Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

When compiling a kernel without CONFIG_MULTI_CACHE enabled the
dma access functions end up not being exported. Fix it.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

I have encountered the same issue(s) on A6A boards.

I couldn't find a patch,  so I wrote this patch to update the device tree
in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I
would welcome any input on a different approach.

https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ



Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

There are 2 MACIDs stored in the control module of the am33xx. These are
read by the cpsw driver if no valid MACID was found in the devicetree.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Tony Lindgren <tony@atomide.com>

This patch adds a function to get the MACIDs from the am33xx SoC
control module registers which hold unique vendor MACIDs. This is only
used if of_get_mac_address() fails to get a valid mac address.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Steven Rostedt <rostedt@goodmis.org>

Use dev_err instead of pr_err.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>

"MII_BUS_ID_SIZE" is defined in linux/phy.h which is not included in the
cpsw.h file.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>

ret is set 0 at this point, so jumping to that error label would result
in a return value of 0. Set ret to -ENOMEM to return a proper error
value.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>

mac-address is an optional property. If no mac-address is set, a random
mac-address will be generated.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Rewritten using includes, v3.16.1

Signed-off-by: Dave Lambert <dave@lambsys.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Fix system power off control of rtc node on ported to 3.14 kernel,
which should be placed under ocp node to match am33xx.dtsi.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Beaglebone white and beaglebone black differ in tiny little aspects.
This is the reason why we maintain seperate dts for these platforms.
However, there is no real way to decode from dtb which platform it is
since compatible and model name are the same for both platforms.

Fix this so that beaglebone black and beaglebone are identifiable,
while maintaining compatibility for older zImages which might use old
beaglebone compatible flag for black as well.

Reported-by: Tom Rini <trini@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

https://groups.google.com/d/msg/beagleboard/634Xm1m3XA8/B028x1FzAyAJ



Reported-by: Mark A. Yoder <mark.a.yoder@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

temp: panels disable hdmi pins (need to rewrite against Charles patch, but this will keep things working till i get back from san jose)

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

BeagleBone DTS : Enable run-time pinmux for HDMI Add cape-universal-hdmi pin
info to am335x-bone-common-pinmux.dtsi Edit hdmi dtsi include files to use
new mode= setting to set HDMI mode at startup, leaving  pinmux configurable
at runtime.

Signed-off-by: Charles Steinkuehler <charles@steinkuehler.net>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>