- Sep 14, 2012
-
-
Greg Kroah-Hartman authored
-
Luca Tettamanti authored
commit 43ca6cb2 upstream. The old interface is bugged and reads the wrong sensor when retrieving the reading for the chassis fan (it reads the CPU sensor); the new interface works fine. Reported-by:
Göran Uddeborg <goeran@uddeborg.se> Tested-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Krause authored
commit 276bdb82 upstream. ccid_hc_rx_getsockopt() and ccid_hc_tx_getsockopt() might be called with a NULL ccid pointer leading to a NULL pointer dereference. This could lead to a privilege escalation if the attacker is able to map page 0 and prepare it with a fake ccid_ops pointer. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andreas Herrmann authored
commit 36bf50d7 upstream. This issue was recently observed on an AMD C-50 CPU where a patch of maximum size was applied. Commit be62adb4 ("x86, microcode, AMD: Simplify ucode verification") added current_size in get_matching_microcode(). This is calculated as size of the ucode patch + 8 (ie. size of the header). Later this is compared against the maximum possible ucode patch size for a CPU family. And of course this fails if the patch has already maximum size. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Oleg Nesterov authored
commit c7a3a88c upstream. This patch fixes: https://bugzilla.redhat.com/show_bug.cgi?id=843640 If mmap_region()->uprobe_mmap() fails, unmap_and_free_vma path does unmap_region() but does not remove the soon-to-be-freed vma from rb tree. Actually there are more problems but this is how William noticed this bug. Perhaps we could do do_munmap() + return in this case, but in fact it is simply wrong to abort if uprobe_mmap() fails. Until at least we move the !UPROBE_COPY_INSN code from install_breakpoint() to uprobe_register(). For example, uprobe_mmap()->install_breakpoint() can fail if the probed insn is not supported (remember, uprobe_register() succeeds if nobody mmaps inode/offset), mmap() should not fail in this case. dup_mmap()->uprobe_mmap() is wrong too by the same reason, fork() can race with uprobe_register() and fail for no reason if it wins the race and does install_breakpoint() first. And, if nothing else, both mmap_region() and dup_mmap() return success if uprobe_mmap() fails. Change them to ignore the error code from uprobe_mmap(). Reported-and-tested-by:
William Cohen <wcohen@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: William Cohen <wcohen@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120819171042.GB26957@redhat.com Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 80ba77df upstream. When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by:
Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by:
Tobias Geiger <tobias.geiger@vido.info> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 50e90041 upstream. We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES inclusive) when trying to figure out whether we can re-use some of the P2M middle leafs. Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512 we would try to use the 512th entry. Fortunately for us the p2m_top_index has a check for this: BUG_ON(pfn >= MAX_P2M_PFN); which we hit and saw this: (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1.2-OVM x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff819cadeb>] (XEN) RFLAGS: 0000000000000212 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81db5000 rbx: ffffffff81db4000 rcx: 0000000000000000 (XEN) rdx: 0000000000480211 rsi: 0000000000000000 rdi: ffffffff81db4000 (XEN) rbp: ffffffff81793db8 rsp: ffffffff81793d38 r8: 0000000008000000 (XEN) r9: 4000000000000000 r10: 0000000000000000 r11: ffffffff81db7000 (XEN) r12: 0000000000000ff8 r13: ffffffff81df1ff8 r14: ffffffff81db6000 (XEN) r15: 0000000000000ff8 cr0: 000000008005003b cr4: 00000000000026f0 (XEN) cr3: 0000000661795000 cr2: 0000000000000000 Fixes-Oracle-Bug: 14570662 Signed-off-by:
-
Ronny Hegewald authored
commit b5031ed1 upstream. When running 32-bit pvops-dom0 and a driver tries to allocate a coherent DMA-memory the xen swiotlb-implementation returned memory beyond 4GB. The underlaying reason is that if the supplied driver passes in a DMA_BIT_MASK(64) ( hwdev->coherent_dma_mask is set to 0xffffffffffffffff) our dma_mask will be u64 set to 0xffffffffffffffff even if we set it to DMA_BIT_MASK(32) previously. Meaning we do not reset the upper bits. By using the dma_alloc_coherent_mask function - it does the proper casting and we get 0xfffffffff. This caused not working sound on a system with 4 GB and a 64-bit compatible sound-card with sets the DMA-mask to 64bit. On bare-metal and the forward-ported xen-dom0 patches from OpenSuse a coherent DMA-memory is always allocated inside the 32-bit address-range by calling dma_alloc_coherent_mask. This patch adds the same functionality to xen swiotlb and is a rebase of the original patch from Ronny Hegewald which never got upstream b/c the underlaying reason was not understood until now. The original email with the original patch is in: http://old-list-archives.xen.org/archives/html/xen-devel/2010-02/msg00038.html the original thread from where the discussion started is in: http://old-list-archives.xen.org/archives/html/xen-devel/2010-01/msg00928.html Signed-off-by:
Ronny Hegewald <ronny.hegewald@online.de> Signed-off-by:
Stefano Panella <stefano.panella@citrix.com> Acked-By:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Mel Gorman authored
commit bba3d8c3 upstream. The following build error occured during a parisc build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Bruce Allan authored
commit d821a4c4 upstream. With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit c1c52848 upstream. omapfb does not currently set pseudo palette correctly for color depths above 16bpp, making red text invisible, command like echo -e '\e[0;31mRED' > /dev/tty1 will display nothing on framebuffer console in 24bpp mode. This is because temporary variable is declared incorrectly, fix it. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Dave Airlie authored
commit c4903429 upstream. This will cause udev to load vmwgfx instead of waiting for X to do it. Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Artem Bityutskiy authored
commit 78b495c3 upstream. UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875c UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by:
Richard Genoud <richard.genoud@gmail.com> Tested-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 7b125b94 upstream. They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620 Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 67ddbb3e upstream. This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS device. (The USB IDs were already present in hid-ids.h, apparently under a different name.) Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Laurent Bigonville <l.bigonville@edpnet.be> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
James Ralston authored
commit 4a8f1ddd upstream. Add the SMBus Device IDs for the Intel Lynx Point-LP PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Axel Lin authored
commit e68bb91b upstream. This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE. Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as built-in or module, we also need to export the functions in i2c-designware-core. This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y: LD drivers/i2c/busses/built-in.o drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int': i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init': i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl': i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr': i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer': i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled': i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel': i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg': i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable': i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param': i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable': i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func': i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int': i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here make[3]: *** [drivers/i2c/busses/built-in.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit c9e67d48 upstream. In some cases fuse_retrieve() would return a short byte count if offset was non-zero. The data returned was correct, though. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 156bddd8 upstream. Code tracking when transaction needs to be committed on fdatasync(2) forgets to handle a situation when only inode's i_size is changed. Thus in such situations fdatasync(2) doesn't force transaction with new i_size to disk and that can result in wrong i_size after a crash. Fix the issue by updating inode's i_datasync_tid whenever its size is updated. Reported-by:
Kristian Nielsen <knielsen@knielsen-hq.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 9c2fc0de upstream. When a file is stored in ICB (inode), we overwrite part of the file, and the page containing file's data is not in page cache, we end up corrupting file's data by overwriting them with zeros. The problem is we use simple_write_begin() which simply zeroes parts of the page which are not written to. The problem has been introduced by be021ee4 (udf: convert to new aops). Fix the problem by providing a ->write_begin function which makes the page properly uptodate. Reported-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
James Bottomley authored
commit 14216561 upstream. This is a particularly nasty SCSI ATA Translation Layer (SATL) problem. SAT-2 says (section 8.12.2) if the device is in the stopped state as the result of processing a START STOP UNIT command (see 9.11), then the SATL shall terminate the TEST UNIT READY command with CHECK CONDITION status with the sense key set to NOT READY and the additional sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED; mpt2sas internal SATL seems to implement this. The result is very confusing standby behaviour (using hdparm -y). If you suspend a drive and then send another command, usually it wakes up. However, if the next command is a TEST UNIT READY, the SATL sees that the drive is suspended and proceeds to follow the SATL rules for this, returning NOT READY to all subsequent commands. This means that the ordering of TEST UNIT READY is crucial: if you send TUR and then a command, you get a NOT READY to both back. If you send a command and then a TUR, you get GOOD status because the preceeding command woke the drive. This bit us badly because commit 85ef06d1 Author: Tejun Heo <tj@kernel.org> Date: Fri Jul 1 16:17:47 2011 +0200 block: flush MEDIA_CHANGE from drivers on close(2) Changed our ordering on TEST UNIT READY commands meaning that SATA drives connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas SATL sees the suspend *before* the drives get awoken by the next ATA command) resulting in lots of failed commands. The standard is completely nuts forcing this inconsistent behaviour, but we have to work around it. The fix for this is twofold: 1. Set the allow_restart flag so we wake the drive when we see it has been suspended 2. Return all TEST UNIT READY status directly to the mid layer without any further error handling which prevents us causing error handling which may offline the device just because of a media check TUR. Reported-by:
Matthias Prager <linux@matthiasprager.de> Signed-off-by:
-
sreekanth.reddy@lsi.com authored
SCSI: mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value commit 338b131a upstream. If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by:
-
Mike Snitzer authored
commit 27c41973 upstream. The following v3.4-rc1 commit unmasked an existing bug in scsi_io_completion's SG_IO error handling: 47ac56db [SCSI] scsi_error: classify some ILLEGAL_REQUEST sense as a permanent TARGET_ERROR Given that certain ILLEGAL_REQUEST are now properly categorized as TARGET_ERROR the host_byte is being set (before host_byte wasn't ever set for these ILLEGAL_REQUEST). In scsi_io_completion, initialize req->errors with cmd->result _after_ the SG_IO block that calls __scsi_error_from_host_byte (which may modify the host_byte). Before this fix: cdb to send: 12 01 01 00 00 00 ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00], mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0, status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b, 00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0x10, driver_status=0x8, resid=0, duration=0, info=0x1}) = 0 SCSI Status: Check Condition Sense Information: sense buffer empty After: cdb to send: 12 01 01 00 00 00 ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00], mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0, status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b, 00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0, driver_status=0x8, resid=0, duration=0, info=0x1}) = 0 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 0b 00 00 00 00 24 00 00 00 00 00 00 Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Tested-by:
Mike Snitzer <snitzer@redhat.com> Reviewed-by:
Babu Moger <babu.moger@netapp.com> Signed-off-by:
-
Kashyap Desai authored
commit bd8d6dd4 upstream. The following patch moves the poll_aen_lock initializer from megasas_probe_one() to megasas_init(). This prevents a crash when a user loads the driver and tries to issue a poll() system call on the ioctl interface with no adapters present. Signed-off-by:
Kashyap Desai <Kashyap.Desai@lsi.com> Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit ab6f148d upstream. A usbnet device can share a multifunction device with a storage device. If the storage device is autoresumed the usbnet devices also needs to be autoresumed. Allocating memory with GFP_KERNEL can deadlock in this case. This should go back into all kernels that have commit 65841fd5 That is 3.5 Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Mikulas Patocka authored
commit ed6fe9d6 upstream. Commit 644595f8 ("compat: Handle COMPAT_USE_64BIT_TIME in net/socket.c") introduced a bug where the helper functions to take either a 64-bit or compat time[spec|val] got the arguments in the wrong order, passing the kernel stack pointer off as a user pointer (and vice versa). Because of the user address range check, that in turn then causes an EFAULT due to the user pointer range checking failing for the kernel address. Incorrectly resuling in a failed system call for 32-bit processes with a 64-bit kernel. On odder architectures like HP-PA (with separate user/kernel address spaces), it can be used read kernel memory. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Jones authored
commit 80de7c31 upstream. Trivially triggerable, found by trinity: kernel BUG at mm/mempolicy.c:2546! Process trinity-child2 (pid: 23988, threadinfo ffff88010197e000, task ffff88007821a670) Call Trace: show_numa_map+0xd5/0x450 show_pid_numa_map+0x13/0x20 traverse+0xf2/0x230 seq_read+0x34b/0x3e0 vfs_read+0xac/0x180 sys_pread64+0xa2/0xc0 system_call_fastpath+0x1a/0x1f RIP: mpol_to_str+0x156/0x360 Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Paul Mackerras authored
commit 9fb1b36c upstream. We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Reported-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
commit 71433285 upstream. During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
commit 1021cb26 upstream. If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by:
-
Anton Blanchard authored
commit 00ca0de0 upstream. When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by:
-
Anton Blanchard authored
commit 1b6ca2a6 upstream. Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by:
-
Daniel Mack authored
commit 2e4a263c upstream. Commit 68e67f40 ("ALSA: snd-usb: move calls to usb_set_interface") saved us some unnecessary calls to snd_usb_set_interface() but ignored the fact that there is at least one device out there which operates on two endpoint in different interfaces simultaniously. Take care for this by catching the case where data and sync endpoints are located on different interfaces and calling snd_usb_set_interface() between the start of the two endpoints. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Robert M. Albrecht <linux@romal.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Daniel Mack authored
commit 245baf98 upstream. In order to support devices with implicit feedback streaming models, packet sizes are now stored with each individual urb, and the PCM handling code which fills the buffers purely relies on the size fields now. However, calling snd_usb_audio_next_packet_size() for all possible packets in an URB at once, prior to letting the PCM code do its job does in fact not lead to the same behaviour than what the old code did: The PCM code will break its loop once a period boundary is reached, consequently using up less packets that it really could. As snd_usb_audio_next_packet_size() implements a feedback mechanism to the endpoints phase accumulator, the number of calls to that function matters, and when called too often, the data rate runs out of bounds. Fix this by making the next_packet function public, and call it from the PCM code as before if the packet data sizes are not defined. Signed-off-by:
-
Daniel Mack authored
commit fbcfbf5f upstream. Parts of commit 294c4fb8 ("ALSA: usb: refine delay information with USB frame counter") were unfortunately lost during the refactoring of the snd-usb driver in 3.5. This patch adds them back, restoring the correct delay information behaviour. Signed-off-by:
-
Pavel Roskin authored
commit 03d2f44e upstream. snd_usb_endpoint_free() frees the structure that contains its argument. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Daniel Mack authored
commit 015618b9 upstream. Commit e9ba389c ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") fixed a scheduling-while-atomic bug that happened when snd_usb_endpoint_start was called from the trigger callback, which is an atmic context. However, the patch breaks the idea of the endpoints reference counting, which is the reason why the driver has been refactored lately. Revert that commit and let snd_usb_endpoint_start() take care of the URB cancellation again. As this function is called from both atomic and non-atomic context, add a flag to denote whether the function may sleep. Signed-off-by:
-
Sven Schnelle authored
commit 99f347ca upstream. If a device specifies zero endpoints in its interface descriptor, the kernel oopses in acm_probe(). Even though that's clearly an invalid descriptor, we should test wether we have all endpoints. This is especially bad as this oops can be triggered by just plugging a USB device in. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
-
Greg Kroah-Hartman authored
commit d04dbd1c upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
Bjørn Mork <bjorn@mork.no> CC: Mauro Carvalho Chehab <mchehab@infradead.org> CC: Michael Krufky <mkrufky@linuxtv.org> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Doron Cohen <doronc@siano-ms.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit a3433179 upstream. This structure needs to always stick around, even if CONFIG_HOTPLUG is disabled, otherwise we can oops when trying to probe a device that was added after the structure is thrown away. Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down. Reported-by:
-
