- Mar 28, 2013
-
-
Greg Kroah-Hartman authored
-
Felix Fietkau authored
commit 6ef9e2f6 upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. [Backported for 3.8-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d7 3.9-rc1.] Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Lingzhu Xiang <lxiang@redhat.com> Reviewed-by:
CAI Qian <caiqian@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
commit 9d1400cf upstream. Atomic pool should always be allocated from DMA zone if such zone is available in the system to avoid issues caused by limited dma mask of any of the devices used for making an atomic allocation. Reported-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Mikhail Kshevetskiy authored
commit db9e5161 upstream. Commit 032ec49f (usb: musb: drop useless board_mode usage) introduced a typo that breaks the build. Signed-off-by:
Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> [ Fixed commit message ] Signed-off-by:
Michael Riesch <michael.riesch@omicron.at> Cc: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Johan Hovold authored
commit 5492bf3d upstream. Add missing get_icount field to two-port driver. The two-port driver was not updated when switching to the new icount interface in commit 0bca1b91 ("tty: Convert the USB drivers to the new icount interface"). Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 618aa106 upstream. Remove bogus disconnect test introduced by 95bef012 ("USB: more serial drivers writing after disconnect") which prevented queued data from being freed on disconnect. The possible IO it was supposed to prevent is long gone. Signed-off-by:
-
Jan Kara authored
commit 89b1f39e upstream. For large UDF filesystems with 512-byte blocks the number of necessary bitmap blocks is larger than 2^16 so s_nr_groups in udf_bitmap overflows (the number will overflow for filesystems larger than 128 GB with 512-byte blocks). That results in ENOSPC errors despite the filesystem has plenty of free space. Fix the problem by changing s_nr_groups' type to 'int'. That is enough even for filesystems 2^32 blocks (UDF maximum) and 512-byte blocksize. Reported-and-tested-by:
<v10lator@myway.de> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Jim Trigg <jtrigg@spamcop.net> Signed-off-by:
-
Rafael J. Wysocki authored
commit 33f767d7 upstream. Observe that acpi_get_child() doesn't need to use the helper struct acpi_find_child structure and change it to work without it. Also, using acpi_get_object_info() to get the output of _ADR for the given device is overkill, because that function does much more than just evaluating _ADR (let alone the additional memory allocation done by it). Moreover, acpi_get_child() doesn't need to loop any more once it has found a matching handle, so make it stop in that case. To prevent the results from changing, make it use do_acpi_find_child() as a post-order callback. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit ca0ba26f upstream. The 'CONFIG_' prefix is not implicit in IS_ENABLED(). Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Seth Forshee authored
commit ec0971ba upstream. We know that with some firmware implementations writing too much data to UEFI variables can lead to bricking machines. Recent changes attempt to address this issue, but for some it may still be prudent to avoid writing large amounts of data until the solution has been proven on a wide variety of hardware. Crash dumps or other data from pstore can potentially be a large data source. Add a pstore_module parameter to efivars to allow disabling its use as a backend for pstore. Also add a config option, CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE, to allow setting the default value of this paramter to true (i.e. disabled by default). Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Seth Forshee authored
commit ed9dc8ce upstream. Add a new option, CONFIG_EFI_VARS_PSTORE, which can be set to N to avoid using efivars as a backend to pstore, as some users may want to compile out the code completely. Set the default to Y to maintain backwards compatability, since this feature has always been enabled until now. Signed-off-by:
-
Johan Hovold authored
commit d7971051 upstream. Make sure the interface is not released before our serial device. Note that drivers are still not allowed to access the interface in any way that may interfere with another driver that may have gotten bound to the same interface after disconnect returns. Signed-off-by:
-
Andrzej Pietrasiewicz authored
commit 3416905b upstream. This patch fixes an "off-by-one" bug found in 581791f5 (FunctionFS: enable multiple functions). During gfs_bind/gfs_unbind the functionfs_bind/functionfs_unbind should be called for every functionfs instance. With the "i" pre-decremented they were not called for the zeroth instance. Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> [ balbi@ti.com : added offending commit's subject ] Signed-off-by:
-
Alan Stern authored
commit d714aaf6 upstream. This patch (as1670) fixes a regression caused by commit 6402c796 (USB: EHCI: work around silicon bug in Intel's EHCI controllers). The workaround goes through two IAA cycles for each QH being unlinked. During the first cycle, the QH is not added to the async_iaa list (because it isn't fully gone from the hardware yet), which means that list will be empty. Unfortunately, I forgot to update the IAA watchdog timer routine. It thinks that an empty async_iaa list means the timer expiration was an error, which isn't true any more. This problem didn't show up during initial testing because the controllers being tested all had working IAA interrupts. But not all controllers do, and when the watchdog timer expires, the empty-list check prevents the second IAA cycle from starting. As a result, URB unlinks never complete. The check needs to be removed. Among the symptoms of the regression are processes stuck in D wait states and hangs during system shutdown. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Stephen Warren <swarren@wwwdotorg.org> Reported-and-tested-by:
Sven Joachim <svenjoac@gmx.de> Reported-by:
Andreas Bombe <aeb@debian.org> Signed-off-by:
-
Alan Stern authored
commit 2a40f324 upstream. This patch (as1663) fixes a regression caused by commit 6e0c3339 (USB: EHCI: unlink one async QH at a time). In order to avoid keeping multiple QHs in an unusable intermediate state, that commit changed unlink_empty_async() so that it unlinks only one empty QH at a time. However, when the EHCI root hub is suspended, _all_ async QHs need to be unlinked. ehci_bus_suspend() used to do this by calling unlink_empty_async(), but now this only unlinks one of the QHs, not all of them. The symptom is that when the root hub is resumed, USB communications don't work for some period of time. This is because ehci-hcd doesn't realize it needs to restart the async schedule; it assumes that because some QHs are already on the schedule, the schedule must be running. The easiest way to fix the problem is add a new function that unlinks all the async QHs when the root hub is suspended. This patch should be applied to all kernels that have the 6e0c3339 commit. Signed-off-by:
Adrian Bassett <adrian.bassett@hotmail.co.uk> Signed-off-by:
-
Johan Hovold authored
commit cb25505f upstream. Unregister tty device in disconnect as is required by the USB stack. By deferring unregistration to when the last tty reference is dropped, the parent interface device can get unregistered before the child resulting in broken hotplug events being generated when the tty is finally closed: KERNEL[2290.798128] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:3.1 (usb) KERNEL[2290.804589] remove /devices/pci0000:00/0000:00:1d.7/usb2/2-1 (usb) KERNEL[2294.554799] remove /2-1:3.1/tty/ttyACM0 (tty) The driver must deal with tty callbacks after disconnect by checking the disconnected flag. Specifically, further opens must be prevented and this is already implemented. Acked-by:
Oliver Neukum <oneukum@suse.de> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Hannes Reinecke authored
commit 00eed9c8 upstream. xhci has its own interrupt enabling routine, which will try to use MSI-X/MSI if present. So the usb core shouldn't try to enable legacy interrupts; on some machines the xhci legacy IRQ setting is invalid. v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn) Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Frederik Himpe <fhimpe@vub.ac.be> Cc: David Haerdeman <david@hardeman.nu> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Reviewed-by:
Thomas Renninger <trenn@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Dmitry Torokhov authored
commit f8264340 upstream. According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1 of IMAN register. Previously their definitions were reversed. Even though there are no ill effects being observed from the swapped definitions (because IMAN_IP is RW1C and in legacy PCI case we come in with it already set to 1 so it was clearing itself even though we were setting IMAN_IE instead of IMAN_IP), we should still correct the values. This patch should be backported to kernels as old as 2.6.36, that contain the commit 4e833c0b "xhci: don't re-enable IE constantly". Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Signed-off-by:
-
CQ Tang authored
commit 66db3feb upstream. The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by:
CQ Tang <cq.tang@intel.com> Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Mark Rutland authored
commit a7dc19b8 upstream. Currently tick_check_broadcast_device doesn't reject clock_event_devices with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real hardware if they have a higher rating value. In this situation, the dummy timer is responsible for broadcasting to itself, and the core clockevents code may attempt to call non-existent callbacks for programming the dummy, eventually leading to a panic. This patch makes tick_check_broadcast_device always reject dummy timers, preventing this problem. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kent Overstreet authored
commit e49dbbf3 upstream. vfs_writev() updates the offset argument - but the code then passes the offset to vfs_fsync_range(). Since offset now points to the offset after what was just written, this is probably not what was intended Introduced by face1502 "nfsd: use vfs_fsync_range(), not O_SYNC, for stable writes". Signed-off-by:
Kent Overstreet <koverstreet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Reviewed-by:
Zach Brown <zab@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
commit f8dfcffd upstream. A number of problems can occur due to races between resync/recovery and discard. - if sync_request calls handle_stripe() while a discard is happening on the stripe, it might call handle_stripe_clean_event before all of the individual discard requests have completed (so some devices are still locked, but not all). Since commit ca64cae9 md/raid5: Make sure we clear R5_Discard when discard is finished. this will cause R5_Discard to be cleared for the parity device, so handle_stripe_clean_event() will not be called when the other devices do become unlocked, so their ->written will not be cleared. This ultimately leads to a WARN_ON in init_stripe and a lock-up. - If handle_stripe_clean_event() does clear R5_UPTODATE at an awkward time for resync, it can lead to s->uptodate being less than disks in handle_parity_checks5(), which triggers a BUG (because it is one). So: - keep R5_Discard on the parity device until all other devices have completed their discard request - make sure we don't try to have a 'discard' and a 'sync' action at the same time. This involves a new stripe flag to we know when a 'discard' is happening, and the use of R5_Overlap on the parity disk so when a discard is wanted while a sync is active, so we know to wake up the discard at the appropriate time. Discard support for RAID5 was added in 3.7, so this is suitable for any -stable kernel since 3.7. Reported-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Jonathan Brassow authored
commit e3620a3a upstream. MD RAID5: Fix kernel oops when RAID4/5/6 is used via device-mapper Commit a9add5d9 (v3.8-rc1) added blktrace calls to the RAID4/5/6 driver. However, when device-mapper is used to create RAID4/5/6 arrays, the mddev->gendisk and mddev->queue fields are not setup. Therefore, calling things like trace_block_bio_remap will cause a kernel oops. This patch conditionalizes those calls on whether the proper fields exist to make the calls. (Device-mapper will call trace_block_bio_remap on its own.) This patch is suitable for the 3.8.y stable kernel. Signed-off-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
NeilBrown authored
commit ce7d363a upstream. Since commit 1ed850f3 md/raid5: make sure to_read and to_write never go negative. It has been possible for handle_stripe_dirtying to be called when there isn't actually any work to do. It then calls schedule_reconstruction() which will set R5_LOCKED on the parity block(s) even when nothing else is happening. This then causes problems in do_release_stripe(). So add checks to schedule_reconstruction() so that if it doesn't find anything to do, it just aborts. This bug was introduced in v3.7, so the patch is suitable for -stable kernels since then. Reported-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
-
Takahisa Tanaka authored
commit 18e43212 upstream. A problem was found on PC's with the SB700 chipset: The PC fails to load BIOS after running the 3.8.x kernel until the power is completely cut off. It occurs in all 3.8.x versions and the mainline version as of 2/4. The issue does not occur with the 3.7.x builds. There are two methods for accessing the watchdog registers. 1. Re-programming a resource address obtained by allocate_resource() to chipset. 2. Use the direct memory-mapped IO access. The method 1 can be used by all the chipsets (SP5100, SB7x0, SB8x0 or later). However, experience shows that only PC with the SB8x0 (or later) chipsets can use the method 2. This patch removes the method 1, because the critical problem was found. That's why the watchdog timer was able to be used on SP5100 and SB7x0 chipsets until now. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1116835 Link: https://lkml.org/lkml/2013/2/14/271 Signed-off-by:
Takahisa Tanaka <mc74hc00@gmail.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Takahisa Tanaka authored
commit 81fc933f upstream. The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current sp5100_tco driver is using bit 2. See 2.3.3 Power Management (PM) Registers page 150 of the AMD SB800-Series Southbridges Register Reference Guide [1]. AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h] Field Name Bits Default Description AcpiMMioDecodeEn 0 0b Set to 1 to enable AcpiMMio space. AcpiMMIoSel 1 0b Set AcpiMMio registers to be memory-mapped or IO-mapped space. 0: Memory-mapped space 1: I/O-mapped space The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1). Fortunately, no problems were caused by this typo, because the default value of the undocumented misused bit 2 seems to be zero. However, the sp5100_tco driver should use the correct bitmask value. [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdf Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Mike Marciniszyn authored
commit 1ee9e2aa upstream. Commit f0dc117a ("IPoIB: Fix TX queue lockup with mixed UD/CM traffic") attempts to solve an issue where unprocessed UD send completions can deadlock the netdev. The patch doesn't fully resolve the issue because if more than half the tx_outstanding's were UD and all of the destinations are RC reachable, arming the CQ doesn't solve the issue. This patch uses the IB_CQ_REPORT_MISSED_EVENTS on the ib_req_notify_cq(). If the rc is above 0, the UD send cq completion callback is called directly to re-arm the send completion timer. This issue is seen in very large parallel filesystem deployments and the patch has been shown to correct the issue. Reviewed-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Theodore Ts'o authored
commit 2b405bfa upstream. In data=journal mode, if we unmount the file system before a transaction has a chance to complete, when the journal inode is being evicted, we can end up calling into jbd2_log_wait_commit() for the last transaction, after the journalling machinery has been shut down. Arguably we should adjust ext4_should_journal_data() to return FALSE for the journal inode, but the only place it matters is ext4_evict_inode(), and so to save a bit of CPU time, and to make the patch much more obviously correct by inspection(tm), we'll fix it by explicitly not trying to waiting for a journal commit when we are evicting the journal inode, since it's guaranteed to never succeed in this case. This can be easily replicated via: mount -t ext4 -o data=journal /dev/vdb /vdb ; umount /vdb ------------[ cut here ]------------ WARNING: at /usr/projects/linux/ext4/fs/jbd2/journal.c:542 __jbd2_log_start_commit+0xba/0xcd() Hardware name: Bochs JBD2: bad log_start_commit: 3005630206 3005630206 0 0 Modules linked in: Pid: 2909, comm: umount Not tainted 3.8.0-rc3 #1020 Call Trace: [<c015c0ef>] warn_slowpath_common+0x68/0x7d [<c02b7e7d>] ? __jbd2_log_start_commit+0xba/0xcd [<c015c177>] warn_slowpath_fmt+0x2b/0x2f [<c02b7e7d>] __jbd2_log_start_commit+0xba/0xcd [<c02b8075>] jbd2_log_start_commit+0x24/0x34 [<c0279ed5>] ext4_evict_inode+0x71/0x2e3 [<c021f0ec>] evict+0x94/0x135 [<c021f9aa>] iput+0x10a/0x110 [<c02b7836>] jbd2_journal_destroy+0x190/0x1ce [<c0175284>] ? bit_waitqueue+0x50/0x50 [<c028d23f>] ext4_put_super+0x52/0x294 [<c020efe3>] generic_shutdown_super+0x48/0xb4 [<c020f071>] kill_block_super+0x22/0x60 [<c020f3e0>] deactivate_locked_super+0x22/0x49 [<c020f5d6>] deactivate_super+0x30/0x33 [<c0222795>] mntput_no_expire+0x107/0x10c [<c02233a7>] sys_umount+0x2cf/0x2e0 [<c02233ca>] sys_oldumount+0x12/0x14 [<c08096b8>] syscall_call+0x7/0xb ---[ end trace 6a954cc790501c1f ]--- jbd2_log_wait_commit: error: j_commit_request=-1289337090, tid=0 Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reviewed-by:
-
Lukas Czerner authored
commit 4f42f80a upstream. Currently when converting extent to initialized, we have to decide whether to zeroout part/all of the uninitialized extent in order to avoid extent tree growing rapidly. The decision is made by comparing the size of the extent with the configurable value s_extent_max_zeroout_kb which is in kibibytes units. However when converting it to number of blocks we currently use it as it was in bytes. This is obviously bug and it will result in ext4 _never_ zeroout extents, but rather always split and convert parts to initialized while leaving the rest uninitialized in default setting. Fix this by using s_extent_max_zeroout_kb as kibibytes. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Theodore Ts'o authored
commit 90ba983f upstream. A user who was using a 8TB+ file system and with a very large flexbg size (> 65536) could cause the atomic_t used in the struct flex_groups to overflow. This was detected by PaX security patchset: http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551 This bug was introduced in commit 9f24e420 , so it's been around since 2.6.30. :-( Fix this by using an atomic64_t for struct orlav_stats's free_clusters. Signed-off-by:
-
Dmitry Artamonow authored
commit 29f86e66 upstream. Device stucks on filesystem writes, unless following quirk is passed: echo 04e8:5136:m > /sys/module/usb_storage/parameters/quirks Add corresponding entry to unusual_devs.h Signed-off-by:
Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by:
-
Zheng Liu authored
commit 3a225670 upstream. This commit fixes a wrong return value of the number of the allocated blocks in ext4_split_extent. When the length of blocks we want to allocate is greater than the length of the current extent, we return a wrong number. Let's see what happens in the following case when we call ext4_split_extent(). map: [48, 72] ex: [32, 64, u] 'ex' will be split into two parts: ex1: [32, 47, u] ex2: [48, 64, w] 'map->m_len' is returned from this function, and the value is 24. But the real length is 16. So it should be fixed. Meanwhile in this commit we use right length of the allocated blocks when get_reserved_cluster_alloc in ext4_ext_handle_uninitialized_extents is called. Signed-off-by:
Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
Jan Kara authored
commit ad56edad upstream. jbd2_journal_dirty_metadata() didn't get a reference to journal_head it was working with. This is OK in most of the cases since the journal head should be attached to a transaction but in rare occasions when we are journalling data, __ext4_journalled_writepage() can race with jbd2_journal_invalidatepage() stripping buffers from a page and thus journal head can be freed under hands of jbd2_journal_dirty_metadata(). Fix the problem by getting own journal head reference in jbd2_journal_dirty_metadata() (and also in jbd2_journal_set_triggers() which can possibly have the same issue). Reported-by:
Zheng Liu <gnehzuil.liu@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit f853c616 upstream. We've had several reports of people attempting to mount Windows 8 shares and getting failures with a return code of -EINVAL. The default sec= mode changed recently to sec=ntlmssp. With that, we expect and parse a SPNEGO blob from the server in the NEGOTIATE reply. The current decode_negTokenInit function first parses all of the mechTypes and then tries to parse the rest of the negTokenInit reply. The parser however currently expects a mechListMIC or nothing to follow the mechTypes, but Windows 8 puts a mechToken field there instead to carry some info for the new NegoEx stuff. In practice, we don't do anything with the fields after the mechTypes anyway so I don't see any real benefit in continuing to parse them. This patch just has the kernel ignore the fields after the mechTypes. We'll probably need to reinstate some of this if we ever want to support NegoEx. Reported-by:
Jason Burgess <jason@jacknife2.dns2go.com> Reported-by:
Yan Li <elliot.li.tech@gmail.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Mateusz Guzik authored
commit 24261fc2 upstream. cifsFileInfo objects hold references to dentries and it is possible that these will still be around in workqueues when VFS decides to kill super block during unmount. This results in panics like this one: BUG: Dentry ffff88001f5e76c0{i=66b4a,n=1M-2} still in use (1) [unmount of cifs cifs] ------------[ cut here ]------------ kernel BUG at fs/dcache.c:943! [..] Process umount (pid: 1781, threadinfo ffff88003d6e8000, task ffff880035eeaec0) [..] Call Trace: [<ffffffff811b44f3>] shrink_dcache_for_umount+0x33/0x60 [<ffffffff8119f7fc>] generic_shutdown_super+0x2c/0xe0 [<ffffffff8119f946>] kill_anon_super+0x16/0x30 [<ffffffffa036623a>] cifs_kill_sb+0x1a/0x30 [cifs] [<ffffffff8119fcc7>] deactivate_locked_super+0x57/0x80 [<ffffffff811a085e>] deactivate_super+0x4e/0x70 [<ffffffff811bb417>] mntput_no_expire+0xd7/0x130 [<ffffffff811bc30c>] sys_umount+0x9c/0x3c0 [<ffffffff81657c19>] system_call_fastpath+0x16/0x1b Fix this by making each cifsFileInfo object hold a reference to cifs super block, which implicitly keeps VFS super block around as well. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Reviewed-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Alex Deucher authored
commit fa8d387d upstream. Fixes a segfault on asics without a blit callback. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62239 Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 8f612b23 upstream. Need to adjust the backend map depending on which RB is enabled. This is the trinity equivalent of: f7eb9730 May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by:
-
Alex Deucher authored
commit fa3daf9a upstream. We weren't properly tearing down the VM sub-alloctor on suspend leading to bogus VM PTs on resume. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60439 Reviewed-by:
Christian König <christian.koenig@amd.com> Tested-by:
Dmitry Cherkasov <Dmitrii.Cherkasov@amd.com> Signed-off-by:
-
Alex Deucher authored
commit e4d17063 upstream. Richland APUs are a new version of the Trinity APUs with performance and power management improvements. Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit b75bbaa0 upstream. Reviewed-by:
-
