- May 14, 2021
-
-
Robert Nelson authored
5.4.106-ti-xenomai-r29 bb.org_defconfig AUFS: https://github.com/sfjro/aufs5-standalone/commit/1d622ad812e528026bafd13b59d1ccdb185437df BBDTBS: https://github.com/beagleboard/BeagleBoard-DeviceTrees/commit/b65a3e5aa5b13b1ccb9097eba2f091c8958b2e8c CAN-ISOTP: https://github.com/hartkopp/can-isotp/commit/b312dbd5e720833cb69bc65af3670a52dd1e93ca TI_AMX3_CM3: http://git.ti.com/gitweb/?p=processor-firmware/ti-amx3-cm3-pm-firmware.git;a=commit;h=fb484c5e54f2e31cf0a338d2927a06a2870bcc2c Signed-off-by:
Robert Nelson <robertcnelson@gmail.com>
-
Robert Nelson authored
-
http://gfnd.rcn-ee.org:8080Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Reference: v5.10.37 Signed-off-by: -
Andrzej Hajda authored
During probe every time driver gets resource it should usually check for error printk some message if it is not -EPROBE_DEFER and return the error. This pattern is simple but requires adding few lines after any resource acquisition code, as a result it is often omitted or implemented only partially. dev_err_probe helps to replace such code sequences with simple call, so code: if (err != -EPROBE_DEFER) dev_err(dev, ...); return err; becomes: return dev_err_probe(dev, err, ...); Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Rafael J. Wysocki <rafael@kernel.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200713144324.23654-2-a.hajda@samsung.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Kridner authored -
-
Robert Nelson authored
already default on BBB/X15, just calcuated everybootup Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
hack: gpiolib: yes we have drivers stomping on each other, we need to find a better way to share gpio... Signed-off-by: -
Robert Nelson authored
Authors: Pantelis Antoniou <panto@antoniou-consulting.com> Charles Steinkuehler <charles@steinkuehler.net> Jason Kridner <jdk@ti.com> Robert Nelson <robertcnelson@gmail.com> Tobias Müller <Tobias_Mueller@twam.info> Matthijs van Duin <matthijsvanduin@gmail.com> This patch was derived from 19 commits: https://github.com/RobertCNelson/linux-dev/tree/35e301ae8436e9f56f65bf1a7440021eda42f948/patches/drivers/ti/gpio Signed-off-by:
-
frost authored
-
bigguiness@gmail.com authored
------=_Part_422_1349561576.1515022447432 Content-Type: text/plain; charset="UTF-8" Hello all, The TI touch screen driver does not work _right_ with the libts-bin package in the jessie image. $ cat /etc/dogtag BeagleBoard.org Debian Image 2018-01-01 $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.10 (jessie) Release: 8.10 Codename: jessie $ dpkg -l | grep libts-bin ii libts-bin 1.14-1rcnee0~jessie+20171122 armhf touch screen library utilities $ sudo ts_calibrate ts_setup: No such file or directory It is possible to make it work by setting the TSLIB_TSDEVICE environment variable: $ sudo su # export TSLIB_TSDEVICE=/dev/input/event2 # ts_calibrate But, that's a bit of a pain since the environment variable always needs to be set in order to use the touchscreen. It appears that this version of the utilities uses the INPUT_PROP_DIRECT propbit to automatically detect which /dev/input/event device is the touchscreen. It looks like the following is the only change needed to make it work. Unfortunately, I don't have currently have a way to build a custom kernel for the BeagleBone in order to test it. If there is anyone that could I would appreciate it. Regards, Hartley -
Robert Nelson authored
Signed-off-by: -
Jay at Control Module Industries authored
I have encountered the same issue(s) on A6A boards. I couldn't find a patch, so I wrote this patch to update the device tree in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I would welcome any input on a different approach. https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ v4.1-rcX: added hack around CONFIG_OF_OVERLAY v4.2-rc3+: added if (of_machine_is_compatible("ti,am335x-bone")) so we do not break dual ethernet am335x devices Signed-off-by:
-
Pantelis Antoniou authored
-
Robert Nelson authored
Signed-off-by: -
Shivamurthy Shastri authored
Add compatible string for Micron SPI NOR Authenta device. Signed-off-by:
Shivamurthy Shastri <sshivamurthy@micron.com> Link: https://lore.kernel.org/r/20210419204015.1769-1-sshivamurthy@micron.com Signed-off-by:
-
Robert Nelson authored
This reverts commit 956b200a. Signed-off-by:
-
Robert Nelson authored
Signed-off-by: -
Dimitar Dimitrov authored
PRU IRAM addresses need to be masked before being handled to remoteproc. This is due to PRU Binutils' lack of separate address spaces for IRAM and DRAM. Signed-off-by:Dimitar Dimitrov <dinuxbg@gmail.com>
-
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
Signed-off-by: -
Robert Nelson authored
v5.4.18-2021_0114 Signed-off-by: -
Robert Nelson authored
Reference: v5.4.18 Signed-off-by: -
Robert Nelson authored
Reference: v5.5.19 Signed-off-by: -
Robert Nelson authored
Reference: 1657f11c Signed-off-by:
-
Robert Nelson authored
Reference: v5.4.119 Signed-off-by: -
Robert Nelson authored
Reference: v5.12.4 Signed-off-by: -
Robert Nelson authored
Reference: v5.12.4 Signed-off-by: -
Robert Nelson authored
-
Robert Nelson authored
-
-
-
-
Jason Kridner authored
From https://github.com/statropy/wpanusb
-
-
Robert Nelson authored
Signed-off-by:
-
