- Jun 09, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230607200900.195572674@linuxfoundation.org Tested-by:
Florian Fainelli <florian.fainelli@broadcom.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
commit d652d5f1 upstream. Commit 991fcb77 ("drm/edid: Fix uninitialized variable in drm_cvt_modes()") just replaced one warning with another. The original warning about a possibly uninitialized variable was due to the compiler not being smart enough to see that the case statement actually enumerated all possible cases. And the initial fix was just to add a "default" case that had a single "unreachable()", just to tell the compiler that that situation cannot happen. However, that doesn't actually fix the fundamental reason for the problem: the compiler still doesn't see that the existing case statements enumerate all possibilities, so the compiler will still generate code to jump to that unreachable case statement. It just won't complain about an uninitialized variable any more. So now the compiler generates code to our inline asm marker that we told it would not fall through, and end end result is basically random. We have created a bridge to nowhere. And then, depending on the random details of just exactly what the compiler ends up doing, 'objtool' might end up complaining about the conditional branches (for conditions that cannot happen, and that thus will never be taken - but if the compiler was not smart enough to figure that out, we can't expect objtool to do so) going off in the weeds. So depending on how the compiler has laid out the result, you might see something like this: drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0() and now you have a truly inscrutable warning that makes no sense at all unless you start looking at whatever random code the compiler happened to generate for our bare "unreachable()" statement. IOW, don't use "unreachable()" unless you have an _active_ operation that generates code that actually makes it obvious that something is not reachable (ie an UD instruction or similar). Solve the "compiler isn't smart enough" problem by just marking one of the cases as "default", so that even when the compiler doesn't otherwise see that we've enumerated all cases, the compiler will feel happy and safe about there always being a valid case that initializes the 'width' variable. This also generates better code, since now the compiler doesn't generate comparisons for five different possibilities (the four real ones and the one that can't happen), but just for the three real ones and "the rest" (which is that last one). A smart enough compiler that sees that we cover all the cases won't care. Cc: Lyude Paul <lyude@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ping-Ke Shih authored
commit 93fbc1eb upstream. Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com Signed-off-by:
-
Lyude Paul authored
commit 991fcb77 upstream. Noticed this when trying to compile with -Wall on a kernel fork. We potentially don't set width here, which causes the compiler to complain about width potentially being uninitialized in drm_cvt_modes(). So, let's fix that. Changes since v1: * Don't emit an error as this code isn't reachable, just mark it as such Changes since v2: * Remove now unused variable Fixes: 3f649ab7 ("treewide: Remove uninitialized_var() usage") Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com Signed-off-by:
-
Selvin Xavier authored
commit 097a9d23 upstream. Driver crashes when destroy_qp is re-tried because of an error returned. This is because the qp entry was removed from the qp list during the first call. Remove qp from the list only if destroy_qp returns success. The driver will still trigger a WARN_ON due to the memory leaking, but at least it isn't corrupting memory too. Fixes: 8dae419f ("RDMA/bnxt_re: Refactor queue pair creation code") Link: https://lore.kernel.org/r/1598292876-26529-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
YueHaibing authored
commit a0b404a9 upstream. Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_create_gsi_qp': drivers/infiniband/hw/bnxt_re/ib_verbs.c:1283:30: warning: variable 'dev_attr' set but not used [-Wunused-but-set-variable] commit 8dae419f ("RDMA/bnxt_re: Refactor queue pair creation code") involved this, but not used, so remove it. Link: https://lore.kernel.org/r/20200227064542.91205-1-yuehaibing@huawei.com Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Ben Hutchings authored
adpt_isr() reads reply addresses from a hardware register, which should always be within the DMA address range of the device's pool of reply address buffers. In case the address is out of range, it tries to muddle on, converting to a virtual address using bus_to_virt(). bus_to_virt() does not take DMA addresses, and it doesn't make sense to try to handle the completion in this case. Ignore it and continue looping to service the interrupt. If a completion has been lost then the SCSI core should eventually time-out and trigger a reset. There is no corresponding upstream commit, because this driver was removed upstream. Fixes: 67af2b06 ("[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt ...") Signed-off-by:
Ben Hutchings <benh@debian.org> Signed-off-by:
-
Ben Hutchings authored
adpt_i2o_passthru() takes a user-provided message and passes it through to the hardware with appropriate translation of addresses and message IDs. It has a number of bugs: - When a message requires scatter/gather, it doesn't verify that the offset to the scatter/gather list is less than the message size. - When a message requires scatter/gather, it overwrites the DMA addresses with the user-space virtual addresses before unmapping the DMA buffers. - It reads the message from user memory multiple times. This allows user-space to change the message and bypass validation. - It assumes that the message is at least 4 words long, but doesn't check that. I tried fixing these, but even the maintainer of the corresponding user-space in Debian doesn't have the hardware any more. Instead, remove the pass-through ioctl (I2OUSRCMD) and supporting code. There is no corresponding upstream commit, because this driver was removed upstream. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 67af2b06 ("[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt ...") Signed-off-by:
-
Jim Wylder authored
commit 39815141 upstream. Currently, when regmap_raw_write() splits the data, it uses the max_raw_write value defined for the bus. For any bus that includes the target register address in the max_raw_write value, the chunked transmission will always exceed the maximum transmission length. To avoid this problem, subtract the length of the register and the padding from the maximum transmission. Signed-off-by:
Jim Wylder <jwylder@google.com> Link: https://lore.kernel.org/r/20230517152444.3690870-2-jwylder@google.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mirsad Goran Todorovac authored
commit 48e15602 upstream. The following kernel memory leak was noticed after running tools/testing/selftests/firmware/fw_run_tests.sh: [root@pc-mtodorov firmware]# cat /sys/kernel/debug/kmemleak . . . unreferenced object 0xffff955389bc3400 (size 1024): comm "test_firmware-0", pid 5451, jiffies 4294944822 (age 65.652s) hex dump (first 32 bytes): 47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0 [<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240 [<ffffffff962704de>] kmalloc_trace+0x2e/0xc0 [<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180 [<ffffffff95fd813b>] kthread+0x10b/0x140 [<ffffffff95e033e9>] ret_from_fork+0x29/0x50 unreferenced object 0xffff9553c334b400 (size 1024): comm "test_firmware-1", pid 5452, jiffies 4294944822 (age 65.652s) hex dump (first 32 bytes): 47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0 [<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240 [<ffffffff962704de>] kmalloc_trace+0x2e/0xc0 [<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180 [<ffffffff95fd813b>] kthread+0x10b/0x140 [<ffffffff95e033e9>] ret_from_fork+0x29/0x50 unreferenced object 0xffff9553c334f000 (size 1024): comm "test_firmware-2", pid 5453, jiffies 4294944822 (age 65.652s) hex dump (first 32 bytes): 47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0 [<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240 [<ffffffff962704de>] kmalloc_trace+0x2e/0xc0 [<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180 [<ffffffff95fd813b>] kthread+0x10b/0x140 [<ffffffff95e033e9>] ret_from_fork+0x29/0x50 unreferenced object 0xffff9553c3348400 (size 1024): comm "test_firmware-3", pid 5454, jiffies 4294944822 (age 65.652s) hex dump (first 32 bytes): 47 48 34 35 36 37 0a 00 00 00 00 00 00 00 00 00 GH4567.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff962f5dec>] slab_post_alloc_hook+0x8c/0x3c0 [<ffffffff962fcca4>] __kmem_cache_alloc_node+0x184/0x240 [<ffffffff962704de>] kmalloc_trace+0x2e/0xc0 [<ffffffff9665b42d>] test_fw_run_batch_request+0x9d/0x180 [<ffffffff95fd813b>] kthread+0x10b/0x140 [<ffffffff95e033e9>] ret_from_fork+0x29/0x50 [root@pc-mtodorov firmware]# Note that the size 1024 corresponds to the size of the test firmware buffer. The actual number of the buffers leaked is around 70-110, depending on the test run. The cause of the leak is the following: request_partial_firmware_into_buf() and request_firmware_into_buf() provided firmware buffer isn't released on release_firmware(), we have allocated it and we are responsible for deallocating it manually. This is introduced in a number of context where previously only release_firmware() was called, which was insufficient. Reported-by:
Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 7feebfa4 ("test_firmware: add support for request_firmware_into_buf") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dan Carpenter <error27@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Tianfei zhang <tianfei.zhang@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Zhengchao Shao <shaozhengchao@huawei.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Scott Branden <sbranden@broadcom.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org # v5.4 Signed-off-by:
-
Helge Deller authored
commit d78bd6cc upstream. syzbot repored this bug in the softcursor code: BUG: KASAN: null-ptr-deref in soft_cursor+0x384/0x6b4 drivers/video/fbdev/core/softcursor.c:70 Read of size 16 at addr 0000000000000200 by task kworker/u4:1/12 CPU: 0 PID: 12 Comm: kworker/u4:1 Not tainted 6.4.0-rc3-syzkaller-geb0f1697d729 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: events_power_efficient fb_flashcursor Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_report+0xe4/0x514 mm/kasan/report.c:465 kasan_report+0xd4/0x130 mm/kasan/report.c:572 kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 __asan_memcpy+0x3c/0x84 mm/kasan/shadow.c:105 soft_cursor+0x384/0x6b4 drivers/video/fbdev/core/softcursor.c:70 bit_cursor+0x113c/0x1a64 drivers/video/fbdev/core/bitblit.c:377 fb_flashcursor+0x35c/0x54c drivers/video/fbdev/core/fbcon.c:380 process_one_work+0x788/0x12d4 kernel/workqueue.c:2405 worker_thread+0x8e0/0xfe8 kernel/workqueue.c:2552 kthread+0x288/0x310 kernel/kthread.c:379 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:853 This fix let bit_cursor() bail out early when a font bitmap isn't available yet. Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
<syzbot+d910bd780e6efac35869@syzkaller.appspotmail.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit aff3bea9 upstream. Treat i_data_sem for ea_inodes as being in their own lockdep class to avoid lockdep complaints about ext4_setattr's use of inode_lock() on normal inodes potentially causing lock ordering with i_data_sem on ea_inodes in ext4_xattr_inode_write(). However, ea_inodes will be operated on by ext4_setattr(), so this isn't a problem. Cc: stable@kernel.org Link: https://syzkaller.appspot.com/bug?extid=298c5d8fb4a128bc27b0 Reported-by:
<syzbot+298c5d8fb4a128bc27b0@syzkaller.appspotmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20230524034951.779531-5-tytso@mit.edu Signed-off-by:
-
Theodore Ts'o authored
commit 2bc7e7c1 upstream. An ea_inode stores the value of an extended attribute; it can not have extended attributes itself, or this will cause recursive nightmares. Add a check in ext4_iget() to make sure this is the case. Cc: stable@kernel.org Reported-by:
<syzbot+e44749b6ba4d0434cd47@syzkaller.appspotmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit b928dfdc upstream. If the ea_inode has been pushed out of the inode cache while there is still a reference in the mb_cache, the lockdep subclass will not be set on the inode, which can lead to some lockdep false positives. Fixes: 33d201e0 ("ext4: fix lockdep warning about recursive inode locking") Cc: stable@kernel.org Reported-by:
<syzbot+d4b971e744b1f5439336@syzkaller.appspotmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit b3e6bcb9 upstream. Add a new flag, EXT4_IGET_EA_INODE which indicates whether the inode is expected to have the EA_INODE flag or not. If the flag is not set/clear as expected, then fail the iget() operation and mark the file system as corrupted. This commit also makes the ext4_iget() always perform the is_bad_inode() check even when the inode is already inode cache. This allows us to remove the is_bad_inode() check from the callers of ext4_iget() in the ea_inode code. Reported-by:
<syzbot+cbb68193bdb95af4340a@syzkaller.appspotmail.com> Reported-by:
<syzbot+62120febbd1ee3c3c860@syzkaller.appspotmail.com> Reported-by:
<syzbot+edce54daffee36421b4c@syzkaller.appspotmail.com> Cc: stable@kernel.org Signed-off-by:
-
Pietro Borrello authored
commit 81d0fa4c upstream. All callers of trace_probe_primary_from_call() check the return value to be non NULL. However, the function returns list_first_entry(&tpe->probes, ...) which can never be NULL. Additionally, it does not check for the list being possibly empty, possibly causing a type confusion on empty lists. Use list_first_entry_or_null() which solves both problems. Link: https://lore.kernel.org/linux-trace-kernel/20230128-list-entry-null-check-v1-1-8bde6a3da2ef@diag.uniroma1.it/ Fixes: 60d53e2c ("tracing/probe: Split trace_event related data from trace_probe") Signed-off-by:
Pietro Borrello <borrello@diag.uniroma1.it> Reviewed-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by:
Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Paul Moore authored
commit 42c4e97e upstream. The Linux Kernel currently only requires make v3.82 while the grouped target functionality requires make v4.3. Removed the grouped target introduced in 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") as well as the multiple header file targets in the make rule. This effectively reverts the problem commit. We will revisit this change when make >= 4.3 is required by the rest of the kernel. Cc: stable@vger.kernel.org Fixes: 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") Reported-by:
Erwan Velu <e.velu@criteo.com> Reported-by:
Luiz Capitulino <luizcap@amazon.com> Tested-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Sherry Sun authored
commit 2474e054 upstream. LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by:
-
Deren Wu authored
commit a99d21ce upstream. We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7b ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jakub Kicinski authored
commit ee3db469 upstream. The .value is a two-dim array, not a pointer. struct iqk_matrix_regs { bool iqk_done; long value[1][IQK_MATRIX_REG_NUM]; }; Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
commit 8306b057 upstream. Clang warns: ../lib/dynamic_debug.c:1034:24: warning: array comparison always evaluates to false [-Wtautological-compare] if (__start___verbose == __stop___verbose) { ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Jason Baron <jbaron@akamai.com> Link: https://github.com/ClangBuiltLinux/linux/issues/894 Link: http://lkml.kernel.org/r/20200220051320.10739-1-natechancellor@gmail.com Signed-off-by:
-
Kees Cook authored
commit 3f649ab7 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Nathan Chancellor authored
commit 63174f61 upstream. Clang warns: ../kernel/extable.c:37:52: warning: array comparison always evaluates to a constant [-Wtautological-compare] if (main_extable_sort_needed && __stop___ex_table > __start___ex_table) { ^ 1 warning generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Suggested-by:
-
Martin Liška authored
commit 32329216 upstream. Fixes the following GCC warning: drivers/net/ethernet/sun/cassini.c:1316:29: error: comparison between two arrays [-Werror=array-compare] drivers/net/ethernet/sun/cassini.c:3783:34: error: comparison between two arrays [-Werror=array-compare] Note that 2 arrays should be compared by comparing of their addresses: note: use ‘&cas_prog_workaroundtab[0] == &cas_prog_null[0]’ to compare the addresses Signed-off-by:
Martin Liska <mliska@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Linus Torvalds authored
commit f7d63b50 upstream. [ Upstream commit 49beadbd ] While the concept of checking for dangling pointers to local variables at function exit is really interesting, the gcc-12 implementation is not compatible with reality, and results in false positives. For example, gcc sees us putting things on a local list head allocated on the stack, which involves exactly those kinds of pointers to the local stack entry: In function ‘__list_add’, inlined from ‘list_add_tail’ at include/linux/list.h:102:2, inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2: include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=] 74 | new->prev = prev; | ~~~~~~~~~~^~~~~~ But then gcc - understandably - doesn't really understand the big picture how the doubly linked list works, so doesn't see how we then end up emptying said list head in a loop and the pointer we added has been removed. Gcc also complains about us (intentionally) using this as a way to store a kind of fake stack trace, eg drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=] 40 | acpi_gbl_entry_stack_pointer = ¤t_sp; | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~ which is entirely reasonable from a compiler standpoint, and we may want to change those kinds of patterns, but not not. So this is one of those "it would be lovely if the compiler were to complain about us leaving dangling pointers to the stack", but not this way. Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Adam Borowski authored
commit e5b5d254 upstream. Address of a field inside a struct can't possibly be null; gcc-12 warns about this. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Kees Cook authored
commit aeb84412 upstream. GCC 11 (incorrectly[1]) assumes that literal values cast to (void *) should be treated like a NULL pointer with an offset, and raises diagnostics when doing bounds checking under -Warray-bounds. GCC 12 got "smarter" about finding these: In function 'rdfs8', inlined from 'vga_recalc_vertical' at /srv/code/arch/x86/boot/video-mode.c:124:29, inlined from 'set_mode' at /srv/code/arch/x86/boot/video-mode.c:163:3: /srv/code/arch/x86/boot/boot.h:114:9: warning: array subscript 0 is outside array bounds of 'u8[0]' {aka 'unsigned char[]'} [-Warray-bounds] 114 | asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*(u8 *)addr)); | ^~~ This has been solved in other places[2] already by using the recently added absolute_pointer() macro. Do the same here. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578 [2] https://lore.kernel.org/all/20210912160149.2227137-1-linux@roeck-us.net/ Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Arnd Bergmann authored
commit 0af413bd upstream. The fl_flow_key structure is around 500 bytes, so having two of them on the stack in one function now exceeds the warning limit after an otherwise correct change: net/sched/cls_flower.c:298:12: error: stack frame size of 1056 bytes in function 'fl_classify' [-Werror,-Wframe-larger-than=] I suspect the fl_classify function could be reworked to only have one of them on the stack and modify it in place, but I could not work out how to do that. As a somewhat hacky workaround, move one of them into an out-of-line function to reduce its scope. This does not necessarily reduce the stack usage of the outer function, but at least the second copy is removed from the stack during most of it and does not add up to whatever is called from there. I now see 552 bytes of stack usage for fl_classify(), plus 528 bytes for fl_mask_lookup(). Fixes: 58cff782 ("flow_dissector: Parse multiple MPLS Label Stack Entries") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Damien Le Moal authored
commit 7f875850 upstream. For devices not attached to a port multiplier and managed directly by libata, the device number passed to ata_find_dev() must always be lower than the maximum number of devices returned by ata_link_max_devices(). That is 1 for SATA devices or 2 for an IDE link with master+slave devices. This device number is the SCSI device ID which matches these constraints as the IDs are generated per port and so never exceed the maximum number of devices for the link being used. However, for libsas managed devices, SCSI device IDs are assigned per struct scsi_host, leading to device IDs for SATA devices that can be well in excess of libata per-link maximum number of devices. This results in ata_find_dev() to always return NULL for libsas managed devices except for the first device of the target scsi_host with ID (device number) equal to 0. This issue is visible by executing the hdparm utility, which fails. E.g.: hdparm -i /dev/sdX /dev/sdX: HDIO_GET_IDENTITY failed: No message of desired type Fix this by rewriting ata_find_dev() to ignore the device number for non-PMP attached devices with a link with at most 1 device, that is SATA devices. For these, the device number 0 is always used to return the correct pointer to the struct ata_device of the port link. This change excludes IDE master/slave setups (maximum number of devices per link is 2) and port-multiplier attached devices. Also, to be consistant with the fact that SCSI device IDs and channel numbers used as device numbers are both unsigned int, change the devno argument of ata_find_dev() to unsigned int. Reported-by:
Xingui Yang <yangxingui@huawei.com> Fixes: 41bda9c9 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Bart Van Assche authored
commit 6d074ce2 upstream. gcc 13 may assign another type to enumeration constants than gcc 12. Split the large enum at the top of source file stex.c such that the type of the constants used in time expressions is changed back to the same type chosen by gcc 12. This patch suppresses compiler warnings like this one: In file included from ./include/linux/bitops.h:7, from ./include/linux/kernel.h:22, from drivers/scsi/stex.c:13: drivers/scsi/stex.c: In function ‘stex_common_handshake’: ./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror] 12 | (void)(&__dummy == &__dummy2); \ | ^~ ./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’ 106 | typecheck(unsigned long, b) && \ | ^~~~~~~~~ drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’ 1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) { | ^~~~~~~~~~ See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405 . Cc: stable@vger.kernel.org Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Richard Acayan authored
commit 46248400 upstream. The channel's rpmsg object allows new invocations to be made. After old invocations are already interrupted, the driver shouldn't try to invoke anymore. Invalidating the rpmsg at the end of the driver removal function makes it easy to cause a race condition in userspace. Even closing a file descriptor before the driver finishes its cleanup can cause an invocation via fastrpc_release_current_dsp_process() and subsequent timeout. Invalidate the channel before the invocations are interrupted to make sure that no invocations can be created to hang after the device closes. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by:
Richard Acayan <mailingradian@gmail.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org Signed-off-by:
-
Richard Acayan authored
commit b6a06285 upstream. The return value is initialized as -1, or -EPERM. The completion of an invocation implies that the return value is set appropriately, but "Permission denied" does not accurately describe the outcome of the invocation. Set the invocation's return value to a more appropriate "Broken pipe", as the cleanup breaks the driver's connection with rpmsg. Fixes: c68cfb71 ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by:
-
Uttkarsh Aggarwal authored
commit efb6b535 upstream. While exercising the unbind path, with the current implementation the functionfs_unbind would be calling which waits for the ffs->mutex to be available, however within the same time ffs_ep0_read is invoked & if no setup packets are pending, it will invoke function wait_event_interruptible_exclusive_locked_irq which by definition waits for the ev.count to be increased inside the same mutex for which functionfs_unbind is waiting. This creates deadlock situation because the functionfs_unbind won't get the lock until ev.count is increased which can only happen if the caller ffs_func_unbind can proceed further. Following is the illustration: CPU1 CPU2 ffs_func_unbind() ffs_ep0_read() mutex_lock(ffs->mutex) wait_event(ffs->ev.count) functionfs_unbind() mutex_lock(ffs->mutex) mutex_unlock(ffs->mutex) ffs_event_add() <deadlock> Fix this by moving the event unbind before functionfs_unbind to ensure the ev.count is incrased properly. Fixes: 6a19da11 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait") Cc: stable <stable@kernel.org> Signed-off-by:
Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com> Link: https://lore.kernel.org/r/20230525092854.7992-1-quic_uaggarwa@quicinc.com Signed-off-by:
-
Sebastian Krzyszkowiak authored
commit 36936a56 upstream. BM818 is based on Qualcomm MDM9607 chipset. Fixes: 9a07406b ("net: usb: qmi_wwan: Add the BroadMobi BM818 card") Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230526-bm818-dtr-v1-1-64bbfa6ba8af@puri.sm Signed-off-by:
-
Lukas Bulwahn authored
commit a146eccb upstream. Commit 28d1a7ac ("iio: dac: Add AD5758 support") adds the config AD5758 and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver is however included when AD5755 is selected, not when AD5758 is selected. Probably, this was simply a mistake that happened by copy-and-paste and forgetting to adjust the actual line. Surprisingly, no one has ever noticed that this driver is actually only included when AD5755 is selected and that the config AD5758 has actually no effect on the build. Fixes: 28d1a7ac ("iio: dac: Add AD5758 support") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Marek Vasut authored
commit 09d3bec7 upstream. The i2c_master_send() returns number of sent bytes on success, or negative on error. The suspend/resume callbacks expect zero on success and non-zero on error. Adapt the return value of the i2c_master_send() to the expectation of the suspend and resume callbacks, including proper validation of the return value. Fixes: cf35ad61 ("iio: add mcp4725 I2C DAC driver") Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230511004330.206942-1-marex@denx.de Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Frank Li authored
commit a551c26e upstream. VCNL4035 register(0xE) ID_L and ID_M define as: ID_L: 0x80 ID_H: 7:6 (0:0) 5:4 (0:0) slave address = 0x60 (7-bit) (0:1) slave address = 0x51 (7-bit) (1:0) slave address = 0x40 (7-bit) (1:0) slave address = 0x41 (7-bit) 3:0 Version code default (0:0:0:0) So just check ID_L. Fixes: 55707294 ("iio: light: Add support for vishay vcnl4035") Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Nikita Zhandarovich authored
commit bd249b91 upstream. If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic operations and integer promotions are done, high bits in wacom->serial[idx] will be filled with 1s as well. Avoid this, albeit unlikely, issue by specifying left operand's __u64 type for the right operand. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3bea733a ("USB: wacom tablet driver reorganization") Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Cc: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Sung-Chi Li authored
commit ed84c451 upstream. Add 1 additional hammer-like device. Signed-off-by:
Sung-Chi Li <lschyi@chromium.org> Signed-off-by:
-
Jiakai Luo authored
commit 27b2ed5b upstream. Smatch reports: drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn: missing unwind goto? the order of three init operation: 1.mxs_lradc_adc_trigger_init 2.iio_triggered_buffer_setup 3.mxs_lradc_adc_hw_init thus, the order of three cleanup operation should be: 1.mxs_lradc_adc_hw_stop 2.iio_triggered_buffer_cleanup 3.mxs_lradc_adc_trigger_remove we exchange the order of two cleanup operations, introducing the following differences: 1.if mxs_lradc_adc_trigger_init fails, returns directly; 2.if trigger_init succeeds but iio_triggered_buffer_setup fails, goto err_trig and remove the trigger. In addition, we also reorder the unwind that goes on in the remove() callback to match the new ordering. Fixes: 6dd112b9 ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by:
Jiakai Luo <jkluo@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by:
-
