- Apr 03, 2014
-
-
Greg Kroah-Hartman authored
-
Daniel Borkmann authored
commit b22f5126 upstream. Some occurences in the netfilter tree use skb_header_pointer() in the following way ... struct dccp_hdr _dh, *dh; ... skb_header_pointer(skb, dataoff, sizeof(_dh), &dh); ... where dh itself is a pointer that is being passed as the copy buffer. Instead, we need to use &_dh as the forth argument so that we're copying the data into an actual buffer that sits on the stack. Currently, we probably could overwrite memory on the stack (e.g. with a possibly mal-formed DCCP packet), but unintentionally, as we only want the buffer to be placed into _dh variable. Fixes: 2bc78049 ("[NETFILTER]: nf_conntrack: add DCCP protocol support") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Li Zefan authored
commit 0ab02ca8 upstream. Setup cgroupfs like this: # mount -t cgroup -o cpuacct xxx /cgroup # mkdir /cgroup/sub1 # mkdir /cgroup/sub2 Then run these two commands: # for ((; ;)) { mkdir /cgroup/sub1/tmp && rmdir /mnt/sub1/tmp; } & # for ((; ;)) { mkdir /cgroup/sub2/tmp && rmdir /mnt/sub2/tmp; } & After seconds you may see this warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 25243 at lib/idr.c:527 sub_remove+0x87/0x1b0() idr_remove called for id=6 which is not allocated. ... Call Trace: [<ffffffff8156063c>] dump_stack+0x7a/0x96 [<ffffffff810591ac>] warn_slowpath_common+0x8c/0xc0 [<ffffffff81059296>] warn_slowpath_fmt+0x46/0x50 [<ffffffff81300aa7>] sub_remove+0x87/0x1b0 [<ffffffff810f3f02>] ? css_killed_work_fn+0x32/0x1b0 [<ffffffff81300bf5>] idr_remove+0x25/0xd0 [<ffffffff810f2bab>] cgroup_destroy_css_killed+0x5b/0xc0 [<ffffffff810f4000>] css_killed_work_fn+0x130/0x1b0 [<ffffffff8107cdbc>] process_one_work+0x26c/0x550 [<ffffffff8107eefe>] worker_thread+0x12e/0x3b0 [<ffffffff81085f96>] kthread+0xe6/0xf0 [<ffffffff81570bac>] ret_from_fork+0x7c/0xb0 ---[ end trace 2d1577ec10cf80d0 ]--- It's because allocating/removing cgroup ID is not properly synchronized. The bug was introduced when we converted cgroup_ida to cgroup_idr. While synchronization is already done inside ida_simple_{get,remove}(), users are responsible for concurrent calls to idr_{alloc,remove}(). tj: Refreshed on top of b58c8998 ("cgroup: fix error return from cgroup_create()"). [mhocko@suse.cz: ported to 3.12] Fixes: 4e96ee8e ("cgroup: convert cgroup_ida to cgroup_idr") Cc: <stable@vger.kernel.org> #3.12+ Reported-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
David Rientjes authored
commit 668f9abb upstream. Commit bf6bddf1 ("mm: introduce compaction and migration for ballooned pages") introduces page_count(page) into memory compaction which dereferences page->first_page if PageTail(page). This results in a very rare NULL pointer dereference on the aforementioned page_count(page). Indeed, anything that does compound_head(), including page_count() is susceptible to racing with prep_compound_page() and seeing a NULL or dangling page->first_page pointer. This patch uses Andrea's implementation of compound_trans_head() that deals with such a race and makes it the default compound_head() implementation. This includes a read memory barrier that ensures that if PageTail(head) is true that we return a head page that is neither NULL nor dangling. The patch then adds a store memory barrier to prep_compound_page() to ensure page->first_page is set. This is the safest way to ensure we see the head page that we are expecting, PageTail(page) is already in the unlikely() path and the memory barriers are unfortunately required. Hugetlbfs is the exception, we don't enforce a store memory barrier during init since no race is possible. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Holger Kiehl <Holger.Kiehl@dwd.de> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 38129a13 upstream. fixes RCU bug - walking through hlist is safe in face of element moves, since it's self-terminating. Cyclic lists are not - if we end up jumping to another hash chain, we'll loop infinitely without ever hitting the original list head. [fix for dumb braino folded] Spotted by: Max Kellermann <mk@cm4all.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 0b1b901b upstream. If the dest_mnt is not shared, propagate_mnt() does nothing - there's no mounts to propagate to and thus no copies to create. Might as well don't bother calling it in that case. Signed-off-by:
-
Al Viro authored
commit 1d6a32ac upstream. preparation to switching mnt_hash to hlist Signed-off-by:
-
Al Viro authored
commit 0818bf27 upstream. * switch allocation to alloc_large_system_hash() * make sizes overridable by boot parameters (mhash_entries=, mphash_entries=) * switch mountpoint_hashtable from list_head to hlist_head Signed-off-by:
-
Sasha Levin authored
commit 05efa8c9 upstream. Commit 4af712e8 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") has added a late reseed stage that happens as soon as the nonblocking pool is marked as initialized. This fails in the case that the nonblocking pool gets initialized during __prandom_reseed()'s call to get_random_bytes(). In that case we'd double back into __prandom_reseed() in an attempt to do a late reseed - deadlocking on 'lock' early on in the boot process. Instead, just avoid even waiting to do a reseed if a reseed is already occuring. Fixes: 4af712e8 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Thomas Petazzoni authored
commit e3a8786c upstream. Commit 5445eaf3 ('mvneta: Try to fix mvneta when compiled as module') fixed the mvneta driver to make it work properly when loaded as a module in SGMII configuration, which was tested successful by the author on the Armada XP OpenBlocks AX3, which uses SGMII. However, it turns out that the Armada XP GP, which uses RGMII, is affected by a similar problem: its SERDES configuration is lost when mvneta is loaded as a module, because this configuration is set by the bootloader, and then lost because the clock is gated by the clock framework until the mvneta driver is loaded again and the clock is re-enabled. However, it turns out that for the RGMII case, setting the SERDES configuration is not sufficient: the PCS enable bit in the MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII configuration. Therefore, this commit reworks the SGMII/RGMII initialization: the only difference between the two now is a different SERDES configuration, all the rest is identical. In detail, to achieve this, the commit: * Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is not specific to SGMII, but also used on RGMII configurations. * Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as the MVNETA_SERDES_CFG value in RGMII configurations. * Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config() functions, and instead directly do the SGMII/RGMII configuration in mvneta_port_up(), from where those functions where called. It is worth mentioning that mvneta_gmac_rgmii_set() had an 'enable' parameter that was always passed as '1', so it was pretty useless. * Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG register to the appropriate value depending on the RGMII vs. SGMII configuration. It also unconditionally set the PCS_ENABLE bit (was already done for SGMII, but is now also needed for RGMII), and sets the PORT_RGMII bit (which was already done for both SGMII and RGMII). This commit was successfully tested with mvneta compiled as a module, on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP (RGMII configuration). Reported-by:
Steve McIntyre <steve@einval.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
commit a79121d3 upstream. Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS, not the PSC: there was a typo in the name of the define, which this commit fixes. Signed-off-by:
-
Al Viro authored
commit e825196d upstream. In all callchains leading to prepend_name(), the value left in *buflen is eventually discarded unused if prepend_name() has returned a negative. So we are free to do what prepend() does, and subtract from *buflen *before* checking for underflow (which turns into checking the sign of subtraction result, of course). Signed-off-by:
-
Artem Fetishev authored
commit 825600c0 upstream. On x86 uniprocessor systems topology_physical_package_id() returns -1 which causes rapl_cpu_prepare() to leave rapl_pmu variable uninitialized which leads to GPF in rapl_pmu_init(). See arch/x86/kernel/cpu/perf_event_intel_rapl.c. It turns out that physical_package_id and core_id can actually be retreived for uniprocessor systems too. Enabling them also fixes rapl_pmu code. Signed-off-by:
Artem Fetishev <artem_fetishev@epam.com> Cc: Stephane Eranian <eranian@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Simona Vetter authored
commit 8ee661b5 upstream. It apparently blows up on some machines. This functionally reverts commit 828c7908 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64841 Reported-and-Tested-by:
Brad Jackson <bjackson0971@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Scott Wood authored
commit 5f12c5ec upstream. Fixes a build break due to the undeclared use of irq_of_parse_and_map() and of_iomap(). This build break was apparently introduced while the driver was unbuildable due to the bug fixed by 62c19c9d ("i2c: Remove usage of orphaned symbol OF_I2C"). When 62c19c was added in v3.14-rc7, the driver was enabled again, breaking the powerpc mpc85xx_defconfig and mpc85xx_smp_defconfig. 62c19c is marked for stable, so this should go there as well. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
David Vrabel authored
commit 5926f87f upstream. This reverts commit a9c8e4be . PTEs in Xen PV guests must contain machine addresses if _PAGE_PRESENT is set and pseudo-physical addresses is _PAGE_PRESENT is clear. This is because during a domain save/restore (migration) the page table entries are "canonicalised" and uncanonicalised". i.e., MFNs are converted to PFNs during domain save so that on a restore the page table entries may be rewritten with the new MFNs on the destination. This canonicalisation is only done for PTEs that are present. This change resulted in writing PTEs with MFNs if _PAGE_PROTNONE (or _PAGE_NUMA) was set but _PAGE_PRESENT was clear. These PTEs would be migrated as-is which would result in unexpected behaviour in the destination domain. Either a) the MFN would be translated to the wrong PFN/page; b) setting the _PAGE_PRESENT bit would clear the PTE because the MFN is no longer owned by the domain; or c) the present bit would not get set. Symptoms include "Bad page" reports when munmapping after migrating a domain. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Wei Liu authored
commit 09ed3d5b upstream. Xen balloon driver will update ballooned out pages' P2M entries to point to scratch page for PV guests. In 24f69373 ("xen/balloon: don't alloc page while non-preemptible", kmap_flush_unused was moved after updating P2M table. In that case for 32 bit PV guest we might end up with P2M X -----> S (S is mfn of balloon scratch page) M2P Y -----> X (Y is mfn in persistent kmap entry) kmap_flush_unused() iterates through all the PTEs in the kmap address space, using pte_to_page() to obtain the page. If the p2m and the m2p are inconsistent the incorrect page is returned. This will clear page->address on the wrong page which may cause subsequent oopses if that page is currently kmap'ed. Move the flush back between get_page and __set_phys_to_machine to fix this. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Hans de Goede authored
commit 6797b39e upstream. The cypress PS/2 trackpad models supported by the cypress_ps2 driver emulate BTN_RIGHT events in firmware based on the finger position, as part of this no motion events are sent when the finger is in the button area. The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that BTN_RIGHT events should be emulated in userspace, which is not necessary in this case. When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion event before propagating the button event higher up the stack, as it needs current abs x + y data for its BTN_RIGHT emulation. Since in the cypress_ps2 pads don't report motion events in the button area, this means that clicks in the button area end up being ignored, so INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and removing it fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76341 Reported-by:
Adam Williamson <awilliam@redhat.com> Tested-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 8a0435d9 upstream. This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Signed-off-by:
-
Benjamin Tissoires authored
commit 421e08c4 upstream. The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
commit e4dbedc7 upstream. We should not be using static variable mousedev_mix in methods that can be called before that singleton gets assigned. While at it let's add open and close methods to mousedev structure so that we do not need to test if we are dealing with multiplexor or normal device and simply call appropriate method directly. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551 Reported-by:
GiulioDP <depasquale.giulio@gmail.com> Tested-by:
-
Al Viro authored
commit b37199e6 upstream. We can get false negative from __lookup_mnt() if an unrelated vfsmount gets moved. In that case legitimize_mnt() is guaranteed to fail, and we will fall back to non-RCU walk... unless we end up running into a hard error on a filesystem object we wouldn't have reached if not for that false negative. IOW, delaying that check until the end of pathname resolution is wrong - we should recheck right after we attempt to cross the mountpoint. We don't need to recheck unless we see d_mountpoint() being true - in that case even if we have just raced with mount/umount, we can simply go on as if we'd come at the moment when the sucker wasn't a mountpoint; if we run into a hard error as the result, it was a legitimate outcome. __lookup_mnt() returning NULL is different in that respect, since it might've happened due to operation on completely unrelated mountpoint. Signed-off-by:
-
Theodore Ts'o authored
commit 00a1a053 upstream. Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time. Reported-by:
John Sullivan <jsrhbz@kanargh.force9.co.uk> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
- Mar 31, 2014
-
-
Greg Kroah-Hartman authored
-
Ilya Dryomov authored
commit f2be82b0 upstream. The check that makes sure that we have enough memory allocated to read in the entire header of the message in question is currently busted. It compares front_len of the incoming message with iov_len field of ceph_msg::front structure, which is used primarily to indicate the amount of data already read in, and not the size of the allocated buffer. Under certain conditions (e.g. a short read from a socket followed by that socket's shutdown and owning ceph_connection reset) this results in a warning similar to [85688.975866] libceph: get_reply front 198 > preallocated 122 (4#0) and, through another bug, leads to forever hung tasks and forced reboots. Fix this by comparing front_len with front_alloc_len field of struct ceph_msg, which stores the actual size of the buffer. Fixes: http://tracker.ceph.com/issues/5425 Signed-off-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Ilya Dryomov authored
commit 3f0a4ac5 upstream. Rename front local variable to front_len in get_reply() to make its purpose more clear. Signed-off-by:
-
Ilya Dryomov authored
commit 3cea4c30 upstream. Rename front_max field of struct ceph_msg to front_alloc_len to make its purpose more clear. Signed-off-by:
-
Michele Baldessari authored
commit 2b6e0ca1 upstream. In https://bugzilla.redhat.com/show_bug.cgi?id=994438 and https://bugzilla.redhat.com/show_bug.cgi?id=970480 we received different reports of e100 throwing the following warning: [<c06a0ba5>] ? pci_disable_device+0x85/0x90 [<c044a153>] warn_slowpath_fmt+0x33/0x40 [<c06a0ba5>] pci_disable_device+0x85/0x90 [<f7fdf7e0>] __e100_shutdown+0x80/0x120 [e100] [<c0476ca5>] ? check_preempt_curr+0x65/0x90 [<f7fdf8d6>] e100_suspend+0x16/0x30 [e100] [<c06a1ebb>] pci_legacy_suspend+0x2b/0xb0 [<c098fc0f>] ? wait_for_completion+0x1f/0xd0 [<c06a2d50>] ? pci_pm_poweroff+0xb0/0xb0 [<c06a2de4>] pci_pm_freeze+0x94/0xa0 [<c0767bb7>] dpm_run_callback+0x37/0x80 [<c076a204>] ? pm_wakeup_pending+0xc4/0x140 [<c0767f12>] __device_suspend+0xb2/0x1f0 [<c076806f>] async_suspend+0x1f/0x90 [<c04706e5>] async_run_entry_fn+0x35/0x140 [<c0478aef>] ? wake_up_process+0x1f/0x40 [<c0464495>] process_one_work+0x115/0x370 [<c0462645>] ? start_worker+0x25/0x30 [<c0464dc5>] ? manage_workers.isra.27+0x1a5/0x250 [<c0464f6e>] worker_thread+0xfe/0x330 [<c0464e70>] ? manage_workers.isra.27+0x250/0x250 [<c046a224>] kthread+0x94/0xa0 [<c0997f37>] ret_from_kernel_thread+0x1b/0x28 [<c046a190>] ? insert_kthread_work+0x30/0x30 This patch removes pci_disable_device() from __e100_shutdown(). pci_clear_master() is enough. Signed-off-by:
Michele Baldessari <michele@acksyn.org> Tested-by:
Mark Harig <idirectscm@aim.com> Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Sarah Sharp authored
commit 1aa9578c upstream. Don Zickus <dzickus@redhat.com> writes: Some co-workers of mine bought Samsung laptops that had mostly usb3 ports. Those ports did not resume correctly (the driver would timeout communicating and fail). This led to frustration as suspend/resume is a common use for laptops. Poking around, I applied the reset on resume quirk to this chipset and the resume started working. Reloading the xhci_hcd module had been the temporary workaround. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by:
Don Zickus <dzickus@redhat.com> Tested-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
Ping Cheng authored
commit 961794a0 upstream. New Intuos series models added a hardware switch to turn touch data on/off. The state of the switch is reported periodically from the tablet. To report the state the driver will emit SW_MUTE_DEVICE events. Reviewed_by: Chris Bagwell <chris@cnpbagwell.com> Acked-by:
Jason Gerecke <killertofu@gmail.com> Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Ping Cheng authored
commit b5fd2a3e upstream. Two tablets in this series support both pen and touch. One (Intuos S) only supports pen. This patch also updates the driver to process wireless devices that do not support touch interface. Tested-by:
Chris Bagwell <chris@cnpbagwell.com> Signed-off-by:
-
Ping Cheng authored
commit 1d0d6df0 upstream. Old single touch Tablet PCs do not have touch_max set at wacom_features. Since touch device at lease supports one finger, assign touch_max to 1 when touch usage is defined in its HID Descriptor and touch_max is not pre-defined. Tested-by:
-
Marcelo Tosatti authored
commit 26a865f4 upstream. After free_loaded_vmcs executes, the "loaded_vmcs" structure is kfreed, and now vmx->loaded_vmcs points to a kfreed area. Subsequent free_loaded_vmcs then attempts to manipulate vmx->loaded_vmcs. Switch the order to avoid the problem. https://bugzilla.redhat.com/show_bug.cgi?id=1047892 Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Marcelo Tosatti authored
commit 37f6a4e2 upstream. Rom Freiman <rom@stratoscale.com> notes other code paths vulnerable to bug fixed by 989c6b34 . Signed-off-by:
-
Marcelo Tosatti authored
commit 989c6b34 upstream. It is possible for __direct_map to be called on invalid root_hpa (-1), two examples: 1) try_async_pf -> can_do_async_pf -> vmx_interrupt_allowed -> nested_vmx_vmexit 2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit Then to load_vmcs12_host_state and kvm_mmu_reset_context. Check for this possibility, let fault exception be regenerated. BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916 Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Hans de Goede authored
commit c15bdfd5 upstream. The current assumption in the elantech driver that hw version 3 touchpads are never clickpads and hw version 4 touchpads are always clickpads is wrong. There are several bug reports for this, ie: https://bugzilla.redhat.com/show_bug.cgi?id=1030802 http://superuser.com/questions/619582/right-elantech-touchpad-button-not-working-in-linux I've spend a couple of hours wading through various bugzillas, launchpads and forum posts to create a list of fw-versions and capabilities for different laptop models to find a good method to differentiate between clickpads and versions with separate hardware buttons. Which shows that a device being a clickpad is reliable indicated by bit 12 being set in the fw_version. I've included the gathered list inside the driver, so that we've this info at hand if we need to revisit this later. Signed-off-by:
-
Dave Jones authored
commit c1d867a5 upstream. Distribution kernels might want to build in support for /proc/device-tree for kernels that might end up running on hardware that doesn't support openfirmware. This results in an empty /proc/device-tree existing. Remove it if the OFW root node doesn't exist. This situation actually confuses grub2, resulting in install failures. grub2 sees the /proc/device-tree and picks the wrong install target cf. http://bzr.savannah.gnu.org/lh/grub/trunk/grub/annotate/4300/util/grub-install.in#L311 grub should be more robust, but still, leaving an empty proc dir seems pointless. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=818378 . Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Gavin Shan authored
commit af87d2fe upstream. As Ben suggested, the patch prints PHB diag-data with multiple fields in one line and omits the line if the fields of that line are all zero. With the patch applied, the PHB3 diag-data dump looks like: PHB3 PHB#3 Diag-data (Version: 1) brdgCtl: 00000002 RootSts: 0000000f 00400000 b0830008 00100147 00002000 nFir: 0000000000000000 0030006e00000000 0000000000000000 PhbSts: 0000001c00000000 0000000000000000 Lem: 0000000000100000 42498e327f502eae 0000000000000000 InAErr: 8000000000000000 8000000000000000 0402030000000000 0000000000000000 PE[ 8] A/B: 8480002b00000000 8000000000000000 [ The current diag data is so big that it overflows the printk buffer pretty quickly in cases when we get a handful of errors at once which can happen. --BenH ] Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Gavin Shan authored
commit 94716604 upstream. The PHB diag-data is important to help locating the root cause for EEH errors such as frozen PE or fenced PHB. However, the EEH core enables IO path by clearing part of HW registers before collecting this data causing it to be corrupted. This patch fixes this by dumping the PHB diag-data immediately when frozen/fenced state on PE or PHB is detected for the first time in eeh_ops::get_state() or next_error() backend. Signed-off-by:
-
Gavin Shan authored
commit 7e4e7867 upstream. For one PCI error relevant OPAL event, we possibly have multiple EEH errors for that. For example, multiple frozen PEs detected on different PHBs. Unfortunately, we didn't cover the case. The patch enumarates the return value from eeh_ops::next_error() and change eeh_handle_special_event() and eeh_ops::next_error() to handle all existing EEH errors. As Ben pointed out, we needn't list_for_each_entry_safe() since we are not deleting any PHB from the hose_list and the EEH serialized lock should be held while purging EEH events. The patch covers those suggestions as well. Signed-off-by:
-
