- Aug 03, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220801114138.041018499@linuxfoundation.org Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Ronald Warsow <rwarsow@gmx.de> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Zan Aziz <zanaziz313@gmail.com> Tested-by:
Ron Economos <re@w6rz.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Justin M. Forbes <jforbes@fedoraproject.org> Tested-by:
Bagas Sanjaya <bagasdotme@gmail.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thadeu Lima de Souza Cascardo authored
commit 571c30b1 upstream. Some cloud hypervisors do not provide IBPB on very recent CPU processors, including AMD processors affected by Retbleed. Using IBPB before firmware calls on such systems would cause a GPF at boot like the one below. Do not enable such calls when IBPB support is not present. EFI Variables Facility v0.08 2004-May-17 general protection fault, maybe for address 0x1: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 24 Comm: kworker/u2:1 Not tainted 5.19.0-rc8+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: efi_rts_wq efi_call_rts RIP: 0010:efi_call_rts Code: e8 37 33 58 ff 41 bf 48 00 00 00 49 89 c0 44 89 f9 48 83 c8 01 4c 89 c2 48 c1 ea 20 66 90 b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 e8 7b 9f 5d ff e8 f6 f8 ff ff 4c 89 f1 4c 89 ea 4c 89 e6 48 RSP: 0018:ffffb373800d7e38 EFLAGS: 00010246 RAX: 0000000000000001 RBX: 0000000000000006 RCX: 0000000000000049 RDX: 0000000000000000 RSI: ffff94fbc19d8fe0 RDI: ffff94fbc1b2b300 RBP: ffffb373800d7e70 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000b R11: 000000000000000b R12: ffffb3738001fd78 R13: ffff94fbc2fcfc00 R14: ffffb3738001fd80 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff94fc3da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff94fc30201000 CR3: 000000006f610000 CR4: 00000000000406f0 Call Trace: <TASK> ? __wake_up process_one_work worker_thread ? rescuer_thread kthread ? kthread_complete_and_exit ret_from_fork </TASK> Modules linked in: Fixes: 28a99e95 ("x86/amd: Use IBPB for firmware calls") Reported-by:
Dimitri John Ledkov <dimitri.ledkov@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220728122602.2500509-1-cascardo@canonical.com Signed-off-by:
-
Waiman Long authored
commit 6eebd5fb upstream. With commit d257cc8c ("locking/rwsem: Make handoff bit handling more consistent"), the writer that sets the handoff bit can be interrupted out without clearing the bit if the wait queue isn't empty. This disables reader and writer optimistic lock spinning and stealing. Now if a non-first writer in the queue is somehow woken up or a new waiter enters the slowpath, it can't acquire the lock. This is not the case before commit d257cc8c as the writer that set the handoff bit will clear it when exiting out via the out_nolock path. This is less efficient as the busy rwsem stays in an unlock state for a longer time. In some cases, this new behavior may cause lockups as shown in [1] and [2]. This patch allows a non-first writer to ignore the handoff bit if it is not originally set or initiated by the first waiter. This patch is shown to be effective in fixing the lockup problem reported in [1]. [1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/ [2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/ Fixes: d257cc8c ("locking/rwsem: Make handoff bit handling more consistent") Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
John Donnelly <john.p.donnelly@oracle.com> Tested-by:
Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com Signed-off-by:
-
Eiichi Tsukata authored
commit ea304a8b upstream. Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt" with the respective retbleed= settings. Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
-
Sherry Sun authored
commit 4bcffe94 upstream. zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after an interrupt for a {un-,}correctable error is raised, which disables the error interrupts. Then the interrupt handler will be called only once. Therefore, re-enable the error interrupt line at the end of intr_handler() for v3.x Synopsys EDAC DDR. Fixes: f7824ded ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Signed-off-by:
Shubhrajyoti Datta <Shubhrajyoti.datta@xilinx.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com Signed-off-by:
-
Sherry Sun authored
commit be76ceaf upstream. v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the ECC Clear Register to disable the error interrupts instead. Fixes: f7824ded ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by:
-
Toshi Kani authored
commit 5e2805d5 upstream. The commit cb51a371 ("EDAC/ghes: Setup DIMM label from DMI and use it in error reports") enforced that both the bank and device strings passed to dimm_setup_label() are not NULL. However, there are BIOSes, for example on a HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019 which don't populate both strings: Handle 0x0020, DMI type 17, 84 bytes Memory Device Array Handle: 0x0013 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 32 GB Form Factor: DIMM Set: None Locator: PROC 1 DIMM 1 <===== device Bank Locator: Not Specified <===== bank This results in a buffer overflow because ghes_edac_register() calls strlen() on an uninitialized label, which had non-zero values left over from krealloc_array(): detected buffer overflow in __fortify_strlen ------------[ cut here ]------------ kernel BUG at lib/string_helpers.c:983! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Tainted: G I 5.18.6-200.fc36.x86_64 #1 Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 03/15/2019 RIP: 0010:fortify_panic ... Call Trace: <TASK> ghes_edac_register.cold ghes_probe platform_probe really_probe __driver_probe_device driver_probe_device __driver_attach ? __device_attach_driver bus_for_each_dev bus_add_driver driver_register acpi_ghes_init acpi_init ? acpi_sleep_proc_init do_one_initcall The label contains garbage because the commit in Fixes reallocs the DIMMs array while scanning the system but doesn't clear the newly allocated memory. Change dimm_setup_label() to always initialize the label to fix the issue. Set it to the empty string in case BIOS does not provide both bank and device so that ghes_edac_register() can keep the default label given by edac_mc_alloc_dimms(). [ bp: Rewrite commit message. ] Fixes: b9cae277 ("EDAC/ghes: Scan the system once on driver init") Co-developed-by:
Robert Richter <rric@kernel.org> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Robert Elliott <elliott@hpe.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220719220124.760359-1-toshi.kani@hpe.com Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit fb0fd346 ] Commit 26f09e9b ("mm/memblock: add memblock memory allocation apis") added a check to determine whether arm_dma_zone_size is exceeding the amount of kernel virtual address space available between the upper 4GB virtual address limit and PAGE_OFFSET in order to provide a suitable definition of MAX_DMA_ADDRESS that should fit within the 32-bit virtual address space. The quantity used for comparison was off by a missing trailing 0, leading to MAX_DMA_ADDRESS to be overflowing a 32-bit quantity. This was caught thanks to CONFIG_DEBUG_VIRTUAL on the bcm2711 platform where we define a dma_zone_size of 1GB and we have a PAGE_OFFSET value of 0xc000_0000 (CONFIG_VMSPLIT_3G) leading to MAX_DMA_ADDRESS being 0x1_0000_0000 which overflows the unsigned long type used throughout __pa() and then __virt_addr_valid(). Because the virtual address passed to __virt_addr_valid() would now be 0, the function would loudly warn and flood the kernel log, thus making the platform unable to boot properly. Fixes: 26f09e9b ("mm/memblock: add memblock memory allocation apis") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kuniyuki Iwashima authored
[ Upstream commit 0f1e4d06 ] While reading sysctl_tcp_workaround_signed_windows, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 15d99e02 ("[TCP]: sysctl to allow TCP window > 32767 sans wscale") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jaewon Kim authored
commit 9282012f upstream. There was a report that a task is waiting at the throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was increasing. This is a bug where zone_watermark_fast returns true even when the free is very low. The commit f27ce0e1 ("page_alloc: consider highatomic reserve in watermark fast") changed the watermark fast to consider highatomic reserve. But it did not handle a negative value case which can be happened when reserved_highatomic pageblock is bigger than the actual free. If watermark is considered as ok for the negative value, allocating contexts for order-0 will consume all free pages without direct reclaim, and finally free page may become depleted except highatomic free. Then allocating contexts may fall into throttle_direct_reclaim. This symptom may easily happen in a system where wmark min is low and other reclaimers like kswapd does not make free pages quickly. Handle the negative case by using MIN. Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com Fixes: f27ce0e1 ("page_alloc: consider highatomic reserve in watermark fast") Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Reported-by:
GyeongHwan Hong <gh21.hong@samsung.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ralph Campbell authored
commit 8a295dbb upstream. If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a device private PTE is found, the hmm_range::dev_private_owner page is used to determine if the device private page should not be faulted in. However, if the device private page is not owned by the caller, hmm_range_fault() returns an error instead of calling migrate_to_ram() to fault in the page. For example, if a page is migrated to GPU private memory and a RDMA fault capable NIC tries to read the migrated page, without this patch it will get an error. With this patch, the page will be migrated back to system memory and the NIC will be able to read the data. Link: https://lkml.kernel.org/r/20220727000837.4128709-2-rcampbell@nvidia.com Link: https://lkml.kernel.org/r/20220725183615.4118795-2-rcampbell@nvidia.com Fixes: 08ddddda ("mm/hmm: check the device private page owner in hmm_range_fault()") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Reported-by:
Felix Kuehling <felix.kuehling@amd.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 4d3d3a1b ] If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt() before returning. Otherwise it is a resource leak. Fixes: fa4b3ca6 ("stmmac: dwmac-mediatek: fix clock issue") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Dimitris Michailidis authored
[ Upstream commit 51a83391 ] The current implementation of fun_xdp_tx(), used for XPD_TX, is incorrect in that it takes an address/length pair and later releases it with page_frag_free(). It is OK for XDP_TX but the same code is used by ndo_xdp_xmit. In that case it loses the XDP memory type and releases the packet incorrectly for some of the types. Assorted breakage follows. Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in reclaim. Fixes: db37bc17 ("net/funeth: add the data path") Signed-off-by:
Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 181d8d20 ] A NULL pointer dereference was reported by Wei Chen: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:__list_del_entry_valid+0x26/0x80 Call Trace: <TASK> sctp_sched_dequeue_common+0x1c/0x90 sctp_sched_prio_dequeue+0x67/0x80 __sctp_outq_teardown+0x299/0x380 sctp_outq_free+0x15/0x20 sctp_association_free+0xc3/0x440 sctp_do_sm+0x1ca7/0x2210 sctp_assoc_bh_rcv+0x1f6/0x340 This happens when calling sctp_sendmsg without connecting to server first. In this case, a data chunk already queues up in send queue of client side when processing the INIT_ACK from server in sctp_process_init() where it calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in all stream_out will be freed in sctp_stream_init's err path. Then in the asoc freeing it will crash when dequeuing this data chunk as stream_out is missing. As we can't free stream out before dequeuing all data from send queue, and this patch is to fix it by moving the err path stream_out/in freeing in sctp_stream_init() to sctp_stream_free() which is eventually called when freeing the asoc in sctp_association_free(). This fix also makes the code in sctp_process_init() more clear. Note that in sctp_association_init() when it fails in sctp_stream_init(), sctp_association_free() will not be called, and in that case it should go to 'stream_free' err path to free stream instead of 'fail_init'. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by:
Wei Chen <harperchen1110@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com Signed-off-by:
-
Alejandro Lucero authored
[ Upstream commit 67c3b611 ] Sending a PTP packet can imply to use the normal TX driver datapath but invoked from the driver's ptp worker. The kernel generic TX code disables softirqs and preemption before calling specific driver TX code, but the ptp worker does not. Although current ptp driver functionality does not require it, there are several reasons for doing so: 1) The invoked code is always executed with softirqs disabled for non PTP packets. 2) Better if a ptp packet transmission is not interrupted by softirq handling which could lead to high latencies. 3) netdev_xmit_more used by the TX code requires preemption to be disabled. Indeed a solution for dealing with kernel preemption state based on static kernel configuration is not possible since the introduction of dynamic preemption level configuration at boot time using the static calls functionality. Fixes: f79c957a ("drivers: net: sfc: use netdev_xmit_more helper") Signed-off-by:
Alejandro Lucero <alejandro.lucero-palau@amd.com> Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com Signed-off-by:
-
Leo Yan authored
[ Upstream commit 2d86612a ] When using 'perf mem' and 'perf c2c', an issue is observed that tool reports the wrong offset for global data symbols. This is a common issue on both x86 and Arm64 platforms. Let's see an example, for a test program, below is the disassembly for its .bss section which is dumped with objdump: ... Disassembly of section .bss: 0000000000004040 <completed.0>: ... 0000000000004080 <buf1>: ... 00000000000040c0 <buf2>: ... 0000000000004100 <thread>: ... First we used 'perf mem record' to run the test program and then used 'perf --debug verbose=4 mem report' to observe what's the symbol info for 'buf1' and 'buf2' structures. # ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8 # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf2 0x30a8-0x30e8 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028 symbol__new: buf1 0x3068-0x30a8 ... The perf tool relies on libelf to parse symbols, in executable and shared object files, 'st_value' holds a virtual address; 'sh_addr' is the address at which section's first byte should reside in memory, and 'sh_offset' is the byte offset from the beginning of the file to the first byte in the section. The perf tool uses below formula to convert a symbol's memory address to a file address: file_address = st_value - sh_addr + sh_offset ^ ` Memory address We can see the final adjusted address ranges for buf1 and buf2 are [0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is incorrect, in the code, the structure for 'buf1' and 'buf2' specifies compiler attribute with 64-byte alignment. The problem happens for 'sh_offset', libelf returns it as 0x3028 which is not 64-byte aligned, combining with disassembly, it's likely libelf doesn't respect the alignment for .bss section, therefore, it doesn't return the aligned value for 'sh_offset'. Suggested by Fangrui Song, ELF file contains program header which contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD segments contain the execution info. A better choice for converting memory address to file address is using the formula: file_address = st_value - p_vaddr + p_offset This patch introduces elf_read_program_header() which returns the program header based on the passed 'st_value', then it uses the formula above to calculate the symbol file address; and the debugging log is updated respectively. After applying the change: # ./perf --debug verbose=4 mem report ... dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf2 0x30c0-0x3100 ... dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28 symbol__new: buf1 0x3080-0x30c0 ... Fixes: f17e04af ("perf report: Fix ELF symbol parsing") Reported-by:
Chang Rui <changruinj@gmail.com> Suggested-by:
Fangrui Song <maskray@google.com> Signed-off-by:
Leo Yan <leo.yan@linaro.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 5a159128 ] We try using cancel_delayed_work_sync() to prevent the work from enabling NAPI. This is insufficient since we don't disable the source of the refill work scheduling. This means an NAPI poll callback after cancel_delayed_work_sync() can schedule the refill work then can re-enable the NAPI that leads to use-after-free [1]. Since the work can enable NAPI, we can't simply disable NAPI before calling cancel_delayed_work_sync(). So fix this by introducing a dedicated boolean to control whether or not the work could be scheduled from NAPI. [1] ================================================================== BUG: KASAN: use-after-free in refill_work+0x43/0xd4 Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42 CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events refill_work Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0xbb/0x6ac ? _printk+0xad/0xde ? refill_work+0x43/0xd4 kasan_report+0xa8/0x130 ? refill_work+0x43/0xd4 refill_work+0x43/0xd4 process_one_work+0x43d/0x780 worker_thread+0x2a0/0x6f0 ? process_one_work+0x780/0x780 kthread+0x167/0x1a0 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> ... Fixes: b2baed69 ("virtio_net: set/cancel work on ndo_open/ndo_stop") Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit f5c2976e ] If a device management command completion happens after wait_for_completion_timeout() times out and before ufshcd_clear_cmds() is called, then the completion code may crash on the complete() call in __ufshcd_transfer_req_compl(). Fix the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x64/0x178 __ufshcd_transfer_req_compl+0x30c/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 efi_header_end+0x110/0x680 __irq_exit_rcu+0x108/0x124 __handle_domain_irq+0x118/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220720170228.1598842-1-bvanassche@acm.org Fixes: 5a0b0cb9 ("[SCSI] ufs: Add support for sending NOP OUT UPIU") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit d1a76446 ] Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 99a63d36 ] Domingo Dirutigliano and Nicola Guerrera report kernel panic when sending nf_queue verdict with 1-byte nfta_payload attribute. The IP/IPv6 stack pulls the IP(v6) header from the packet after the input hook. If user truncates the packet below the header size, this skb_pull() will result in a malformed skb (skb->len < 0). Fixes: 7af4cc3f ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink") Reported-by:
Domingo Dirutigliano <pwnzer0tt1@proton.me> Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Sunil Goutham authored
[ Upstream commit b354eaee ] NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Duoming Zhou authored
[ Upstream commit b89fc26f ] There are sleep in atomic context bugs in timer handlers of sctp such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(), sctp_generate_t1_init_event(), sctp_generate_timeout_event(), sctp_generate_t3_rtx_event() and so on. The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter that may sleep could be called by different timer handlers which is in interrupt context. One of the call paths that could trigger bug is shown below: (interrupt context) sctp_generate_probe_event sctp_do_sm sctp_side_effects sctp_cmd_interpreter sctp_outq_teardown sctp_outq_init sctp_sched_set_sched n->init_sid(..,GFP_KERNEL) sctp_sched_prio_init_sid //may sleep This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched() from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic context bugs. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit c7560d12 ] Due to an invalid conflict resolution on my side while working on 2 different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add() does not store the database associated with a dsa_mac_addr structure. So after adding an FDB entry associated with a LAG, dsa_mac_addr_find() fails to find it while deleting it, because &a->db is zeroized memory for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del() returns -ENOENT rather than deleting the entry. Fixes: c2693363 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com Signed-off-by:
-
Michal Maloszewski authored
[ Upstream commit 5fcbb711 ] Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8 ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by:
Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by:
Michal Maloszewski <michal.maloszewski@intel.com> Tested-by:
Dave Switzer <david.switzer@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 96b9bd8c ] While reading sysctl_fib_notify_on_flag_change, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 680aea08 ("net: ipv4: Emit notification when fib hardware flags are changed") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 870e3a63 ] While reading sysctl_tcp_reflect_tos, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ac8f1710 ("tcp: reflect tos value received in SYN to the socket") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 79f55473 ] While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 9c21d2fc ("tcp: add tcp_comp_sack_nr sysctl") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 22396941 ] While reading sysctl_tcp_comp_sack_slack_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: a70437cc ("tcp: add hrtimer slack to sack compression") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 4866b2b0 ] While reading sysctl_tcp_comp_sack_delay_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6d82aa24 ("tcp: add tcp_comp_sack_delay_ns sysctl") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 02739545 ] While reading these sysctl variables, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - .sysctl_rmem - .sysctl_rwmem - .sysctl_rmem_offset - .sysctl_wmem_offset - sysctl_tcp_rmem[1, 2] - sysctl_tcp_wmem[1, 2] - sysctl_decnet_rmem[1] - sysctl_decnet_wmem[1] - sysctl_tipc_rmem[1] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 59bf6c65 ] While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 43e122b0 ("tcp: refine pacing rate determination") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 3e7d18b9 ] mld_{query | report}_work() processes queued events. If there are too many events in the queue, it re-queue a work. And then, it returns without in6_dev_put(). But if queuing is failed, it should call in6_dev_put(), but it doesn't. So, a reference count leak would occur. THREAD0 THREAD1 mld_report_work() spin_lock_bh() if (!mod_delayed_work()) in6_dev_hold(); spin_unlock_bh() spin_lock_bh() schedule_delayed_work() spin_unlock_bh() Script to reproduce(by Hangbin Liu): ip netns add ns1 ip netns add ns2 ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip -n ns1 link add veth0 type veth peer name veth0 netns ns2 ip -n ns1 link set veth0 up ip -n ns2 link set veth0 up for i in `seq 50`; do for j in `seq 100`; do ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0 ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0 done done modprobe -r veth ip -a netns del splat looks like: unregister_netdevice: waiting for veth0 to become free. Usage count = 2 leaked reference. ipv6_add_dev+0x324/0xec0 addrconf_notify+0x481/0xd10 raw_notifier_call_chain+0xe3/0x120 call_netdevice_notifiers+0x106/0x160 register_netdevice+0x114c/0x16b0 veth_newlink+0x48b/0xa50 [veth] rtnl_newlink+0x11a2/0x1a40 rtnetlink_rcv_msg+0x63f/0xc00 netlink_rcv_skb+0x1df/0x3e0 netlink_unicast+0x5de/0x850 netlink_sendmsg+0x6c9/0xa90 ____sys_sendmsg+0x76a/0x780 __sys_sendmsg+0x27c/0x340 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Tested-by:
Hangbin Liu <liuhangbin@gmail.com> Fixes: f185de28 ("mld: add new workqueues for process mld events") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jianglei Nie authored
[ Upstream commit c7b205fb ] init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by:
Jianglei Nie <niejianglei2021@163.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit c630d1fe ] Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit b07a0e20 ] IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 3240eac4 ] The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit f46040ee ] Commit 48ef50fa added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by:
Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit aa709da0 ] Since commit 1033990a ("sctp: implement memory accounting on tx path"), SCTP has supported memory accounting on tx path where 'sctp_wmem' is used by sk_wmem_schedule(). So we should fix the description for this option in ip-sysctl.rst accordingly. v1->v2: - Improve the description as Marcelo suggested. Fixes: 1033990a ("sctp: implement memory accounting on tx path") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 2afdbe7b ] While reading sysctl_tcp_invalid_ratelimit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 032ee423 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks") Signed-off-by:
-
Kuniyuki Iwashima authored
[ Upstream commit 85225e6f ] While reading sysctl_tcp_autocorking, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: f54b3111 ("tcp: auto corking") Signed-off-by:
-
