- Jun 25, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220623164343.132308638@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willy Tarreau authored
commit e8161345 upstream. In commit 190cc824 ("tcp: change source port randomizarion at connect() time"), the table_perturb[] array was introduced and an index was taken from the port_offset via hash_32(). But it turns out that hash_32() performs a multiplication while the input here comes from the output of SipHash in secure_seq, that is well distributed enough to avoid the need for yet another hash. Suggested-by:
Amit Klein <aksecurity@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Willy Tarreau authored
commit 4c2c8f03 upstream. Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately identify a client by forcing it to emit only 40 times more connections than there are entries in the table_perturb[] table. The previous two improvements consisting in resalting the secret every 10s and adding randomness to each port selection only slightly improved the situation, and the current value of 2^8 was too small as it's not very difficult to make a client emit 10k connections in less than 10 seconds. Thus we're increasing the perturb table from 2^8 to 2^16 so that the same precision now requires 2.6M connections, which is more difficult in this time frame and harder to hide as a background activity. The impact is that the table now uses 256 kB instead of 1 kB, which could mostly affect devices making frequent outgoing connections. However such components usually target a small set of destinations (load balancers, database clients, perf assessment tools), and in practice only a few entries will be visited, like before. A live test at 1 million connections per second showed no performance difference from the previous value. Reported-by:
Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by:
Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by:
-
Willy Tarreau authored
commit e9261476 upstream. We'll need to further increase the size of this table and it's likely that at some point its size will not be suitable anymore for a static table. Let's allocate it on boot from inet_hashinfo2_init(), which is called from tcp_init(). Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit ca7af040 upstream. Here we're randomly adding between 0 and 7 random increments to the selected source port in order to add some noise in the source port selection that will make the next port less predictable. With the default port range of 32768-60999 this means a worst case reuse scenario of 14116/8=1764 connections between two consecutive uses of the same port, with an average of 14116/4.5=3137. This code was stressed at more than 800000 connections per second to a fixed target with all connections closed by the client using RSTs (worst condition) and only 2 connections failed among 13 billion, despite the hash being reseeded every 10 seconds, indicating a perfectly safe situation. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Willy Tarreau authored
commit 9e9b70ae upstream. Amit Klein suggests that we use different parts of port_offset for the table's index and the port offset so that there is no direct relation between them. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by:
-
Eric Dumazet authored
commit c579bd1b upstream. Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash Port Selection Algorithm), a patient attacker could still be able to collect enough state from an otherwise idle host. Idea of this patch is to inject some noise, in the cases __inet_hash_connect() found a candidate in the first attempt. This noise should not significantly reduce the collision avoidance, and should be zero if connection table is already well used. Note that this is not implementing RFC 6056 3.3.5 because we think Algorithm 5 could hurt typical workloads. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Colin Ian King authored
commit 91228844 upstream. Currently the header size calculations are using an assignment operator instead of a += operator when accumulating the header size leading to incorrect sizes. Fix this by using the correct operator. Addresses-Coverity: ("Unused value") Fixes: 302d3deb ("xprtrdma: Prevent inline overflow") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> [bwh: Backported to 4.14: adjust context] Signed-off-by:
-
Marian Postevca authored
commit b337af3a upstream. In systemd systems setting a fixed MAC address through the "dev_addr" module argument fails systematically. When checking the MAC address after the interface is created it always has the same but different MAC address to the one supplied as argument. This is partially caused by systemd which by default will set an internally generated permanent MAC address for interfaces that are marked as having a randomly generated address. Commit 890d5b40 ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") didn't take into account the fact that the interface must be marked as having a set MAC address when it's set as module argument. Fixed by marking the interface with NET_ADDR_SET when the "dev_addr" module argument is supplied. Fixes: 890d5b40 ("usb: gadget: u_ether: fix race in setting MAC address in setup phase") Cc: stable@vger.kernel.org Signed-off-by:
Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20220603153459.32722-1-posteuca@mutex.one Signed-off-by:
-
Christian Borntraeger authored
commit 3ae11dbc upstream. The switch to a keyed guest does not require a classic sske as the other guest CPUs are not accessing the key before the switch is complete. By using the NQ SSKE things are faster especially with multiple guests. Signed-off-by:
Christian Borntraeger <borntraeger@linux.ibm.com> Suggested-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220530092706.11637-3-borntraeger@linux.ibm.com Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
James Chapman authored
commit d02ba2a6 upstream. pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
James Chapman authored
commit 225eb264 upstream. Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
-
Murilo Opsfelder Araujo authored
commit 7e415282 upstream. GCC 12 enhanced -Waddress when comparing array address to null [0], which warns: drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’: drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress] 257 | if (vp_dev->msix_affinity_masks[i]) | ^~~~~~ In fact, the verification is comparing the result of a pointer arithmetic, the address "msix_affinity_masks + i", which will always evaluate to true. Under the hood, free_cpumask_var() calls kfree(), which is safe to pass NULL, not requiring non-null verification. So remove the verification to make compiler happy (happy compiler, happy life). [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103 Signed-off-by:
Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Christophe de Dinechin <dinechin@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Zhang Yi authored
commit b55c3cd1 upstream. We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled. Cc: stable@kernel.org Signed-off-by:
Zhang Yi <yi.zhang@huawei.com> Reviewed-by:
Ritesh Harjani <ritesh.list@gmail.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Ding Xiang authored
commit bc75a6eb upstream. Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to be a signed integer so we can correctly check for an error code returned by dx_make_map(). Fixes: 46c116b9 ("ext4: verify dir block before splitting it") Cc: stable@kernel.org Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com Signed-off-by:
-
Baokun Li authored
commit a08f789d upstream. Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] ================================================================== Above issue may happen as follows: ------------------------------------- do_fsync vfs_fsync_range ext4_sync_file file_write_and_wait_range __filemap_fdatawrite_range do_writepages ext4_writepages mpage_map_and_submit_extent mpage_map_one_extent ext4_map_blocks ext4_mb_new_blocks ext4_mb_normalize_request >>> start + size <= ac->ac_o_ex.fe_logical ext4_mb_regular_allocator ext4_mb_simple_scan_group ext4_mb_use_best_found ext4_mb_new_preallocation ext4_mb_new_inode_pa ext4_mb_use_inode_pa >>> set ac->ac_b_ex.fe_len <= 0 ext4_mb_mark_diskspace_used >>> BUG_ON(ac->ac_b_ex.fe_len <= 0); we can easily reproduce this problem with the following commands: `fallocate -l100M disk` `mkfs.ext4 -b 1024 -g 256 disk` `mount disk /mnt` `fsstress -d /mnt -l 0 -n 1000 -p 1` The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP. Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur when the size is truncated. So start should be the start position of the group where ac_o_ex.fe_logical is located after alignment. In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP is very large, the value calculated by start_off is more accurate. Cc: stable@kernel.org Fixes: cd648b8a ("ext4: trim allocation requests to group size") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Reviewed-by:
-
Ilpo Järvinen authored
commit be03b065 upstream. Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f58610 ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c914 ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by:
Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by:
-
Miaoqian Lin authored
commit 4757c9ad upstream. of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer. Fixes: 24a28e42 ("USB: gadget driver for LPC32xx") Cc: stable <stable@kernel.org> Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603140246.64529-1-linmq006@gmail.com Signed-off-by:
-
Miaoqian Lin authored
commit 3755278f upstream. usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
-
Robert Eckelmann authored
commit 908e698f upstream. Add support for Agilent E5805A (rebranded ION Edgeport/4) to io_ti. Signed-off-by:
Robert Eckelmann <longnoserob@gmail.com> Link: https://lore.kernel.org/r/20220521230808.30931eca@octoberrain Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Slark Xiao authored
commit 158f7585 upstream. Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. Below is test evidence: T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b8 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B8 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option For PID 00b8, interface 3 is GNSS port which don't use serial driver. Signed-off-by:
Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220601034740.5438-1-slark_xiao@163.com [ johan: rename defines using a "2" infix ] Cc: stable@vger.kernel.org Signed-off-by:
-
Ian Abbott authored
commit 242439f7 upstream. The expression for setting the size of the allocated bulk TX buffer (`devpriv->usb_tx_buf`) is calling `usb_endpoint_maxp(devpriv->ep_rx)`, which is using the wrong endpoint (should be `devpriv->ep_tx`). Fix it. Fixes: a23461c4 ("comedi: vmk80xx: fix transfer-buffer overflow") Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 4.9+ Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20220607171819.4121-1-abbotti@mev.co.uk Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit f4b98e31 ] of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 82b0a434 ("irqchip/gic/realview: Support more RealView DCC variants") Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220601080930.31005-2-linmq006@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Masahiro Yamada authored
[ Upstream commit 6a1c3767 ] This file fails to compile as follows: CC certs/blacklist_hashes.o certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes] 4 | const char __initdata *const blacklist_hashes[] = { | ^~~~~ In file included from certs/blacklist_hashes.c:2: certs/blacklist.h:5:38: note: previous declaration here 5 | extern const char __initconst *const blacklist_hashes[]; | ^~~~~~~~~~~~~~~~ Apply the same fix as commit 2be04df5 ("certs/blacklist_nohashes.c: fix const confusion in certs blacklist"). Fixes: 734114f8 ("KEYS: Add a system blacklist keyring") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by:
Mickaël Salaün <mic@linux.microsoft.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 3eefdf9d ] The branch range checks in ftrace_make_call() and ftrace_make_nop() are incorrect, erroneously permitting a forwards branch of 128M and erroneously rejecting a backwards branch of 128M. This is because both functions calculate the offset backwards, calculating the offset *from* the target *to* the branch, rather than the other way around as the later comparisons expect. If an out-of-range branch were erroeously permitted, this would later be rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks the bounds correctly, resulting in warnings and the placement of a BRK instruction. Note that this can only happen for a forwards branch of exactly 128M, and so the caller would need to be exactly 128M bytes below the relevant ftrace trampoline. If an in-range branch were erroeously rejected, then: * For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the use of a PLT entry, which is benign. Note that this is the common case, as this is selected by CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL), which distributions typically seelct. This is also selected by CONFIG_ARM64_ERRATUM_843419. * For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in internal ftrace failures. * For core kernel text, this would result in internal ftrace failues. Note that for this to happen, the kernel text would need to be at least 128M bytes in size, and typical configurations are smaller tha this. Fix this by calculating the offset *from* the branch *to* the target in both functions. Fixes: f8af0b36 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()") Fixes: e71a4e1b ("arm64: ftrace: add support for far branches to dynamic ftrace") Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by:
"Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by:
Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by:
Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.com Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit d7dd6ecc ] 'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by:
-
Miaoqian Lin authored
[ Upstream commit 1c245358 ] platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: eb1f2930 ("Driver for the Atmel on-chip SSC on AT32AP and AT91") Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 499e13aa ] Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ... Fixes: 465893e1 ("tty: goldfish: support platform_device with id -1") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com Signed-off-by:
-
Aleksandr Loktionov authored
[ Upstream commit fd5855e6 ] After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb26 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by:
Michal Jaron <michalx.jaron@intel.com> Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit fe44fb23 ] If the server tells us that a pNFS layout is not available for a specific file, then we should not keep pounding it with further layoutget requests. Fixes: 183d9e7b ("pnfs: rework LAYOUTGET retry handling") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Jason A. Donenfeld authored
[ Upstream commit 846bb97e ] This commit changes the default Kconfig values of RANDOM_TRUST_CPU and RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any existing configs or change any kernel behavior. The reason for this is several fold. As background, I recently had an email thread with the kernel maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void as recipients. I noted that some distros trust RDRAND, some trust EFI, and some trust both, and I asked why or why not. There wasn't really much of a "debate" but rather an interesting discussion of what the historical reasons have been for this, and it came up that some distros just missed the introduction of the bootloader Kconfig knob, while another didn't want to enable it until there was a boot time switch to turn it off for more concerned users (which has since been added). The result of the rather uneventful discussion is that every major Linux distro enables these two options by default. While I didn't have really too strong of an opinion going into this thread -- and I mostly wanted to learn what the distros' thinking was one way or another -- ultimately I think their choice was a decent enough one for a default option (which can be disabled at boot time). I'll try to summarize the pros and cons: Pros: - The RNG machinery gets initialized super quickly, and there's no messing around with subsequent blocking behavior. - The bootloader mechanism is used by kexec in order for the prior kernel to initialize the RNG of the next kernel, which increases the entropy available to early boot daemons of the next kernel. - Previous objections related to backdoors centered around Dual_EC_DRBG-like kleptographic systems, in which observing some amount of the output stream enables an adversary holding the right key to determine the entire output stream. This used to be a partially justified concern, because RDRAND output was mixed into the output stream in varying ways, some of which may have lacked pre-image resistance (e.g. XOR or an LFSR). But this is no longer the case. Now, all usage of RDRAND and bootloader seeds go through a cryptographic hash function. This means that the CPU would have to compute a hash pre-image, which is not considered to be feasible (otherwise the hash function would be terribly broken). - More generally, if the CPU is backdoored, the RNG is probably not the realistic vector of choice for an attacker. - These CPU or bootloader seeds are far from being the only source of entropy. Rather, there is generally a pretty huge amount of entropy, not all of which is credited, especially on CPUs that support instructions like RDRAND. In other words, assuming RDRAND outputs all zeros, an attacker would *still* have to accurately model every single other entropy source also in use. - The RNG now reseeds itself quite rapidly during boot, starting at 2 seconds, then 4, then 8, then 16, and so forth, so that other sources of entropy get used without much delay. - Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel command line, and paranoid system builders can set the Kconfig options to N, so there's no reduction or restriction of optionality. - It's a practical default. - All the distros have it set this way. Microsoft and Apple trust it too. Bandwagon. Cons: - RDRAND *could* still be backdoored with something like a fixed key or limited space serial number seed or another indexable scheme like that. (However, it's hard to imagine threat models where the CPU is backdoored like this, yet people are still okay making *any* computations with it or connecting it to networks, etc.) - RDRAND *could* be defective, rather than backdoored, and produce garbage that is in one way or another insufficient for crypto. - Suggesting a *reduction* in paranoia, as this commit effectively does, may cause some to question my personal integrity as a "security person". - Bootloader seeds and RDRAND are generally very difficult if not all together impossible to audit. Keep in mind that this doesn't actually change any behavior. This is just a change in the default Kconfig value. The distros already are shipping kernels that set things this way. Ard made an additional argument in [1]: We're at the mercy of firmware and micro-architecture anyway, given that we are also relying on it to ensure that every instruction in the kernel's executable image has been faithfully copied to memory, and that the CPU implements those instructions as documented. So I don't think firmware or ISA bugs related to RNGs deserve special treatment - if they are broken, we should quirk around them like we usually do. So enabling these by default is a step in the right direction IMHO. In [2], Phil pointed out that having this disabled masked a bug that CI otherwise would have caught: A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the static key warning (but it does go on to boot). The significant difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y defining that on top of multi_v7_defconfig demonstrates the issue on a clean 5.15.45. Conversely, not setting that option in a downstream kernel build avoids the warning [1] https://lore.kernel.org/lkml/CAMj1kXGi+ieviFjXv9zQBSaGyyzeGW_VpMpTLJK8PJb2QHEQ-w@mail.gmail.com/ [2] https://lore.kernel.org/lkml/c47c42e3-1d56-5859-a6ad-976a1a3381c6@raspberrypi.com/ Cc: Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Chen Lin authored
[ Upstream commit 2f2c0d29 ] When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by:
Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com Signed-off-by:
-
Wang Yufen authored
[ Upstream commit f638a84a ] When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max. Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.com Signed-off-by:
-
Xiaohui Zhang authored
[ Upstream commit 8a4d4807 ] Similar to the handling of play_deferred in commit 19cfe912 ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling. Signed-off-by:
Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn Signed-off-by:
-
chengkaitao authored
[ Upstream commit a58a7f97 ] The reference must be released when device_register(&vm_cmdline_parent) failed. Add the corresponding 'put_device()' in the error handling path. Signed-off-by:
chengkaitao <pilgrimtao@gmail.com> Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Chengguang Xu authored
[ Upstream commit ec1e8adc ] Fix missing resource cleanup (when '(--i) == 0') for error case in pmcraid_register_interrupt_handler(). Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Chengguang Xu authored
[ Upstream commit d64c4919 ] Fix missing resource cleanup (when '(--i) == 0') for error case in ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for error case in ipr_request_other_msi_irqs() because variable i started from 1. Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net Reviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 336d6361 ] After issuing a LIP, a specific target vendor does not ACC the FLOGI that lpfc sends. However, it does send its own FLOGI that lpfc ACCs. The target then establishes the port IDs by sending a PLOGI. lpfc PLOGI_ACCs and starts the RPI registration for DID 0x000001. The target then sends a LOGO to the fabric DID. lpfc is currently treating the LOGO from the fabric DID as a link down and cleans up all the ndlps. The ndlp for DID 0x000001 is put back into NPR and discovery stops, leaving the port in stuck in bypassed mode. Change lpfc behavior such that if a LOGO is received for the fabric DID in PT2PT topology skip the lpfc_linkdown_port() routine and just move the fabric DID back to NPR. Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com Co-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Wentao Wang authored
[ Upstream commit cf71d59c ] vcpuHint has been expanded to 16 bit on host to enable routing to more CPUs. Guest side should align with the change. This change has been tested with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can get correct value. Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com Signed-off-by:
Wentao Wang <wwentao@vmware.com> Signed-off-by:
-
Adam Ford authored
[ Upstream commit d1f5272c ] If the audio CODEC is playing sound when the system is suspended, it can be left in a state which throws the following error: wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16 Once this error has occurred, the audio will not work again until rebooted. Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS. Signed-off-by:
Adam Ford <aford173@gmail.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
