- May 02, 2011
-
-
Greg Kroah-Hartman authored
-
Igor Mammedov authored
commit c36b58e8 upstream. Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254a ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254a. Acked-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Stanislaw Gruszka authored
commit 332704a5 upstream. priv->tx_power_next is not initialized to max supported power, but instead default value is used, what cause errors like [ 58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14. [ 58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22). if maximum tx power read from the eeprom is smaller than default. In consequence card is unable to initialize properly. Fix the problem and cleanup tx power initialization. Reported-and-tested-by:
Robin Dong <hao.bigrat@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stanislaw Gruszka authored
commit 0263aa45 upstream. After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by:
-
Stanislaw Gruszka authored
commit 3bda50e3 upstream. Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit f844a709 upstream. Mac80211 can request for tx power and channel change in one ->config call. If that happens, *_send_tx_power functions will try to setup tx power for old channel, what can be not correct because we already change the band. I.e error "Failed to get channel info for channel 140 [0]", can be printed frequently when operating in software scanning mode. Signed-off-by:
-
Vasiliy Kulikov authored
commit b522f021 upstream. page_count is copied from userspace. agp_allocate_memory() tries to check whether this number is too big, but doesn't take into account the wrap case. Also agp_create_user_memory() doesn't check whether alloc_size is calculated from num_agp_pages variable without overflow. This may lead to allocation of too small buffer with following buffer overflow. Another problem in agp code is not addressed in the patch - kernel memory exhaustion (AGPIOC_RESERVE and AGPIOC_ALLOCATE ioctls). It is not checked whether requested pid is a pid of the caller (no check in agpioc_reserve_wrap()). Each allocation is limited to 16KB, though, there is no per-process limit. This might lead to OOM situation, which is not even solved in case of the caller death by OOM killer - the memory is allocated for another (faked) process. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Vasiliy Kulikov authored
commit 194b3da8 upstream. pg_start is copied from userspace on AGPIOC_BIND and AGPIOC_UNBIND ioctl cmds of agp_ioctl() and passed to agpioc_bind_wrap(). As said in the comment, (pg_start + mem->page_count) may wrap in case of AGPIOC_BIND, and it is not checked at all in case of AGPIOC_UNBIND. As a result, user with sufficient privileges (usually "video" group) may generate either local DoS or privilege escalation. Signed-off-by:
-
Dave Airlie authored
commit bf5192ed upstream. Multi-gpu/switcheroo relies on this option to get the console on the correct GPU at bootup, some distros enable it but it seems some get it wrong. Signed-off-by:
-
Richard Weinberger authored
commit 57d8e02e upstream. This adds support for 64 bit atomic operations on 32 bit UML systems. XFS needs them since 2.6.38. $ make ARCH=um SUBARCH=i386 ... LD .tmp_vmlinux1 fs/built-in.o: In function `xlog_regrant_reserve_log_space': xfs_log.c:(.text+0xd8584): undefined reference to `atomic64_read_386' xfs_log.c:(.text+0xd85ac): undefined reference to `cmpxchg8b_emu' ... Addresses https://bugzilla.kernel.org/show_bug.cgi?id=32812 Reported-by:
Martin Walch <walch.martin@web.de> Tested-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
commit 47c2199b upstream. Currently, the state manager may continue to try recovering state forever even after the last filesystem to reference that nfs_client has umounted. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Jeff Layton authored
commit 26c4c170 upstream. On a remount, the VFS layer will clear the MS_SYNCHRONOUS bit on the assumption that the flags on the mount syscall will have it set if the remounted fs is supposed to keep it. In the case of "noac" though, MS_SYNCHRONOUS is implied. A remount of such a mount will lose the MS_SYNCHRONOUS flag since "sync" isn't part of the mount options. Reported-by:
Max Matveev <makc@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Andrew Morton authored
commit 6d4831c2 upstream. Azurit reports large increases in system time after 2.6.36 when running Apache. It was bisected down to a892e2d7 ("vfs: use kmalloc() to allocate fdmem if possible"). That patch caused the vfs to use kmalloc() for very large allocations and this is causing excessive work (and presumably excessive reclaim) within the page allocator. Fix it by falling back to vmalloc() earlier - when the allocation attempt would have been considered "costly" by reclaim. Reported-by:
azurIt <azurit@pobox.sk> Tested-by:
Changli Gao <xiaosuo@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Michael Schmitz authored
commit 4aac0b48 upstream. For m68k, N_NORMAL_MEMORY represents all nodes that have present memory since it does not support HIGHMEM. This patch sets the bit at the time node_present_pages has been set by free_area_init_node. At the time the node is brought online, the node state would have to be done unconditionally since information about present memory has not yet been recorded. If N_NORMAL_MEMORY is not accurate, slub may encounter errors since it uses this nodemask to setup per-cache kmem_cache_node data structures. This pach is an alternative to the one proposed by David Rientjes <rientjes@google.com> attempting to set node state immediately when bringing the node online. Signed-off-by:
Michael Schmitz <schmitz@debian.org> Tested-by:
Thorsten Glaser <tg@debian.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Andrea Arcangeli authored
commit 78f11a25 upstream. The huge_memory.c THP page fault was allowed to run if vm_ops was null (which would succeed for /dev/zero MAP_PRIVATE, as the f_op->mmap wouldn't setup a special vma->vm_ops and it would fallback to regular anonymous memory) but other THP logics weren't fully activated for vmas with vm_file not NULL (/dev/zero has a not NULL vma->vm_file). So this removes the vm_file checks so that /dev/zero also can safely use THP (the other albeit safer approach to fix this bug would have been to prevent the THP initial page fault to run if vm_file was set). After removing the vm_file checks, this also makes huge_memory.c stricter in khugepaged for the DEBUG_VM=y case. It doesn't replace the vm_file check with a is_pfn_mapping check (but it keeps checking for VM_PFNMAP under VM_BUG_ON) because for a is_cow_mapping() mapping VM_PFNMAP should only be allowed to exist before the first page fault, and in turn when vma->anon_vma is null (so preventing khugepaged registration). So I tend to think the previous comment saying if vm_file was set, VM_PFNMAP might have been set and we could still be registered in khugepaged (despite anon_vma was not NULL to be registered in khugepaged) was too paranoid. The is_linear_pfn_mapping check is also I think superfluous (as described by comment) but under DEBUG_VM it is safe to stay. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=33682 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Caspar Zhang <bugs@casparzhang.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Mel Gorman authored
commit cc03638d upstream. With transparent hugepage support, handle_mm_fault() has to be careful that a normal PMD has been established before handling a PTE fault. To achieve this, it used __pte_alloc() directly instead of pte_alloc_map as pte_alloc_map is unsafe to run against a huge PMD. pte_offset_map() is called once it is known the PMD is safe. pte_alloc_map() is smart enough to check if a PTE is already present before calling __pte_alloc but this check was lost. As a consequence, PTEs may be allocated unnecessarily and the page table lock taken. Thi useless PTE does get cleaned up but it's a performance hit which is visible in page_test from aim9. This patch simply re-adds the check normally done by pte_alloc_map to check if the PTE needs to be allocated before taking the page table lock. The effect is noticable in page_test from aim9. AIM9 2.6.38-vanilla 2.6.38-checkptenone creat-clo 446.10 ( 0.00%) 424.47 (-5.10%) page_test 38.10 ( 0.00%) 42.04 ( 9.37%) brk_test 52.45 ( 0.00%) 51.57 (-1.71%) exec_test 382.00 ( 0.00%) 456.90 (16.39%) fork_test 60.11 ( 0.00%) 67.79 (11.34%) MMTests Statistics: duration Total Elapsed Time (seconds) 611.90 612.22 (While this affects 2.6.38, it is a performance rather than a functional bug and normally outside the rules -stable. While the big performance differences are to a microbench, the difference in fork and exec performance may be significant enough that -stable wants to consider the patch) Reported-by:
Raz Ben Yehuda <raziebe@gmail.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
KOSAKI Motohiro authored
commit f755a042 upstream. PTE pages eat up memory just like anything else, but we do not account for them in any way in the OOM scores. They are also _guaranteed_ to get freed up when a process is OOM killed, while RSS is not. Reported-by:
Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Amit Shah authored
commit afa2689e upstream. This call was disabled as hot-unplugging one virtconsole port led to another virtconsole port freezing. Upon testing it again, this now works, so enable it. In addition, a bug was found in qemu wherein removing a port of one type caused the guest output from another port to stop working. I doubt it was just this bug that caused it (since disabling the hvc_remove() call did allow other ports to continue working), but since it's all solved now, we're fine with hot-unplugging of virtconsole ports. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Patrick Boettcher authored
commit b934c20d upstream. This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Cc: Steffen Barszus <steffenbpunkt@googlemail.com> Cc: Boris Cuber <me@boris64.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
David Rientjes authored
commit d9b41e0b upstream. When a DISCONTIGMEM memory range is brought online as a NUMA node, it also needs to have its bet set in N_NORMAL_MEMORY. This is necessary for generic kernel code that utilizes N_NORMAL_MEMORY as a subset of N_ONLINE for memory savings. These types of hacks can hopefully be removed once DISCONTIGMEM is either removed or abstracted away from CONFIG_NUMA. Fixes a panic in the slub code which only initializes structures for N_NORMAL_MEMORY to save memory: Backtrace: [<000000004021c938>] add_partial+0x28/0x98 [<000000004021faa0>] __slab_free+0x1d0/0x1d8 [<000000004021fd04>] kmem_cache_free+0xc4/0x128 [<000000004033bf9c>] ida_get_new_above+0x21c/0x2c0 [<00000000402a8980>] sysfs_new_dirent+0xd0/0x238 [<00000000402a974c>] create_dir+0x5c/0x168 [<00000000402a9ab0>] sysfs_create_dir+0x98/0x128 [<000000004033d6c4>] kobject_add_internal+0x114/0x258 [<000000004033d9ac>] kobject_add_varg+0x7c/0xa0 [<000000004033df20>] kobject_add+0x50/0x90 [<000000004033dfb4>] kobject_create_and_add+0x54/0xc8 [<00000000407862a0>] cgroup_init+0x138/0x1f0 [<000000004077ce50>] start_kernel+0x5a0/0x840 [<000000004011fa3c>] start_parisc+0xa4/0xb8 [<00000000404bb034>] packet_ioctl+0x16c/0x208 [<000000004049ac30>] ip_mroute_setsockopt+0x260/0xf20 Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
James Bottomley authored
commit 4a5fa359 upstream. Slub makes assumptions about page_to_nid() which are violated by DISCONTIGMEM and !NUMA. This violation results in a panic because page_to_nid() can be non-zero for pages in the discontiguous ranges and this leads to a null return by get_node(). The assertion by the maintainer is that DISCONTIGMEM should only be allowed when NUMA is also defined. However, at least six architectures: alpha, ia64, m32r, m68k, mips, parisc violate this. The panic is a regression against slab, so just mark slub broken in the problem configuration to prevent users reporting these panics. Acked-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 7bed50c5 upstream. There is at least one BIOS with a DSDT containing a power resource object with a _PR0 entry pointing back to that power resource. In consequence, while registering that power resource acpi_bus_get_power_flags() sees that it depends on itself and tries to register it again, which leads to an infinitely deep recurrence. This problem was introduced by commit bf325f95 (ACPI / PM: Register power resource devices as soon as they are needed). To fix this problem use the observation that power resources cannot be power manageable and prevent acpi_bus_get_power_flags() from being called for power resource objects. References: https://bugzilla.kernel.org/show_bug.cgi?id=31872 Reported-and-tested-by:
Pascal Dormeau <pdormeau@free.fr> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Len Brown <lenb@kernel.org> Signed-off-by:
-
Heiko Carstens authored
commit e35c76cd upstream. f6649a7e "[S390] cleanup lowcore access from external interrupts" changed handling of external interrupts. Instead of letting the external interrupt handlers accessing the per cpu lowcore the entry code of the kernel reads already all fields that are necessary and passes them to the handlers. The pfault interrupt handler was incorrectly converted. It tries to dereference a value which used to be a pointer to a lowcore field. After the conversion however it is not anymore the pointer to the field but its content. So instead of a dereference only a cast is needed to get the task pointer that caused the pfault. Fixes a NULL pointer dereference and a subsequent kernel crash: Unable to handle kernel pointer dereference at virtual kernel address (null) Oops: 0004 [#1] SMP Modules linked in: nfsd exportfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc loop qeth_l3 qeth vmur ccwgroup ext3 jbd mbcache dm_mod dasd_eckd_mod dasd_diag_mod dasd_mod CPU: 0 Not tainted 2.6.38-2-s390x #1 Process cron (pid: 1106, task: 000000001f962f78, ksp: 000000001fa0f9d0) Krnl PSW : 0404200180000000 000000000002c03e (pfault_interrupt+0xa2/0x138) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000001 0000000000000000 0000000000000001 000000001f962f78 0000000000518968 0000000090000002 000000001ff03280 0000000000000000 000000000064f000 000000001f962f78 0000000000002603 0000000006002603 0000000000000000 000000001ff7fe68 000000001ff7fe48 Krnl Code: 000000000002c036: 5820d010 l %r2,16(%r13) 000000000002c03a: 1832 lr %r3,%r2 000000000002c03c: 1a31 ar %r3,%r1 >000000000002c03e: ba23d010 cs %r2,%r3,16(%r13) 000000000002c042: a744fffc brc 4,2c03a 000000000002c046: a7290002 lghi %r2,2 000000000002c04a: e320d0000024 stg %r2,0(%r13) 000000000002c050: 07f0 bcr 15,%r0 Call Trace: ([<000000001f962f78>] 0x1f962f78) [<000000000001acda>] do_extint+0xf6/0x138 [<000000000039b6ca>] ext_no_vtime+0x30/0x34 [<000000007d706e04>] 0x7d706e04 Last Breaking-Event-Address: [<0000000000000000>] 0x0 For stable maintainers: the first kernel which contains this bug is 2.6.37. Reported-by:
Stephen Powell <zlinuxman@wowway.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Carsten Otte authored
commit 9ff4cfb3 upstream. From: Christian Borntraeger <borntraeger@de.ibm.com> This patch fixes the sie exit on interrupts. The low level interrupt handler returns to the PSW address in pt_regs and not to the PSW address in the lowcore. Without this fix a cpu bound guest might never leave guest state since the host interrupt handler would blindly return to the SIE instruction, even on need_resched and friends. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 8c230d9a upstream. This patch fixes UBIFS mount failure when the debugging support is enabled, we are recovering from a power cut, we were first mounter R/O and we are re-mounting R/W. In this case we should not assume that the amount of free space before we have re-mounted R/W and after are equivalent, because when we have mounted R/O the file-system is in a non-committed state so the amount of free space is slightly smaller, due to the fact that we cannot predict the amount of free space precisely before we commit. This patch fixes the issue by skipping the debugging check in case of recovery. This issue was reported by Caizhiyong <caizhiyong@huawei.com> here: http://thread.gmane.org/gmane.linux.drivers.mtd/34350/focus=34387 Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Reported-by:
Caizhiyong <caizhiyong@huawei.com> Signed-off-by:
-
Felix Fietkau authored
commit 115dad7a upstream. The rx error bit parsing was changed to consider PHY errors and various decryption errors separately. While correct according to the documentation, this is causing spurious decryption error reports in some situations. Fix this by restoring the original order of the checks in those places, where the errors are meant to be mutually exclusive. If a CRC error is reported, then MIC failure and decryption errors are irrelevant, and a PHY error is unlikely. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Kyle McMartin authored
commit 25be5821 upstream. Commit da8aeb92 re-poked the battery on resume, but Linus reports that it broke his eee and partially reverted it in b23fffd7. Unfortunately this also results in my x201s giving crack values until the sysfs files are poked again. In the revert message, it was suggested that we poke it from a PM notifier, so let's do that. With this in place, I haven't noticed the units going nutty on my gnome-power-manager across a dozen suspends or so... Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Ike Panhc authored
commit 21651365 upstream. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922 On ideapad Y530, the brightness key notify will be blocked if the last notify is not responsed by getting the brightness value. Read value when we get the notify shall fix the problem and will not have any difference on other ideapads. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 6e0d9fd3 upstream. This patch fixes the following symptoms: 1. Unmount UBIFS cleanly. 2. Start mounting UBIFS R/W and have a power cut immediately 3. Start mounting UBIFS R/O, this succeeds 4. Try to re-mount UBIFS R/W - this fails immediately or later on, because UBIFS will write the master node to the flash area which has been written before. The analysis of the problem: 1. UBIFS is unmounted cleanly, both copies of the master node are clean. 2. UBIFS is being mounter R/W, starts changing master node copy 1, and a power cut happens. The copy N1 becomes corrupted. 3. UBIFS is being mounted R/O. It notices the copy N1 is corrupted and reads copy N2. Copy N2 is clean. 4. Because of R/O mode, UBIFS cannot recover copy 1. 5. The mount code (ubifs_mount()) sees that the master node is clean, so it decides that no recovery is needed. 6. We are re-mounting R/W. UBIFS believes no recovery is needed and starts updating the master node, but copy N1 is still corrupted and was not recovered! Fix this problem by marking the master node as dirty every time we recover it and we are in R/O mode. This forces further recovery and the UBIFS cleans-up the corruptions and recovers the copy N1 when re-mounting R/W later. Signed-off-by:
-
Ben Hutchings authored
commit 3ba41621 upstream. Commit 40aee729 ('kconfig: fix default value for choice input') fixed some cases where kconfig would select the wrong option from a choice with a single valid option and thus enter an infinite loop. However, this broke the test for user input of the form 'N?', because when kconfig selects the single valid option the input is zero-length and the test will read the byte before the input buffer. If this happens to contain '?' (as it will in a mips build on Debian unstable today) then kconfig again enters an infinite loop. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Tejun Heo authored
commit ae01b249 upstream. NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Maxime Bizon authored
commit 7b3a24c5 upstream. The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they are also called during port initialization, before ahci host irq handler is registered. On ce4100 platform, this sometimes triggers "irq 4: nobody cared" message when loading driver. Fixed this by not touching the register if the port is in frozen state, and mark all uninitialized port as frozen. Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> Acked-by:
-
Takashi Iwai authored
commit 6981d184 upstream. Acer laptops with ALC271x needs a magic initialization for digital-mic to make it working with mono streams (and PulseAudio). Added a fix-up applied to Acer with ALC271x generically. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit 1fdf9b49 upstream. Commit ce6120cc(ASoC: Decouple DAPM from CODECs) changed the signature of snd_soc_dapm_widgets_new to take an pointer to a snd_soc_dapm_context instead of a snd_soc_codec. The call to snd_soc_dapm_widgets_new in jz4740_codec_dev_probe was not updated to reflect this change, which results in a compiletime warning and a runtime OOPS. Since the core code calls snd_soc_dapm_widgets_new after the codec has been registered it can be dropped here. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
commit 39cca168 upstream. The output PGA was not being powered up in headphone and speaker paths, removing the ability to offer volume control and mute with the output PGA. Signed-off-by:
Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by:
-
Uwe Kleine-König authored
commit 5680e941 upstream. If cts changes between reading the level at the cts input (USR1_RTSS) and acking the irq (USR1_RTSD) the last edge doesn't generate an irq and uart_handle_cts_change is called with a outdated value for cts. The race was introduced by commit ceca629e ([ARM] 2971/1: i.MX uart handle rts irq) Reported-by:
Arwed Springer <Arwed.Springer@de.trumpf.com> Tested-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Mikhail Kshevetskiy authored
commit 9db4e438 upstream. Problem description: gsm_queue() calculate a CRC for arrived frames. As a last step of CRC calculation it call gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs); This work perfectly for the case of GSM0 mode as gsm->received_fcs contain the last piece of data required to generate final CRC. gsm->received_fcs is not used for GSM1 mode. Thus we put an additional byte to CRC calculation. As result we get a wrong CRC and reject incoming frame. Signed-off-by:
Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Mathew McKernan authored
commit d5627663 upstream. During detect() we would probe the connection bits to determine if there was a TV attached, and what video input type (Component, S-Video, Composite, etc) to use. However, we promptly discarded this vital bit of information and never propagated it to where it was used to determine the correct modes and setup the control registers. Fix it! This fixes a regression from 7b334fcb. Reported-and-tested-by:
Mathew McKernan <matmckernan@rauland.com.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35977 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Chris Wilson authored
commit f6e5b160 upstream. Similar to booting, we need to inspect the state left by the BIOS and remove any conflicting bits before we take over. The example reported by Seth Forshee is very similar to the bug we encountered with the state left by grub2, that the crtc pipe<->planning mapping was reversed from our expectations and so we failed to turn off the outputs when booting or, in this case, resuming. This may be in fact the same bug, but triggered at resume time. This patch rearranges the code we already have to clear up the conflicting state upon init and calls it from reset (which is called after we have lost control of the hardware, i.e. along both the boot and resume paths) instead. Reported-and-tested-by:
Seth Forshee <seth.forshee@canonical.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35796 Signed-off-by:
-
Alex Deucher authored
commit 8e461123 upstream. Noticed by Patrick Lowry. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
