ] While reading sysctl_tcp_probe_threshold, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6b58e0a5 ("ipv4: Use binary search to choose tcp PMTU probe_size") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 1a0008f9 ] While reading sysctl_tcp_fwmark_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 84f39b08 ("net: support marking accepting TCP sockets") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 85d0b4db ] While reading sysctl_fwmark_reflect, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: e110861f ("net: add a sysctl to reflect the fwmark on replies") Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 68e3c698 ] Yang Jihing reported a race between perf_event_set_output() and perf_mmap_close(): CPU1 CPU2 perf_mmap_close(e2) if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0 detach_rest = true ioctl(e1, IOC_SET_OUTPUT, e2) perf_event_set_output(e1, e2) ... list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry) ring_buffer_attach(e, NULL); // e1 isn't yet added and // therefore not detached ring_buffer_attach(e1, e2->rb) list_add_rcu(&e1->rb_entry, &e2->rb->event_list) After this; e1 is attached to an unmapped rb and a subsequent perf_mmap() will loop forever more: again: mutex_lock(&e->mmap_mutex); if (event->rb) { ... if (!atomic_inc_not_zero(&e->rb->mmap_count)) { ... mutex_unlock(&e->mmap_mutex); goto again; } } The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach in perf_event_set_output() holds e1->mmap_mutex. As such there is no serialization to avoid this race. Change perf_event_set_output() to take both e1->mmap_mutex and e2->mmap_mutex to alleviate that problem. Additionally, have the loop in perf_mmap() detach the rb directly, this avoids having to wait for the concurrent perf_mmap_close() to get around to doing it to make progress. Fixes: 9bb5d40c ("perf: Fix mmap() accounting hole") Reported-by:
Yang Jihong <yangjihong1@huawei.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by:
-
Miaoqian Lin authored
[ Upstream commit 80192eff ] of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 0e545f57 ("power: reset: driver for the Versatile syscon reboot") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Hangyu Hua authored
[ Upstream commit f85daf0e ] xfrm_policy_lookup() will call xfrm_pol_hold_rcu() to get a refcount of pols[0]. This refcount can be dropped in xfrm_expand_policies() when xfrm_expand_policies() return error. pols[0]'s refcount is balanced in here. But xfrm_bundle_lookup() will also call xfrm_pols_put() with num_pols == 1 to drop this refcount when xfrm_expand_policies() return error. This patch also fix an illegal address access. pols[0] will save a error point when xfrm_policy_lookup fails. This lead to xfrm_pols_put to resolve an illegal address in xfrm_bundle_lookup's error path. Fix these by setting num_pols = 0 in xfrm_expand_policies()'s error path. Fixes: 80c802f3 ("xfrm: cache bundles instead of policies for outgoing flows") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Shuah Khan authored
[ Upstream commit 2cd37c2e ] Set return value in rsp_buf alloc error path before going to error handling. drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ucr->rsp_buf) ^~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here return ret; ^~~ drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false if (!ucr->rsp_buf) ^~~~~~~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 Fixes: 3776c785 ("misc: rtsx_usb: use separate command and response buffers") Reported-by:
kernel test robot <lkp@intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Shuah Khan authored
[ Upstream commit 3776c785 ] rtsx_usb uses same buffer for command and response. There could be a potential conflict using the same buffer for both especially if retries and timeouts are involved. Use separate command and response buffers to avoid conflicts. Signed-off-by:
-
Shuah Khan authored
[ Upstream commit eb7f8e28 ] rtsx_usb driver allocates coherent dma buffer for urb transfers. This buffer is passed to usb_bulk_msg() and usb core tries to map already mapped buffer running into a dma mapping error. xhci_hcd 0000:01:00.0: rejecting DMA map of vmalloc memory WARNING: CPU: 1 PID: 279 at include/linux/dma-mapping.h:326 usb_ hcd_map_urb_for_dma+0x7d6/0x820 ... xhci_map_urb_for_dma+0x291/0x4e0 usb_hcd_submit_urb+0x199/0x12b0 ... usb_submit_urb+0x3b8/0x9e0 usb_start_wait_urb+0xe3/0x2d0 usb_bulk_msg+0x115/0x240 rtsx_usb_transfer_data+0x185/0x1a8 [rtsx_usb] rtsx_usb_send_cmd+0xbb/0x123 [rtsx_usb] rtsx_usb_write_register+0x12c/0x143 [rtsx_usb] rtsx_usb_probe+0x226/0x4b2 [rtsx_usb] Fix it to use kmalloc() to get DMA-able memory region instead. Signed-off-by:
-
Demi Marie Obenour authored
commit 166d3863 upstream. The error paths of gntdev_mmap() can call unmap_grant_pages() even though not all of the pages have been successfully mapped. This will trigger the WARN_ON()s in __unmap_grant_pages_done(). The number of warnings can be very large; I have observed thousands of lines of warnings in the systemd journal. Avoid this problem by only warning on unmapping failure if the handle being unmapped is not INVALID_GRANT_HANDLE. The handle field of any page that was not successfully mapped will be INVALID_GRANT_HANDLE, so this catches all cases where unmapping can legitimately fail. Fixes: dbe97cff ("xen/gntdev: Avoid blocking in unmap_grant_pages()") Cc: stable@vger.kernel.org Suggested-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by:
Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Reviewed-by:
-
Stephen Smalley authored
commit 3a2f5a59 upstream. As reported by yangshukui, a permission denial from security_task_wait() can lead to a soft lockup in zap_pid_ns_processes() since it only expects sys_wait4() to return 0 or -ECHILD. Further, security_task_wait() can in general lead to zombies; in the absence of some way to automatically reparent a child process upon a denial, the hook is not useful. Remove the security hook and its implementations in SELinux and Smack. Smack already removed its check from its hook. Reported-by:
yangshukui <yangshukui@huawei.com> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
Casey Schaufler <casey@schaufler-ca.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Alexander Grund <theflamefire89@gmail.com> Signed-off-by:
-
- Jul 21, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220719114455.701304968@linuxfoundation.org Tested-by:
-
Marc Kleine-Budde authored
commit 2e8e79c4 upstream. can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch. Fixes: 80646733 ("can: m_can: update to support CAN FD features") Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by:
Marc Kleine-Budde <mkl@pengutronix.de> [sudip: adjust context] Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Rik van Riel authored
commit e53ac737 upstream. Sometimes the page offlining code can leave behind a hwpoisoned clean page cache page. This can lead to programs being killed over and over and over again as they fault in the hwpoisoned page, get killed, and then get re-spawned by whatever wanted to run them. This is particularly embarrassing when the page was offlined due to having too many corrected memory errors. Now we are killing tasks due to them trying to access memory that probably isn't even corrupted. This problem can be avoided by invalidating the page from the page fault handler, which already has a branch for dealing with these kinds of pages. With this patch we simply pretend the page fault was successful if the page was invalidated, return to userspace, incur another page fault, read in the file from disk (to a new memory page), and then everything works again. Link: https://lkml.kernel.org/r/20220212213740.423efcea@imladris.surriel.com Signed-off-by:
Rik van Riel <riel@surriel.com> Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Acked-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [sudip: use int instead of vm_fault_t and adjust context] Signed-off-by:
-
Yi Yang authored
commit 6e690d54 upstream. If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by:
Yi Yang <yiyang13@huawei.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by:
-
Chanho Park authored
commit f7e35e4b upstream. The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by:
-
Thinh Nguyen authored
commit 7441b273 upstream. The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion. However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events. To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler. Fixes: d325a1de ("usb: dwc3: gadget: Prevent losing events in event cache") Cc: stable@vger.kernel.org Signed-off-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com Signed-off-by:
-
Lucien Buchmann authored
commit 7c239a07 upstream. Those two product ids are known. Signed-off-by:
Lucien Buchmann <lucien.buchmann@gmx.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
[ Upstream commit a382f8fe ] These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 38fa5479 ] The .brk section has the same properties as .bss: it is an alloc-only section and should be cleared before being used. Not doing so is especially a problem for Xen PV guests, as the hypervisor will validate page tables (check for writable page tables and hypervisor private bits) before accepting them to be used. Make sure .brk is initially zero by letting clear_bss() clear the brk area, too. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 0bc0ae9a ] The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
[ Upstream commit 5871321f ] We currently report that range controls accept a range of 0..(max-min) but accept writes in the range 0..(max-min+1). Remove that extra +1. Signed-off-by:
-
Michael Walle authored
[ Upstream commit 9577fc5f ] Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
-
Hangyu Hua authored
[ Upstream commit 00aff359 ] Free sk in case tipc_sk_insert() fails. Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by:
-
